mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 15:02:32 +00:00
27f23bac8f
Fix some section mismatches found with kernel 4.9. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
344 lines
8.6 KiB
C
344 lines
8.6 KiB
C
/*
|
|
* MikroTik RouterBOARD 91X support
|
|
*
|
|
* Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) "rb91x: " fmt
|
|
|
|
#include <linux/phy.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/ath9k_platform.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/74x164.h>
|
|
#include <linux/spi/flash.h>
|
|
#include <linux/routerboot.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/platform_data/gpio-latch.h>
|
|
#include <linux/platform_data/rb91x_nand.h>
|
|
#include <linux/platform_data/phy-at803x.h>
|
|
|
|
#include <asm/prom.h>
|
|
#include <asm/mach-ath79/ath79.h>
|
|
#include <asm/mach-ath79/ath79_spi_platform.h>
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
|
|
#include "common.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-nfc.h"
|
|
#include "dev-usb.h"
|
|
#include "dev-spi.h"
|
|
#include "dev-wmac.h"
|
|
#include "machtypes.h"
|
|
#include "pci.h"
|
|
#include "routerboot.h"
|
|
|
|
#define RB_ROUTERBOOT_OFFSET 0x0000
|
|
#define RB_ROUTERBOOT_MIN_SIZE 0xb000
|
|
#define RB_HARD_CFG_SIZE 0x1000
|
|
#define RB_BIOS_OFFSET 0xd000
|
|
#define RB_BIOS_SIZE 0x1000
|
|
#define RB_SOFT_CFG_OFFSET 0xf000
|
|
#define RB_SOFT_CFG_SIZE 0x1000
|
|
|
|
#define RB91X_FLAG_USB BIT(0)
|
|
#define RB91X_FLAG_PCIE BIT(1)
|
|
|
|
#define RB91X_LATCH_GPIO_BASE AR934X_GPIO_COUNT
|
|
#define RB91X_LATCH_GPIO(_x) (RB91X_LATCH_GPIO_BASE + (_x))
|
|
|
|
#define RB91X_SSR_GPIO_BASE (RB91X_LATCH_GPIO_BASE + AR934X_GPIO_COUNT)
|
|
#define RB91X_SSR_GPIO(_x) (RB91X_SSR_GPIO_BASE + (_x))
|
|
|
|
#define RB91X_SSR_BIT_LED1 0
|
|
#define RB91X_SSR_BIT_LED2 1
|
|
#define RB91X_SSR_BIT_LED3 2
|
|
#define RB91X_SSR_BIT_LED4 3
|
|
#define RB91X_SSR_BIT_LED5 4
|
|
#define RB91X_SSR_BIT_5 5
|
|
#define RB91X_SSR_BIT_USB_POWER 6
|
|
#define RB91X_SSR_BIT_PCIE_POWER 7
|
|
|
|
#define RB91X_GPIO_SSR_STROBE RB91X_LATCH_GPIO(0)
|
|
#define RB91X_GPIO_LED_POWER RB91X_LATCH_GPIO(1)
|
|
#define RB91X_GPIO_LED_USER RB91X_LATCH_GPIO(2)
|
|
#define RB91X_GPIO_NAND_READ RB91X_LATCH_GPIO(3)
|
|
#define RB91X_GPIO_NAND_RDY RB91X_LATCH_GPIO(4)
|
|
#define RB91X_GPIO_NLE RB91X_LATCH_GPIO(11)
|
|
#define RB91X_GPIO_NAND_NRW RB91X_LATCH_GPIO(12)
|
|
#define RB91X_GPIO_NAND_NCE RB91X_LATCH_GPIO(13)
|
|
#define RB91X_GPIO_NAND_CLE RB91X_LATCH_GPIO(14)
|
|
#define RB91X_GPIO_NAND_ALE RB91X_LATCH_GPIO(15)
|
|
|
|
#define RB91X_GPIO_LED_1 RB91X_SSR_GPIO(RB91X_SSR_BIT_LED1)
|
|
#define RB91X_GPIO_LED_2 RB91X_SSR_GPIO(RB91X_SSR_BIT_LED2)
|
|
#define RB91X_GPIO_LED_3 RB91X_SSR_GPIO(RB91X_SSR_BIT_LED3)
|
|
#define RB91X_GPIO_LED_4 RB91X_SSR_GPIO(RB91X_SSR_BIT_LED4)
|
|
#define RB91X_GPIO_LED_5 RB91X_SSR_GPIO(RB91X_SSR_BIT_LED5)
|
|
#define RB91X_GPIO_USB_POWER RB91X_SSR_GPIO(RB91X_SSR_BIT_USB_POWER)
|
|
#define RB91X_GPIO_PCIE_POWER RB91X_SSR_GPIO(RB91X_SSR_BIT_PCIE_POWER)
|
|
|
|
struct rb_board_info {
|
|
const char *name;
|
|
u32 flags;
|
|
};
|
|
|
|
static struct mtd_partition rb711gr100_spi_partitions[] = {
|
|
{
|
|
.name = "routerboot",
|
|
.offset = RB_ROUTERBOOT_OFFSET,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
}, {
|
|
.name = "hard_config",
|
|
.size = RB_HARD_CFG_SIZE,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
}, {
|
|
.name = "bios",
|
|
.offset = RB_BIOS_OFFSET,
|
|
.size = RB_BIOS_SIZE,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
}, {
|
|
.name = "soft_config",
|
|
.size = RB_SOFT_CFG_SIZE,
|
|
}
|
|
};
|
|
|
|
static struct flash_platform_data rb711gr100_spi_flash_data = {
|
|
.parts = rb711gr100_spi_partitions,
|
|
.nr_parts = ARRAY_SIZE(rb711gr100_spi_partitions),
|
|
};
|
|
|
|
static int rb711gr100_gpio_latch_gpios[AR934X_GPIO_COUNT] __initdata = {
|
|
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11,
|
|
12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22
|
|
};
|
|
|
|
static struct gpio_latch_platform_data rb711gr100_gpio_latch_data __initdata = {
|
|
.base = RB91X_LATCH_GPIO_BASE,
|
|
.num_gpios = ARRAY_SIZE(rb711gr100_gpio_latch_gpios),
|
|
.gpios = rb711gr100_gpio_latch_gpios,
|
|
.le_gpio_index = 11,
|
|
.le_active_low = true,
|
|
};
|
|
|
|
static struct rb91x_nand_platform_data rb711gr100_nand_data __initdata = {
|
|
.gpio_nce = RB91X_GPIO_NAND_NCE,
|
|
.gpio_ale = RB91X_GPIO_NAND_ALE,
|
|
.gpio_cle = RB91X_GPIO_NAND_CLE,
|
|
.gpio_rdy = RB91X_GPIO_NAND_RDY,
|
|
.gpio_read = RB91X_GPIO_NAND_READ,
|
|
.gpio_nrw = RB91X_GPIO_NAND_NRW,
|
|
.gpio_nle = RB91X_GPIO_NLE,
|
|
};
|
|
|
|
static u8 rb711gr100_ssr_initdata[] = {
|
|
BIT(RB91X_SSR_BIT_PCIE_POWER) |
|
|
BIT(RB91X_SSR_BIT_USB_POWER) |
|
|
BIT(RB91X_SSR_BIT_5)
|
|
};
|
|
|
|
static struct gen_74x164_chip_platform_data rb711gr100_ssr_data = {
|
|
.base = RB91X_SSR_GPIO_BASE,
|
|
.num_registers = ARRAY_SIZE(rb711gr100_ssr_initdata),
|
|
.init_data = rb711gr100_ssr_initdata,
|
|
};
|
|
|
|
static struct spi_board_info rb711gr100_spi_info[] = {
|
|
{
|
|
.bus_num = 0,
|
|
.chip_select = 0,
|
|
.max_speed_hz = 25000000,
|
|
.modalias = "m25p80",
|
|
.platform_data = &rb711gr100_spi_flash_data,
|
|
}, {
|
|
.bus_num = 0,
|
|
.chip_select = 1,
|
|
.max_speed_hz = 10000000,
|
|
.modalias = "74x164",
|
|
.platform_data = &rb711gr100_ssr_data,
|
|
}
|
|
};
|
|
|
|
static int rb711gr100_spi_cs_gpios[2] = {
|
|
-ENOENT,
|
|
RB91X_GPIO_SSR_STROBE,
|
|
};
|
|
|
|
static struct ath79_spi_platform_data rb711gr100_spi_data __initdata = {
|
|
.bus_num = 0,
|
|
.num_chipselect = 2,
|
|
.cs_gpios = rb711gr100_spi_cs_gpios,
|
|
};
|
|
|
|
static struct gpio_led rb711gr100_leds[] __initdata = {
|
|
{
|
|
.name = "rb:green:led1",
|
|
.gpio = RB91X_GPIO_LED_1,
|
|
.active_low = 0,
|
|
},
|
|
{
|
|
.name = "rb:green:led2",
|
|
.gpio = RB91X_GPIO_LED_2,
|
|
.active_low = 0,
|
|
},
|
|
{
|
|
.name = "rb:green:led3",
|
|
.gpio = RB91X_GPIO_LED_3,
|
|
.active_low = 0,
|
|
},
|
|
{
|
|
.name = "rb:green:led4",
|
|
.gpio = RB91X_GPIO_LED_4,
|
|
.active_low = 0,
|
|
},
|
|
{
|
|
.name = "rb:green:led5",
|
|
.gpio = RB91X_GPIO_LED_5,
|
|
.active_low = 0,
|
|
},
|
|
{
|
|
.name = "rb:green:user",
|
|
.gpio = RB91X_GPIO_LED_USER,
|
|
.active_low = 0,
|
|
},
|
|
{
|
|
.name = "rb:green:power",
|
|
.gpio = RB91X_GPIO_LED_POWER,
|
|
.active_low = 0,
|
|
.default_state = LEDS_GPIO_DEFSTATE_KEEP,
|
|
},
|
|
};
|
|
|
|
static struct at803x_platform_data rb91x_at803x_data = {
|
|
.disable_smarteee = 1,
|
|
.enable_rgmii_rx_delay = 1,
|
|
.enable_rgmii_tx_delay = 1,
|
|
};
|
|
|
|
static struct mdio_board_info rb91x_mdio0_info[] = {
|
|
{
|
|
.bus_id = "ag71xx-mdio.0",
|
|
.phy_addr = 0,
|
|
.platform_data = &rb91x_at803x_data,
|
|
},
|
|
};
|
|
|
|
static void __init rb711gr100_init_partitions(const struct rb_info *info)
|
|
{
|
|
rb711gr100_spi_partitions[0].size = info->hard_cfg_offs;
|
|
rb711gr100_spi_partitions[1].offset = info->hard_cfg_offs;
|
|
|
|
rb711gr100_spi_partitions[3].offset = info->soft_cfg_offs;
|
|
}
|
|
|
|
void __init rb711gr100_wlan_init(void)
|
|
{
|
|
char *caldata;
|
|
u8 wlan_mac[ETH_ALEN];
|
|
|
|
caldata = rb_get_wlan_data();
|
|
if (caldata == NULL)
|
|
return;
|
|
|
|
ath79_init_mac(wlan_mac, ath79_mac_base, 1);
|
|
ath79_register_wmac(caldata + 0x1000, wlan_mac);
|
|
|
|
kfree(caldata);
|
|
}
|
|
|
|
#define RB_BOARD_INFO(_name, _flags) \
|
|
{ \
|
|
.name = (_name), \
|
|
.flags = (_flags), \
|
|
}
|
|
|
|
static const struct rb_board_info rb711gr100_boards[] __initconst = {
|
|
RB_BOARD_INFO("911G-2HPnD", 0),
|
|
RB_BOARD_INFO("911G-5HPnD", 0),
|
|
RB_BOARD_INFO("912UAG-2HPnD", RB91X_FLAG_USB | RB91X_FLAG_PCIE),
|
|
RB_BOARD_INFO("912UAG-5HPnD", RB91X_FLAG_USB | RB91X_FLAG_PCIE),
|
|
};
|
|
|
|
static u32 rb711gr100_get_flags(const struct rb_info *info)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(rb711gr100_boards); i++) {
|
|
const struct rb_board_info *bi;
|
|
|
|
bi = &rb711gr100_boards[i];
|
|
if (strcmp(info->board_name, bi->name) == 0)
|
|
return bi->flags;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __init rb711gr100_setup(void)
|
|
{
|
|
const struct rb_info *info;
|
|
char buf[64];
|
|
u32 flags;
|
|
|
|
info = rb_init_info((void *) KSEG1ADDR(0x1f000000), 0x10000);
|
|
if (!info)
|
|
return;
|
|
|
|
scnprintf(buf, sizeof(buf), "Mikrotik RouterBOARD %s",
|
|
(info->board_name) ? info->board_name : "");
|
|
mips_set_machine_name(buf);
|
|
|
|
rb711gr100_init_partitions(info);
|
|
ath79_register_spi(&rb711gr100_spi_data, rb711gr100_spi_info,
|
|
ARRAY_SIZE(rb711gr100_spi_info));
|
|
|
|
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
|
|
AR934X_ETH_CFG_RXD_DELAY |
|
|
AR934X_ETH_CFG_SW_ONLY_MODE);
|
|
|
|
ath79_register_mdio(0, 0x0);
|
|
|
|
mdiobus_register_board_info(rb91x_mdio0_info,
|
|
ARRAY_SIZE(rb91x_mdio0_info));
|
|
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
|
ath79_eth0_data.phy_mask = BIT(0);
|
|
ath79_eth0_pll_data.pll_1000 = 0x02000000;
|
|
|
|
ath79_register_eth(0);
|
|
|
|
rb711gr100_wlan_init();
|
|
|
|
platform_device_register_data(NULL, "rb91x-nand", -1,
|
|
&rb711gr100_nand_data,
|
|
sizeof(rb711gr100_nand_data));
|
|
|
|
platform_device_register_data(NULL, "gpio-latch", -1,
|
|
&rb711gr100_gpio_latch_data,
|
|
sizeof(rb711gr100_gpio_latch_data));
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(rb711gr100_leds),
|
|
rb711gr100_leds);
|
|
|
|
flags = rb711gr100_get_flags(info);
|
|
|
|
if (flags & RB91X_FLAG_USB)
|
|
ath79_register_usb();
|
|
|
|
if (flags & RB91X_FLAG_PCIE)
|
|
ath79_register_pci();
|
|
|
|
}
|
|
|
|
MIPS_MACHINE_NONAME(ATH79_MACH_RB_711GR100, "711Gr100", rb711gr100_setup);
|