mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 22:23:27 +00:00
0c7e78930b
Hardware highlights:
- SoC: Qualcomm Atheros IPQ8064/5 ARM Dual Core CPU
- RAM: (512MB or 1GB) DDR3 System Memory
- Storage: 32MB NOR (Cypress S25FL256S1)
256MB NAND (Micron MT29F2G08ABBEAH4)
- Ethernet: 5 x 1G via QCA8337N
- USB: 1 x USB 2.0/3.0 + 1 x USB 2.0 on mini PCIe3 socket
- PCIe: 3x mini PCIe (third mini PCIE3 is PCIe/USB shared)
- SIM Card Slot: 2 x Slot
- Buttons: Reset Button
- LEDs: 18x, 8x GPIO controllable
- Buzzer
The correct amount of RAM will be passed by the bootloader.
In contrast to the documentation provided by Compex, the third PCIe
doesn't use GPIO16 for PERST. Instead, GPIO3 is shared and used as PERST
for PCIe0 and PCIe2.
So far, no one was able to get USB 3.0 working with the 1GB RAM version,
while it works fine for my 512MB version. Since USB 3.0 doesn't work with
the Compex firmware for the 1G variant either, it could be a hardware
issue with these boards.
OpenWrt will be installed to the NAND flash. Make sure to have a full
working image on the NOR flash. It will be the backup in case anything
goes wrong.
It has been observed that an image loaded via tftpboot might have
bitflips. Hence the extra step to create a crc32 checksum to allow to
compare the checksum with the one from the source file prior to flashing.
In all cases it is necessary to set the following u-boot parameter to an
empty (whitespace) value, to ensure that the chosen bootargs of the dts
isn't overwritten or set to bogus - not working - values:
(IPQ) # set bootargs " "
(IPQ) # set fsbootargs " "
(IPQ) # saveenv
The sysupgrade image can be installed directly on flash using u-boot (put
jumper in JP13 (leave JP9 open) to boot from nand):
(IPQ) # set serverip 192.168.1.20
(IPQ) # set ipaddr 192.168.1.1
(IPQ) # tftpboot 0x42000000 openwrt-ipq806x-compex_wpq864-squashfs-nand-factory.bin
(IPQ) # crc32 0x42000000 $filesize
(IPQ) # nand erase 0x1340000 0x4000000
(IPQ) # nand write 0x42000000 0x1340000 $filesize
The initramfs image can be started using:
(IPQ) # set fdt_high 0x48000000
(IPQ) # tftpboot 0x44000000 openwrt-ipq806x-compex_wpq864-initramfs-fit-uImage.itb
(IPQ) # bootm 0x44000000
Signed-off-by: Christian Mehlis <christian@m3hlis.de>
Signed-off-by: Mathias Kresin <dev@kresin.me>
244 lines
7.0 KiB
Makefile
244 lines
7.0 KiB
Makefile
# Copyright (c) 2014 The Linux Foundation. All rights reserved.
|
|
#
|
|
include $(TOPDIR)/rules.mk
|
|
include $(INCLUDE_DIR)/image.mk
|
|
|
|
define Device/Default
|
|
PROFILES := Default
|
|
KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
|
|
KERNEL_INITRAMFS_PREFIX := $$(IMG_PREFIX)-$(1)-initramfs
|
|
KERNEL_PREFIX := $$(IMAGE_PREFIX)
|
|
KERNEL_LOADADDR = 0x42208000
|
|
SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
|
|
IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
|
|
IMAGE/sysupgrade.bin/squashfs :=
|
|
endef
|
|
|
|
define Device/LegacyImage
|
|
KERNEL_SUFFIX := -uImage
|
|
KERNEL = kernel-bin | append-dtb | uImage none
|
|
KERNEL_NAME := zImage
|
|
endef
|
|
|
|
define Device/FitImage
|
|
KERNEL_SUFFIX := -fit-uImage.itb
|
|
KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
|
|
KERNEL_NAME := Image
|
|
endef
|
|
|
|
define Device/FitImageLzma
|
|
KERNEL_SUFFIX := -fit-uImage.itb
|
|
KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb
|
|
KERNEL_NAME := Image
|
|
endef
|
|
|
|
define Device/UbiFit
|
|
KERNEL_IN_UBI := 1
|
|
IMAGES := nand-factory.bin nand-sysupgrade.bin
|
|
IMAGE/nand-factory.bin := append-ubi
|
|
IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
|
|
define Device/DniImage
|
|
KERNEL_SUFFIX := -uImage
|
|
KERNEL = kernel-bin | append-dtb | uImage none
|
|
KERNEL_NAME := zImage
|
|
NETGEAR_BOARD_ID :=
|
|
NETGEAR_HW_ID :=
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGES := factory.img sysupgrade.bin
|
|
IMAGE/factory.img := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakeroot-hdr | pad-to $$$$(KERNEL_SIZE) | append-ubi | netgear-dni
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakeroot-hdr | sysupgrade-tar kernel=$$$$@ | append-metadata
|
|
endef
|
|
DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
|
|
|
|
define Device/TpSafeImage
|
|
KERNEL_SUFFIX := -uImage
|
|
KERNEL = kernel-bin | append-dtb | uImage none
|
|
KERNEL_NAME := zImage
|
|
TPLINK_BOARD_ID :=
|
|
IMAGES := factory.bin sysupgrade.bin
|
|
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
|
|
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | append-metadata
|
|
endef
|
|
DEVICE_VARS += TPLINK_BOARD_ID
|
|
|
|
define Device/ZyXELImage
|
|
KERNEL_SUFFIX := -uImage
|
|
KERNEL = kernel-bin | append-dtb | uImage none | pad-to $${KERNEL_SIZE}
|
|
KERNEL_NAME := zImage
|
|
IMAGES := sysupgrade.bin mmcblk0p5-rootfs.bin mmcblk0p4-kernel.bin
|
|
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to $$$${BLOCKSIZE} | sysupgrade-tar rootfs=$$$$@ | append-metadata
|
|
IMAGE/mmcblk0p5-rootfs.bin := append-rootfs | pad-rootfs | pad-to $$$${BLOCKSIZE}
|
|
IMAGE/mmcblk0p4-kernel.bin := append-kernel
|
|
endef
|
|
|
|
define Device/compex_wpq864
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_DTS := qcom-ipq8064-wpq864
|
|
DEVICE_TITLE := Compex WPQ864
|
|
DEVICE_PACKAGES := kmod-gpio-beeper
|
|
endef
|
|
TARGET_DEVICES += compex_wpq864
|
|
|
|
define Device/linksys_ea8500
|
|
$(call Device/LegacyImage)
|
|
DEVICE_DTS := qcom-ipq8064-ea8500
|
|
PAGESIZE := 2048
|
|
BLOCKSIZE := 128k
|
|
KERNEL_SIZE := 3072k
|
|
KERNEL = kernel-bin | append-dtb | uImage none | append-uImage-fakeroot-hdr
|
|
BOARD_NAME := ea8500
|
|
SUPPORTED_DEVICES += ea8500
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGES := factory.bin sysupgrade.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$${KERNEL_SIZE} | append-ubi
|
|
DEVICE_TITLE := Linksys EA8500
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0
|
|
endef
|
|
TARGET_DEVICES += linksys_ea8500
|
|
|
|
define Device/netgear_d7800
|
|
$(call Device/DniImage)
|
|
DEVICE_DTS := qcom-ipq8064-d7800
|
|
KERNEL_SIZE := 2097152
|
|
NETGEAR_BOARD_ID := D7800
|
|
NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := d7800
|
|
SUPPORTED_DEVICES += d7800
|
|
DEVICE_TITLE := Netgear Nighthawk X4 D7800
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0
|
|
endef
|
|
TARGET_DEVICES += netgear_d7800
|
|
|
|
define Device/netgear_r7500
|
|
$(call Device/DniImage)
|
|
DEVICE_DTS := qcom-ipq8064-r7500
|
|
KERNEL_SIZE := 2097152
|
|
NETGEAR_BOARD_ID := R7500
|
|
NETGEAR_HW_ID := 29764841+0+128+256+3x3+4x4
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := r7500
|
|
SUPPORTED_DEVICES += r7500
|
|
DEVICE_TITLE := Netgear Nighthawk X4 R7500
|
|
DEVICE_PACKAGES := ath10k-firmware-qca988x
|
|
endef
|
|
TARGET_DEVICES += netgear_r7500
|
|
|
|
define Device/netgear_r7500v2
|
|
$(call Device/DniImage)
|
|
DEVICE_DTS := qcom-ipq8064-r7500v2
|
|
KERNEL_SIZE := 2097152
|
|
NETGEAR_BOARD_ID := R7500v2
|
|
NETGEAR_HW_ID := 29764958+0+128+512+3x3+4x4
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := r7500v2
|
|
SUPPORTED_DEVICES += r7500v2
|
|
DEVICE_TITLE := Netgear Nighthawk X4 R7500v2
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0 ath10k-firmware-qca988x
|
|
endef
|
|
TARGET_DEVICES += netgear_r7500v2
|
|
|
|
define Device/netgear_r7800
|
|
$(call Device/DniImage)
|
|
DEVICE_DTS := qcom-ipq8065-r7800
|
|
KERNEL_SIZE := 2097152
|
|
NETGEAR_BOARD_ID := R7800
|
|
NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4+cascade
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := r7800
|
|
SUPPORTED_DEVICES += r7800
|
|
DEVICE_TITLE := Netgear Nighthawk X4S R7800
|
|
DEVICE_PACKAGES := ath10k-firmware-qca9984
|
|
endef
|
|
TARGET_DEVICES += netgear_r7800
|
|
|
|
define Device/qcom_ipq8064-ap148
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_DTS := qcom-ipq8064-ap148
|
|
KERNEL_INSTALL := 1
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := ap148
|
|
SUPPORTED_DEVICES += ap148
|
|
DEVICE_TITLE := Qualcomm AP148
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0
|
|
endef
|
|
TARGET_DEVICES += qcom_ipq8064-ap148
|
|
|
|
define Device/qcom_ipq8064-ap148-legacy
|
|
$(call Device/LegacyImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_DTS := qcom-ipq8064-ap148
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := ap148
|
|
SUPPORTED_DEVICES := qcom,ipq8064-ap148 ap148
|
|
DEVICE_TITLE := Qualcomm AP148 (legacy)
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0
|
|
endef
|
|
TARGET_DEVICES += qcom_ipq8064-ap148-legacy
|
|
|
|
define Device/qcom_ipq8064-db149
|
|
$(call Device/FitImage)
|
|
DEVICE_DTS := qcom-ipq8064-db149
|
|
KERNEL_INSTALL := 1
|
|
BOARD_NAME := db149
|
|
DEVICE_TITLE := Qualcomm DB149
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0
|
|
endef
|
|
TARGET_DEVICES += qcom_ipq8064-db149
|
|
|
|
define Device/tplink_c2600
|
|
$(call Device/TpSafeImage)
|
|
DEVICE_DTS := qcom-ipq8064-c2600
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := c2600
|
|
SUPPORTED_DEVICES += c2600
|
|
TPLINK_BOARD_ID := C2600
|
|
DEVICE_TITLE := TP-Link Archer C2600
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0
|
|
endef
|
|
TARGET_DEVICES += tplink_c2600
|
|
|
|
define Device/tplink_vr2600v
|
|
KERNEL_SUFFIX := -uImage
|
|
KERNEL = kernel-bin | append-dtb | uImage none
|
|
KERNEL_NAME := zImage
|
|
KERNEL_SIZE := 2097152
|
|
DEVICE_DTS := qcom-ipq8064-vr2600v
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := vr2600v
|
|
SUPPORTED_DEVICES += vr2600v
|
|
DEVICE_TITLE := TP-Link Archer VR2600v
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
|
|
endef
|
|
TARGET_DEVICES += tplink_vr2600v
|
|
|
|
define Device/zyxel_nbg6817
|
|
DEVICE_DTS := qcom-ipq8065-nbg6817
|
|
KERNEL_SIZE := 4096k
|
|
BLOCKSIZE := 64k
|
|
BOARD_NAME := nbg6817
|
|
SUPPORTED_DEVICES += nbg6817
|
|
DEVICE_TITLE := ZyXEL NBG6817
|
|
DEVICE_PACKAGES := ath10k-firmware-qca9984 e2fsprogs kmod-fs-ext4 losetup
|
|
$(call Device/ZyXELImage)
|
|
endef
|
|
TARGET_DEVICES += zyxel_nbg6817
|
|
|
|
$(eval $(call BuildImage))
|