mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-20 11:39:02 +00:00
db91418766
TP-Link RE350K v1 (FCC ID: TE7RE350K) is a wall-plug AC1200 Wi-Fi range extender with 'Kasa Smart' support. Device is based on Qualcomm/Atheros QCA9558 + QCA9882 + AR8035 platform and is available only on US market. Specification: - 720/600/200 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of flash (SPI NOR) - 1x 1 Gbps Ethernet (AR8035) - 2T2R 2.4 GHz (QCA9558), with ext. PA (SE2565T) and LNA (SKY65971-11) - 2T2R 5 GHz (QCA9882), with ext. PA (SE5003L1-R) and LNA (SKY65981-11) - 2x U.FL connector on PCB - 2x dual-band PCB antennas - 1x LED, 2x dual-color LED (all driven by GPIO) - 3x button (app config, led, reset) - 1x mechanical on/off slide switch - 1x UART (4-pin, 2.54 mm pitch) header on PCB - 1x JTAG (8-pin, 1.27 mm pitch) header on PCB Flash instruction: Use 'factory' image directly in vendor GUI (default IP: 192.168.0.254, default credentials: admin/admin). Warning: This device does not include any kind of recovery mechanism in U-Boot. Vendor firmware access: You can access vendor firmware over serial (RX line requires jumper resistor in R306 place, near XTAL) with: root/sohoadmin credentials. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
268 lines
8.5 KiB
Makefile
268 lines
8.5 KiB
Makefile
include ./common-tp-link.mk
|
|
|
|
define Device/tplink_archer-a7-v5
|
|
$(Device/tplink-safeloader-uimage)
|
|
ATH_SOC := qca9563
|
|
IMAGE_SIZE := 15104k
|
|
DEVICE_TITLE := TP-Link Archer A7 v5
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
TPLINK_BOARD_ID := ARCHER-A7-V5
|
|
BOARDNAME := ARCHER-A7-V5
|
|
SUPPORTED_DEVICES += archer-a7-v5
|
|
endef
|
|
TARGET_DEVICES += tplink_archer-a7-v5
|
|
|
|
define Device/tplink_archer-c2-v3
|
|
$(Device/tplink-safeloader-uimage)
|
|
ATH_SOC := qca9563
|
|
IMAGE_SIZE := 7808k
|
|
DEVICE_TITLE := TP-Link Archer C2 v3
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct
|
|
TPLINK_BOARD_ID := ARCHER-C2-V3
|
|
endef
|
|
TARGET_DEVICES += tplink_archer-c2-v3
|
|
|
|
define Device/tplink_archer-c58-v1
|
|
$(Device/tplink-safeloader-uimage)
|
|
ATH_SOC := qca9561
|
|
IMAGE_SIZE := 7936k
|
|
DEVICE_TITLE := TP-Link Archer C58 v1
|
|
TPLINK_BOARD_ID := ARCHER-C58-V1
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
|
|
SUPPORTED_DEVICES += archer-c58-v1
|
|
endef
|
|
TARGET_DEVICES += tplink_archer-c58-v1
|
|
|
|
define Device/tplink_archer-c59-v1
|
|
$(Device/tplink-safeloader-uimage)
|
|
ATH_SOC := qca9561
|
|
IMAGE_SIZE := 14528k
|
|
DEVICE_TITLE := TP-Link Archer C59 v1
|
|
TPLINK_BOARD_ID := ARCHER-C59-V1
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca9888-ct
|
|
SUPPORTED_DEVICES += archer-c59-v1
|
|
endef
|
|
TARGET_DEVICES += tplink_archer-c59-v1
|
|
|
|
define Device/tplink_archer-c6-v2
|
|
$(Device/tplink-safeloader-uimage)
|
|
ATH_SOC := qca9563
|
|
IMAGE_SIZE := 7808k
|
|
DEVICE_TITLE := TP-Link Archer C6 v2
|
|
TPLINK_BOARD_ID := ARCHER-C6-V2
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
|
|
endef
|
|
TARGET_DEVICES += tplink_archer-c6-v2
|
|
|
|
define Device/tplink_archer-c5-v1
|
|
$(Device/tplink-16mlzma)
|
|
ATH_SOC := qca9558
|
|
DEVICE_TITLE := TP-Link Archer C5 v1
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
TPLINK_HWID := 0xc5000001
|
|
SUPPORTED_DEVICES += archer-c5
|
|
endef
|
|
TARGET_DEVICES += tplink_archer-c5-v1
|
|
|
|
define Device/tplink_archer-c7-v1
|
|
$(Device/tplink-8mlzma)
|
|
ATH_SOC := qca9558
|
|
DEVICE_TITLE := TP-Link Archer C7 v1
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
TPLINK_HWID := 0x75000001
|
|
endef
|
|
TARGET_DEVICES += tplink_archer-c7-v1
|
|
|
|
define Device/tplink_archer-c7-v2
|
|
$(Device/tplink-16mlzma)
|
|
ATH_SOC := qca9558
|
|
DEVICE_TITLE := TP-Link Archer C7 v2
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
TPLINK_HWID := 0xc7000002
|
|
IMAGES += factory-us.bin factory-eu.bin
|
|
IMAGE/factory-us.bin := append-rootfs | mktplinkfw factory -C US
|
|
IMAGE/factory-eu.bin := append-rootfs | mktplinkfw factory -C EU
|
|
endef
|
|
TARGET_DEVICES += tplink_archer-c7-v2
|
|
|
|
define Device/tplink_archer-c7-v4
|
|
$(Device/tplink-safeloader-uimage)
|
|
ATH_SOC := qca9563
|
|
IMAGE_SIZE := 15104k
|
|
DEVICE_TITLE := TP-Link Archer C7 v4
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
TPLINK_BOARD_ID := ARCHER-C7-V4
|
|
BOARDNAME := ARCHER-C7-V4
|
|
SUPPORTED_DEVICES += archer-c7-v4
|
|
endef
|
|
TARGET_DEVICES += tplink_archer-c7-v4
|
|
|
|
define Device/tplink_archer-c7-v5
|
|
$(Device/tplink-safeloader-uimage)
|
|
ATH_SOC := qca9563
|
|
IMAGE_SIZE := 15360k
|
|
DEVICE_TITLE := TP-Link Archer C7 v5
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
TPLINK_BOARD_ID := ARCHER-C7-V5
|
|
BOARDNAME := ARCHER-C7-V5
|
|
SUPPORTED_DEVICES += archer-c7-v5
|
|
endef
|
|
TARGET_DEVICES += tplink_archer-c7-v5
|
|
|
|
define Device/tplink_re350k-v1
|
|
$(Device/tplink)
|
|
ATH_SOC := qca9558
|
|
IMAGE_SIZE := 13760k
|
|
DEVICE_TITLE := TP-Link RE350K v1
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
TPLINK_BOARD_ID := RE350K-V1
|
|
TPLINK_HWID := 0x0
|
|
TPLINK_HWREV := 0
|
|
KERNEL := kernel-bin | append-dtb | lzma | tplink-v1-header -O
|
|
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | \
|
|
check-size $$$$(IMAGE_SIZE) | append-metadata
|
|
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
|
|
endef
|
|
TARGET_DEVICES += tplink_re350k-v1
|
|
|
|
define Device/tplink_re450-v2
|
|
$(Device/tplink)
|
|
ATH_SOC := qca9563
|
|
IMAGE_SIZE := 6016k
|
|
DEVICE_TITLE := TP-Link RE450 v2
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
TPLINK_HWID := 0x0
|
|
TPLINK_HWREV := 0
|
|
TPLINK_BOARD_ID := RE450-V2
|
|
LOADER_TYPE := elf
|
|
KERNEL := kernel-bin | append-dtb | lzma | tplink-v1-header -O
|
|
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | \
|
|
append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
|
|
endef
|
|
TARGET_DEVICES += tplink_re450-v2
|
|
|
|
define Device/tplink_tl-wdr3600
|
|
$(Device/tplink-8mlzma)
|
|
ATH_SOC := ar9344
|
|
DEVICE_TITLE := TP-Link TL-WDR3600
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
|
|
TPLINK_HWID := 0x36000001
|
|
SUPPORTED_DEVICES += tl-wdr4300
|
|
endef
|
|
TARGET_DEVICES += tplink_tl-wdr3600
|
|
|
|
define Device/tplink_tl-wdr4300
|
|
$(Device/tplink-8mlzma)
|
|
ATH_SOC := ar9344
|
|
DEVICE_TITLE := TP-Link TL-WDR4300
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
|
|
TPLINK_HWID := 0x43000001
|
|
SUPPORTED_DEVICES += tl-wdr4300
|
|
endef
|
|
TARGET_DEVICES += tplink_tl-wdr4300
|
|
|
|
define Device/tplink_tl-wdr4900-v2
|
|
$(Device/tplink-8mlzma)
|
|
ATH_SOC := qca9558
|
|
DEVICE_TITLE := TP-Link TL-WDR4900 v2
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
|
|
TPLINK_HWID := 0x49000002
|
|
endef
|
|
TARGET_DEVICES += tplink_tl-wdr4900-v2
|
|
|
|
define Device/tplink_tl-wr1043nd-v1
|
|
$(Device/tplink-8m)
|
|
ATH_SOC := ar9132
|
|
DEVICE_TITLE := TP-Link TL-WR1043N/ND v1
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
|
|
TPLINK_HWID := 0x10430001
|
|
SUPPORTED_DEVICES += tl-wr1043nd
|
|
endef
|
|
TARGET_DEVICES += tplink_tl-wr1043nd-v1
|
|
|
|
define Device/tplink_tl-wr810n-v1
|
|
$(Device/tplink-8mlzma)
|
|
ATH_SOC := qca9531
|
|
DEVICE_TITLE := TP-Link TL-WR810N v1
|
|
TPLINK_HWID := 0x8100001
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += tplink_tl-wr810n-v1
|
|
|
|
define Device/tplink_tl-wr810n-v2
|
|
$(Device/tplink-8mlzma)
|
|
ATH_SOC := qca9533
|
|
DEVICE_TITLE := TP-Link TL-WR810N v2
|
|
TPLINK_HWID := 0x8100002
|
|
endef
|
|
TARGET_DEVICES += tplink_tl-wr810n-v2
|
|
|
|
define Device/tplink_tl-wr842n-v1
|
|
$(Device/tplink-8m)
|
|
ATH_SOC := ar7241
|
|
DEVICE_TITLE := TP-Link TL-WR842N/ND v1
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
|
|
TPLINK_HWID := 0x8420001
|
|
endef
|
|
TARGET_DEVICES += tplink_tl-wr842n-v1
|
|
|
|
define Device/tplink_tl-wr842n-v2
|
|
$(Device/tplink-8mlzma)
|
|
ATH_SOC := ar9341
|
|
DEVICE_TITLE := TP-Link TL-WR842N/ND v2
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
|
|
TPLINK_HWID := 0x8420002
|
|
SUPPORTED_DEVICES += tl-wr842n-v2
|
|
endef
|
|
TARGET_DEVICES += tplink_tl-wr842n-v2
|
|
|
|
define Device/tplink_tl-wr1043nd-v2
|
|
$(Device/tplink-8mlzma)
|
|
ATH_SOC := qca9558
|
|
DEVICE_TITLE := TP-Link TL-WR1043N/ND v2
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
|
|
TPLINK_HWID := 0x10430002
|
|
SUPPORTED_DEVICES += tl-wr1043nd-v2
|
|
endef
|
|
TARGET_DEVICES += tplink_tl-wr1043nd-v2
|
|
|
|
define Device/tplink_tl-wr1043nd-v3
|
|
$(Device/tplink-8mlzma)
|
|
ATH_SOC := qca9558
|
|
DEVICE_TITLE := TP-Link TL-WR1043N/ND v3
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
|
|
TPLINK_HWID := 0x10430003
|
|
SUPPORTED_DEVICES += tl-wr1043nd-v3
|
|
endef
|
|
TARGET_DEVICES += tplink_tl-wr1043nd-v3
|
|
|
|
define Device/tplink_tl-wr1043nd-v4
|
|
$(Device/tplink)
|
|
ATH_SOC := qca9563
|
|
IMAGE_SIZE := 15552k
|
|
DEVICE_TITLE := TP-Link TL-WR1043N/ND v4
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
|
|
TPLINK_HWID := 0x10430004
|
|
TPLINK_BOARD_ID := TLWR1043NDV4
|
|
KERNEL := kernel-bin | append-dtb | lzma | tplink-v1-header -O
|
|
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | \
|
|
append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
|
|
SUPPORTED_DEVICES += tl-wr1043nd-v4
|
|
endef
|
|
TARGET_DEVICES += tplink_tl-wr1043nd-v4
|
|
|
|
define Device/tplink_tl-wr2543-v1
|
|
$(Device/tplink-8mlzma)
|
|
ATH_SOC := ar7242
|
|
DEVICE_TITLE := TP-Link TL-WR2543N/ND v1
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
|
|
TPLINK_HWID := 0x25430001
|
|
IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade -v 3.13.99 | \
|
|
append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/factory.bin := append-rootfs | mktplinkfw factory -v 3.13.99
|
|
SUPPORTED_DEVICES += tl-wr2543-v1
|
|
endef
|
|
TARGET_DEVICES += tplink_tl-wr2543-v1
|