mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 00:11:13 +00:00
0171157d45
The patches were generated from the RPi repo with the following command: git format-patch v6.6.44..rpi-6.6.y Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
144 lines
4.2 KiB
Diff
144 lines
4.2 KiB
Diff
From 199e611183de09ad91fe01fc79da78cc9d11ccb6 Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.com>
|
|
Date: Mon, 29 Jul 2024 11:12:38 +0100
|
|
Subject: [PATCH 1201/1215] spi: dw: Fix non-DMA transmit-only transfers
|
|
|
|
Ensure the transmit FIFO has emptied before ending the transfer by
|
|
dropping the TX threshold to 0 when the last byte has been pushed into
|
|
the FIFO. Include a similar fix for the non-IRQ paths.
|
|
|
|
See: https://github.com/raspberrypi/linux/issues/6285
|
|
Fixes: 6014649de765 ("spi: dw: Save bandwidth with the TMOD_TO feature")
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
|
---
|
|
drivers/spi/spi-dw-core.c | 62 +++++++++++++++++++++++++++++++++------
|
|
drivers/spi/spi-dw.h | 3 ++
|
|
2 files changed, 56 insertions(+), 9 deletions(-)
|
|
|
|
--- a/drivers/spi/spi-dw-core.c
|
|
+++ b/drivers/spi/spi-dw-core.c
|
|
@@ -220,6 +220,32 @@ int dw_spi_check_status(struct dw_spi *d
|
|
}
|
|
EXPORT_SYMBOL_NS_GPL(dw_spi_check_status, SPI_DW_CORE);
|
|
|
|
+static inline bool dw_spi_ctlr_busy(struct dw_spi *dws)
|
|
+{
|
|
+ return dw_readl(dws, DW_SPI_SR) & DW_SPI_SR_BUSY;
|
|
+}
|
|
+
|
|
+static enum hrtimer_restart dw_spi_hrtimer_handler(struct hrtimer *hr)
|
|
+{
|
|
+ struct dw_spi *dws = container_of(hr, struct dw_spi, hrtimer);
|
|
+
|
|
+ if (!dw_spi_ctlr_busy(dws)) {
|
|
+ spi_finalize_current_transfer(dws->host);
|
|
+ return HRTIMER_NORESTART;
|
|
+ }
|
|
+
|
|
+ if (!dws->idle_wait_retries) {
|
|
+ dev_err(&dws->host->dev, "controller stuck at busy\n");
|
|
+ spi_finalize_current_transfer(dws->host);
|
|
+ return HRTIMER_NORESTART;
|
|
+ }
|
|
+
|
|
+ dws->idle_wait_retries--;
|
|
+ hrtimer_forward_now(hr, dws->idle_wait_interval);
|
|
+
|
|
+ return HRTIMER_RESTART;
|
|
+}
|
|
+
|
|
static irqreturn_t dw_spi_transfer_handler(struct dw_spi *dws)
|
|
{
|
|
u16 irq_status = dw_readl(dws, DW_SPI_ISR);
|
|
@@ -246,7 +272,22 @@ static irqreturn_t dw_spi_transfer_handl
|
|
}
|
|
} else if (!dws->tx_len) {
|
|
dw_spi_mask_intr(dws, DW_SPI_INT_TXEI);
|
|
- spi_finalize_current_transfer(dws->host);
|
|
+ if (dw_spi_ctlr_busy(dws)) {
|
|
+ ktime_t period = ns_to_ktime(DIV_ROUND_UP(NSEC_PER_SEC, dws->current_freq));
|
|
+
|
|
+ /*
|
|
+ * Make the initial wait an underestimate of how long the transfer
|
|
+ * should take, then poll rapidly to reduce the delay
|
|
+ */
|
|
+ hrtimer_start(&dws->hrtimer,
|
|
+ period * (8 * dws->n_bytes - 1),
|
|
+ HRTIMER_MODE_REL);
|
|
+ dws->idle_wait_retries = 10;
|
|
+ dws->idle_wait_interval = period;
|
|
+ } else {
|
|
+ spi_finalize_current_transfer(dws->host);
|
|
+ }
|
|
+ return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
@@ -255,9 +296,13 @@ static irqreturn_t dw_spi_transfer_handl
|
|
* have the TXE IRQ flood at the final stage of the transfer.
|
|
*/
|
|
if (irq_status & DW_SPI_INT_TXEI) {
|
|
- if (!dws->tx_len)
|
|
- dw_spi_mask_intr(dws, DW_SPI_INT_TXEI);
|
|
dw_writer(dws);
|
|
+ if (!dws->tx_len) {
|
|
+ if (dws->rx_len)
|
|
+ dw_spi_mask_intr(dws, DW_SPI_INT_TXEI);
|
|
+ else
|
|
+ dw_writel(dws, DW_SPI_TXFTLR, 0);
|
|
+ }
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
@@ -428,7 +473,7 @@ static int dw_spi_poll_transfer(struct d
|
|
ret = dw_spi_check_status(dws, true);
|
|
if (ret)
|
|
return ret;
|
|
- } while (dws->rx_len);
|
|
+ } while (dws->rx_len || dws->tx_len || dw_spi_ctlr_busy(dws));
|
|
|
|
return 0;
|
|
}
|
|
@@ -652,11 +697,6 @@ static int dw_spi_write_then_read(struct
|
|
return 0;
|
|
}
|
|
|
|
-static inline bool dw_spi_ctlr_busy(struct dw_spi *dws)
|
|
-{
|
|
- return dw_readl(dws, DW_SPI_SR) & DW_SPI_SR_BUSY;
|
|
-}
|
|
-
|
|
static int dw_spi_wait_mem_op_done(struct dw_spi *dws)
|
|
{
|
|
int retry = DW_SPI_WAIT_RETRIES;
|
|
@@ -993,6 +1033,9 @@ int dw_spi_add_host(struct device *dev,
|
|
}
|
|
}
|
|
|
|
+ hrtimer_init(&dws->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
|
|
+ dws->hrtimer.function = dw_spi_hrtimer_handler;
|
|
+
|
|
ret = spi_register_controller(host);
|
|
if (ret) {
|
|
dev_err_probe(dev, ret, "problem registering spi host\n");
|
|
@@ -1018,6 +1061,7 @@ void dw_spi_remove_host(struct dw_spi *d
|
|
{
|
|
dw_spi_debugfs_remove(dws);
|
|
|
|
+ hrtimer_cancel(&dws->hrtimer);
|
|
spi_unregister_controller(dws->host);
|
|
|
|
if (dws->dma_ops && dws->dma_ops->dma_exit)
|
|
--- a/drivers/spi/spi-dw.h
|
|
+++ b/drivers/spi/spi-dw.h
|
|
@@ -180,6 +180,9 @@ struct dw_spi {
|
|
u32 current_freq; /* frequency in hz */
|
|
u32 cur_rx_sample_dly;
|
|
u32 def_rx_sample_dly_ns;
|
|
+ struct hrtimer hrtimer;
|
|
+ ktime_t idle_wait_interval;
|
|
+ int idle_wait_retries;
|
|
|
|
/* Custom memory operations */
|
|
struct spi_controller_mem_ops mem_ops;
|