David Bauer 8918c038f3 ath79: add support for AVM FRITZ!WLAN Repeater 1750E ... This commit adds support for the AVM Fritz!WLAN Repeater 1750E SOC: Qualcomm QCA9556 (Scorpion) 720MHz MIPS74Kc RAM: 64MB Zentel A3R12E40CBF DDR2 FLASH: 16MiB Winbond W25Q128 SPI NOR WLAN1: QCA9556 2.4 GHz 802.11b/g/n 3x3 WLAN2: QCA9880 5 GHz 802.11 n/ac 3x3 INPUT: WPS button LED: Power, WiFi, LAN, RSSI indicator Serial: Header Next to Black metal shield Pinout is 3.3V - RX - TX - GND (Square Pad is 3.3V) The Serial setting is 115200-8-N-1. Tested and working: - Ethernet - 2.4 GHz WiFi (correct MAC) - 5 GHz WiFi (correct MAC) - Installation via EVA bootloader - OpenWRT sysupgrade - Buttons - LEDs Installation via EVA: In the first seconds after Power is connected, the bootloader will listen for FTP connections on 192.168.178.1. Firmware can be uploaded like following: ftp> quote USER adam2 ftp> quote PASS adam2 ftp> binary ftp> debug ftp> passive ftp> quote MEDIA FLSH ftp> put openwrt-sysupgrade.bin mtd1 Note that this procedure might take up to two minutes. You need to powercycle the Device afterwards to boot OpenWRT. Signed-off-by: David Bauer <mail@david-bauer.net>		2020-04-17 13:27:40 +02:00
..
imagebuilder	build: refactor JSON info files to profiles.json	2020-04-03 12:17:45 +02:00
linux	ath79: add support for AVM FRITZ!WLAN Repeater 1750E	2020-04-17 13:27:40 +02:00
sdk	sdk: use bundle-libraries.sh to ship kernel objtool tools	2019-09-03 10:45:25 +02:00
toolchain	toolchain: wrapper.sh: harmonize leading whitespaces	2019-12-31 01:36:16 +01:00
Config.in	build: define RTC_SUPPORT as a bool	2020-04-09 12:51:10 +02:00
Makefile