This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git.
Go to file
Christian Marangi 8eab5b2526
ipq806x: enable and setup multi-CPU port for qca8k switch
Enable and setup multi-cpu for qca8k switch for ipq806x based devices.

Rework each DTS to enable the secondary CPU port on QCA8K switch and
apply the required values originally set by the OEM in the old swconfig
node.

In original firmware the first CPU port was always assigned to the WAN
port and the secondary CPU port was assigned to the rest of the LAN
port. Follow this original implementation using an init.d script.

To setup the CPU port ip tools is required. Add additional default
package ip-tiny to correctly setup the CPU port.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-09-30 13:51:20 +02:00
.github uboot-bcm53xx: Add U-Boot for NorthStar BCM53xx 2023-08-20 18:08:13 +02:00
config kernel: default ARM_PMU on for armsr/armv8 2023-08-15 15:55:00 +02:00
include build: replace SourceName with PKG_NAME compile unit name 2023-09-24 19:33:53 +02:00
LICENSES LICENSES: include all used licenses in LICENSES directory 2021-02-14 19:21:38 +01:00
package hostapd: increase PKG_RELEASE to fix builds 2023-09-29 11:26:49 +02:00
scripts scripts/download.pl: Remove stale download sites and convert to https 2023-09-16 12:10:22 +02:00
target ipq806x: enable and setup multi-CPU port for qca8k switch 2023-09-30 13:51:20 +02:00
toolchain toolchain: assign PKG_CPE_ID 2023-09-19 20:22:59 +02:00
tools ccache: add missing \ 2023-09-24 12:49:50 +02:00
.gitattributes
.gitignore .gitignore: ignore link if target is included from feed 2023-07-26 17:45:11 +02:00
BSDmakefile
Config.in build: scripts/config - update to kconfig-v5.14 2022-02-19 13:10:01 +01:00
COPYING COPYING: add COPYING file to specify project licenses 2021-02-14 19:21:38 +01:00
feeds.conf.default Revert "feeds: use git-src-full to allow Git versioning" 2023-05-23 14:38:55 +02:00
Makefile treewide: add ORIG_PATH variable 2023-06-05 08:31:47 +02:00
README.md build: drop support for python 3.6 2023-05-22 13:23:35 +02:00
rules.mk prereq-build: increase GCC requirement to 8 2023-08-14 20:18:42 +02:00

OpenWrt logo

OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.

Sunshine!

Download

Built firmware images are available for many architectures and come with a package selection to be used as WiFi home router. To quickly find a factory image usable to migrate from a vendor stock firmware to OpenWrt, try the Firmware Selector.

If your device is supported, please follow the Info link to see install instructions or consult the support resources listed below.

An advanced user may require additional or specific package. (Toolchain, SDK, ...) For everything else than simple firmware download, try the wiki download page:

Development

To build your own firmware you need a GNU/Linux, BSD or MacOSX system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.

Requirements

You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.

binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.7+ rsync subversion unzip which

Quickstart

  1. Run ./scripts/feeds update -a to obtain all the latest package definitions defined in feeds.conf / feeds.conf.default

  2. Run ./scripts/feeds install -a to install symlinks for all obtained packages into package/feeds/

  3. Run make menuconfig to select your preferred configuration for the toolchain, target system & firmware packages.

  4. Run make to build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.

The main repository uses multiple sub-repositories to manage packages of different categories. All packages are installed via the OpenWrt package manager called opkg. If you're looking to develop the web interface or port packages to OpenWrt, please find the fitting repository below.

  • LuCI Web Interface: Modern and modular interface to control the device via a web browser.

  • OpenWrt Packages: Community repository of ported packages.

  • OpenWrt Routing: Packages specifically focused on (mesh) routing.

  • OpenWrt Video: Packages specifically focused on display servers and clients (Xorg and Wayland).

Support Information

For a list of supported devices see the OpenWrt Hardware Database

Documentation

Support Community

  • Forum: For usage, projects, discussions and hardware advise.
  • Support Chat: Channel #openwrt on oftc.net.

Developer Community

License

OpenWrt is licensed under GPL-2.0