mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-31 16:35:44 +00:00
8daeba6d47
During a reset the gpiolib warns about using the reset gpio without explicit requesting it before: [ 147.930000] ------------[ cut here ]------------ [ 147.930000] WARNING: at drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x68/0xcc() [ 147.930000] autorequest GPIO-5 [ 147.930000] Modules linked in: ath5k ath mac80211 ipv6 cfg80211 compat arc4 crypto_blkcipher aead gpio_button_hotplug [ 147.930000] Call Trace: [ 147.930000] [<8004e3bc>] dump_stack+0x8/0x34 [ 147.930000] [<80058430>] warn_slowpath_common+0x78/0xa4 [ 147.930000] [<800584e4>] warn_slowpath_fmt+0x2c/0x38 [ 147.930000] [<80166f18>] gpio_ensure_requested+0x68/0xcc [ 147.930000] [<80167264>] gpio_direction_output+0xdc/0x168 [ 147.930000] [<8004aba8>] ar2315_restart+0x28/0x54 [ 147.930000] [<80069778>] sys_reboot+0x178/0x1c0 [ 147.930000] [<80043670>] stack_done+0x20/0x40 [ 147.930000] [ 147.930000] ---[ end trace 2c7a53d8549562d6 ]--- This is fixed with this patch by using another gpiolib api call which includes the missing request. Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38183
This is the buildsystem for the OpenWrt Linux distribution. Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, bzip2, flex, python, perl make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers. Run "./scripts/feeds update -a" to get all the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install -a" to install symlinks of all of them into package/feeds/. Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use "scripts/flashing/flash.sh" for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type "make -C docs/" to build it. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your OpenWrt Project http://openwrt.org