ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2025-01-13 16:31:09 +00:00
Code Issues Actions 7 Packages Projects Releases Wiki Activity
8eeb57acb7
openwrt/target/linux/bcm63xx/patches-5.4/515-board-bcm6348.patch
Ahmed Naseef 8eeb57acb7 bcm63xx: Add support for D-Link DSL-2750u rev C1 
This adds support for the D-Link DSL-2750u rev C1.
(https://deviwiki.com/wiki/D-Link_DSL-2750U_rev_C1)

It uses the same hardware as ADB P.DG A4001N.
CPU:   Broadcom BCM63281 (320 MHz)
RAM:   32M (Winbond W9725G6JB)
Flash:   8M (MXIC MX25L6445E)
Ethernet:   4x 100 Mbps
Wireless:   802.11b/g/n: BCM43225
USB:   1x 2.0

Flash instructions:

1.  Assign static IP 192.168.1.100 to PC
2.  Unplug the power source
3.  Press the RESET button at the router, don't release it yet!
4.  Plug the power source.Wait some seconds
5.  Release the RESET button
6.  Browse to http://192.168.1.1
7.  Send the openwrt-bcm63xx-generic-DSL2750U-C1-squashfs-cfe.bin and
    wait some minutes until the firmware upgrade finish.

Signed-off-by: Ahmed Naseef <naseefkm@gmail.com>
[DTS improvements, proper board patch, refresh patches]
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-12-05 10:51:22 +01:00

329 lines
7.1 KiB
Diff
Raw Blame History

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -1092,6 +1092,275 @@ static struct board_info __initdata boar
.has_ohci0 = 1,
};
+
+static struct board_info __initdata board_96348A_122 = {
+ .name = "96348A-122",
+ .expected_cpu_id = 0x6348,
+
+ .has_pci = 1,
+ .has_ohci0 = 1,
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .use_fallback_sprom = 1,
+ .fallback_sprom = {
+ .type = SPROM_BCM4318,
+ .pci_bus = 0,
+ .pci_dev = 1,
+ },
+};
+
+static struct board_info __initdata board_96348_D4PW = {
+ .name = "D-4P-W",
+ .expected_cpu_id = 0x6348,
+
+ .has_pci = 1,
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+};
+
+static struct board_info __initdata board_96348gw_10_AR1004G = {
+ .name = "AR1004G",
+ .expected_cpu_id = 0x6348,
+
+ .has_pci = 1,
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+};
+
+static struct board_info __initdata board_96348sv = {
+ .name = "MAGIC",
+ .expected_cpu_id = 0x6348,
+
+ .has_pccard = 1,
+ .has_pci = 1,
+ .has_ohci0 = 1,
+
+ .has_enet0 = 1,
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+
+ .has_enet1 = 1,
+ .enet1 = {
+ /* it has BP_ENET_EXTERNAL_PHY */
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+};
+
+/* NetGear DG834G v4 */
+static struct board_info __initdata board_96348W3 = {
+ .name = "96348W3",
+ .expected_cpu_id = 0x6348,
+
+ .has_pci = 1,
+ .has_ohci0 = 1,
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+};
+
+static struct board_info __initdata board_CPVA502plus = {
+ .name = "CPVA502+",
+ .expected_cpu_id = 0x6348,
+
+ .has_pci = 1,
+ .ephy_reset_gpio = 4,
+ .ephy_reset_gpio_flags = GPIO_ACTIVE_LOW,
+
+ .has_enet0 = 1,
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ },
+
+ .use_fallback_sprom = 1,
+ .fallback_sprom = {
+ .type = SPROM_BCM4318,
+ .pci_bus = 0,
+ .pci_dev = 1,
+ },
+};
+
+static struct board_info __initdata board_ct536_ct5621 = {
+ .name = "CT536_CT5621",
+ .expected_cpu_id = 0x6348,
+
+ .has_pccard = 1,
+ .has_pci = 1,
+ .has_ohci0 = 1,
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .use_fallback_sprom = 1,
+ .fallback_sprom = {
+ .type = SPROM_BCM4318,
+ .pci_bus = 0,
+ .pci_dev = 1,
+ },
+};
+
+static struct board_info __initdata board_FAST2604 = {
+ .name = "F@ST2604",
+ .expected_cpu_id = 0x6348,
+
+ .has_pci = 1,
+ .has_ohci0 = 1,
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+};
+
+static struct board_info __initdata board_gw6000 = {
+ .name = "GW6000",
+ .expected_cpu_id = 0x6348,
+
+ .has_pci = 1,
+ .has_ohci0 = 1,
+
+ .has_enet0 = 1,
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+};
+
+static struct board_info __initdata board_gw6200 = {
+ .name = "GW6200",
+ .expected_cpu_id = 0x6348,
+
+ .has_pci = 1,
+ .has_ohci0 = 1,
+
+ .has_enet0 = 1,
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+};
+
+static struct sprom_fixup __initdata spw500v_fixups[] = {
+ { .offset = 46, .value = 0x3046 },
+ { .offset = 47, .value = 0x15a7 },
+ { .offset = 48, .value = 0xfa89 },
+ { .offset = 49, .value = 0xfe79 },
+ { .offset = 57, .value = 0x6a49 },
+};
+
+static struct board_info __initdata board_spw500v = {
+ .name = "SPW500V",
+ .expected_cpu_id = 0x6348,
+
+ .has_pci = 1,
+
+ .has_enet0 = 1,
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+
+ .use_fallback_sprom = 1,
+ .fallback_sprom = {
+ .type = SPROM_BCM4318,
+ .pci_bus = 0,
+ .pci_dev = 1,
+ .board_fixups = spw500v_fixups,
+ .num_board_fixups = ARRAY_SIZE(spw500v_fixups),
+ },
+};
+
+/* BT Voyager 2110 */
+static struct board_info __initdata board_V2110 = {
+ .name = "V2110",
+ .expected_cpu_id = 0x6348,
+
+ .has_pci = 1,
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+};
+
+static struct board_info __initdata board_V2500V_BB = {
+ .name = "V2500V_BB",
+ .expected_cpu_id = 0x6348,
+
+ .has_pci = 1,
+
+ .has_enet0 = 1,
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+};
#endif /* CONFIG_BCM63XX_CPU_6348 */
/*
@@ -1248,6 +1517,19 @@ static const struct board_info __initcon
&board_DV201AMR,
&board_96348gw_a,
&board_rta1025w_16,
+ &board_96348A_122,
+ &board_96348_D4PW,
+ &board_96348gw_10_AR1004G,
+ &board_96348sv,
+ &board_96348W3,
+ &board_CPVA502plus,
+ &board_ct536_ct5621,
+ &board_FAST2604,
+ &board_gw6000,
+ &board_gw6200,
+ &board_spw500v,
+ &board_V2110,
+ &board_V2500V_BB,
#endif /* CONFIG_BCM63XX_CPU_6348 */
#ifdef CONFIG_BCM63XX_CPU_6358
&board_96358vw,
@@ -1296,15 +1578,29 @@ static struct of_device_id const bcm963x
{ .compatible = "dynalink,rta770w", .data = &board_rta770w, },
#endif /* CONFIG_BCM63XX_CPU_6345 */
#ifdef CONFIG_BCM63XX_CPU_6348
+ { .compatible = "asmax,ar-1004g", .data = &board_96348gw_10_AR1004G, },
{ .compatible = "belkin,f5d7633", .data = &board_96348gw_10, },
{ .compatible = "brcm,bcm96348r", .data = &board_96348r, },
{ .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
{ .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },
{ .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
+ { .compatible = "bt,voyager-2110", .data = &board_V2110, },
+ { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, },
+ { .compatible = "comtrend,ct-5365", .data = &board_96348A_122, },
+ { .compatible = "comtrend,ct-536plus", .data = &board_ct536_ct5621, },
+ { .compatible = "comtrend,ct-5621", .data = &board_ct536_ct5621, },
+ { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
{ .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
{ .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
{ .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
+ { .compatible = "netgear,dg834g-v4", .data = &board_96348W3, },
{ .compatible = "sagem,fast-2404", .data = &board_FAST2404, },
+ { .compatible = "sagem,fast-2604", .data = &board_FAST2604, },
+ { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
+ { .compatible = "tecom,gw6000", .data = &board_gw6000, },
+ { .compatible = "tecom,gw6200", .data = &board_gw6200, },
+ { .compatible = "telsey,cpva502plus", .data = &board_CPVA502plus, },
+ { .compatible = "telsey,magic", .data = &board_96348sv, },
{ .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
{ .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, },
#endif /* CONFIG_BCM63XX_CPU_6348 */
Reference in New Issue View Git Blame Copy Permalink