mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 07:22:33 +00:00
ed224b1880
This adds support for kernel 4.14 to the target and directly make it the default kernel version to use. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Sandeep Sheriker <sandeepsheriker.mallikarjun@microchip.com>
435 lines
9.1 KiB
Diff
435 lines
9.1 KiB
Diff
--- a/arch/arm/boot/dts/Makefile
|
|
+++ b/arch/arm/boot/dts/Makefile
|
|
@@ -50,6 +50,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
|
|
wb45n.dtb
|
|
dtb-$(CONFIG_SOC_SAM_V7) += \
|
|
at91-kizbox2.dtb \
|
|
+ at91-sama5d2_ptc_ek.dtb \
|
|
at91-sama5d27_som1_ek.dtb \
|
|
at91-sama5d2_xplained.dtb \
|
|
at91-sama5d3_xplained.dtb \
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
|
|
@@ -0,0 +1,421 @@
|
|
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
|
|
+/*
|
|
+ * at91-sama5d2_ptc_ek.dts - Device Tree file for SAMA5D2 PTC EK board
|
|
+ *
|
|
+ * Copyright (C) 2017 Microchip/Atmel,
|
|
+ * 2017 Wenyou Yang <wenyou.yang@microchip.com>
|
|
+ * 2017 Ludovic Desroches <ludovic.desroches@microchip.com>
|
|
+ */
|
|
+/dts-v1/;
|
|
+#include "sama5d2.dtsi"
|
|
+#include "sama5d2-pinfunc.h"
|
|
+#include <dt-bindings/mfd/atmel-flexcom.h>
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
+#include <dt-bindings/pinctrl/at91.h>
|
|
+
|
|
+/ {
|
|
+ model = "Atmel SAMA5D2 PTC EK";
|
|
+ compatible = "atmel,sama5d2-ptc_ek", "atmel,sama5d2", "atmel,sama5";
|
|
+
|
|
+ aliases {
|
|
+ serial0 = &uart0;
|
|
+ i2c0 = &i2c0;
|
|
+ i2c1 = &i2c1;
|
|
+ i2c2 = &i2c2;
|
|
+ };
|
|
+
|
|
+ chosen {
|
|
+ stdout-path = "serial0:115200n8";
|
|
+ };
|
|
+
|
|
+ memory {
|
|
+ reg = <0x20000000 0x80000>;
|
|
+ };
|
|
+
|
|
+ clocks {
|
|
+ slow_xtal {
|
|
+ clock-frequency = <32768>;
|
|
+ };
|
|
+
|
|
+ main_xtal {
|
|
+ clock-frequency = <24000000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ ahb {
|
|
+ usb0: gadget@00300000 {
|
|
+ atmel,vbus-gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pinctrl_usba_vbus>;
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ usb1: ohci@00400000 {
|
|
+ num-ports = <3>;
|
|
+ atmel,vbus-gpio = <0
|
|
+ &pioA PIN_PB12 GPIO_ACTIVE_HIGH
|
|
+ 0
|
|
+ >;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pinctrl_usb_default>;
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ usb2: ehci@00500000 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ nand0: nand@80000000 {
|
|
+ nand-bus-width = <8>;
|
|
+ nand-ecc-mode = "hw";
|
|
+ nand-on-flash-bbt;
|
|
+ atmel,has-pmecc;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pinctrl_nand_default>;
|
|
+ status = "okay"; /* conflicts with sdmmc1 and qspi0 */
|
|
+
|
|
+ at91bootstrap@0 {
|
|
+ label = "bootstrap";
|
|
+ reg = <0x0 0x40000>;
|
|
+ };
|
|
+
|
|
+ bootloader@40000 {
|
|
+ label = "bootloader";
|
|
+ reg = <0x40000 0xc0000>;
|
|
+ };
|
|
+
|
|
+ bootloaderenv@0x100000 {
|
|
+ label = "bootloader env";
|
|
+ reg = <0x100000 0x40000>;
|
|
+ };
|
|
+
|
|
+ bootloaderenvred@0x140000 {
|
|
+ label = "bootloader env redundant";
|
|
+ reg = <0x140000 0x40000>;
|
|
+ };
|
|
+
|
|
+ dtb@180000 {
|
|
+ label = "device tree";
|
|
+ reg = <0x180000 0x80000>;
|
|
+ };
|
|
+
|
|
+ kernel@200000 {
|
|
+ label = "kernel";
|
|
+ reg = <0x200000 0x600000>;
|
|
+ };
|
|
+
|
|
+ rootfs@800000 {
|
|
+ label = "rootfs";
|
|
+ reg = <0x800000 0x1f800000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ sdmmc0: sdio-host@a0000000 {
|
|
+ bus-width = <8>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pinctrl_sdmmc0_default>;
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ apb {
|
|
+ pmc: pmc@f0014000 {
|
|
+ pmc_fast_restart {
|
|
+ compatible = "atmel,sama5d2-pmc-fast-startup";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ atmel,wakeup-rtc-timer;
|
|
+
|
|
+ wkpin: input@0 {
|
|
+ reg = <0>;
|
|
+ };
|
|
+
|
|
+ gmac_wol: input@10 {
|
|
+ reg = <10>;
|
|
+ atmel,wakeup-active-high;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ spi0: spi@f8000000 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pinctrl_spi0_default>;
|
|
+ status = "okay";
|
|
+
|
|
+ /*
|
|
+ m25p80@0 {
|
|
+ compatible = "atmel,at25df321a";
|
|
+ reg = <0>;
|
|
+ spi-max-frequency = <50000000>;
|
|
+ };
|
|
+ */
|
|
+ };
|
|
+
|
|
+ macb0: ethernet@f8008000 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
|
|
+ phy-mode = "rmii";
|
|
+ status = "okay";
|
|
+
|
|
+ ethernet-phy@1 {
|
|
+ reg = <0x1>;
|
|
+ interrupt-parent = <&pioA>;
|
|
+ interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ uart0: serial@f801c000 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pinctrl_uart0_default>;
|
|
+ atmel,use-dma-rx;
|
|
+ atmel,use-dma-tx;
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ uart2: serial@f8024000 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pinctrl_uart2_default>;
|
|
+ atmel,use-dma-rx;
|
|
+ atmel,use-dma-tx;
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ i2c0: i2c@f8028000 {
|
|
+ dmas = <0>, <0>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pinctrl_i2c0_default>;
|
|
+ i2c-sda-hold-time-ns = <350>;
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ flx0: flexcom@f8034000 {
|
|
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
|
|
+ status = "okay";
|
|
+
|
|
+ i2c2: i2c@600 {
|
|
+ compatible = "atmel,sama5d2-i2c";
|
|
+ reg = <0x600 0x200>;
|
|
+ interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
|
|
+ dmas = <0>, <0>;
|
|
+ dma-names = "tx", "rx";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ clocks = <&flx0_clk>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pinctrl_flx0_default>;
|
|
+ atmel,fifo-size = <16>;
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ shdwc@f8048010 {
|
|
+ atmel,shdwc-debouncer = <976>;
|
|
+
|
|
+ input@0 {
|
|
+ reg = <0>;
|
|
+ atmel,wakeup-type = "low";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ watchdog@f8048040 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ spi1: spi@fc000000 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pinctrl_spi1_default>;
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ i2c1: i2c@fc028000 {
|
|
+ dmas = <0>, <0>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pinctrl_i2c1_default>;
|
|
+ status = "okay";
|
|
+
|
|
+ at24@50 {
|
|
+ compatible = "24c02";
|
|
+ reg = <0x50>;
|
|
+ pagesize = <8>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ pinctrl@fc038000 {
|
|
+ pinctrl_flx0_default: flx0_default {
|
|
+ pinmux = <PIN_PB28__FLEXCOM0_IO0>,
|
|
+ <PIN_PB29__FLEXCOM0_IO1>;
|
|
+ bias-disable;
|
|
+ };
|
|
+
|
|
+ pinctrl_i2c0_default: i2c0_default {
|
|
+ pinmux = <PIN_PD21__TWD0>,
|
|
+ <PIN_PD22__TWCK0>;
|
|
+ bias-disable;
|
|
+ };
|
|
+
|
|
+ pinctrl_i2c1_default: i2c1_default {
|
|
+ pinmux = <PIN_PC6__TWD1>,
|
|
+ <PIN_PC7__TWCK1>;
|
|
+ bias-disable;
|
|
+ };
|
|
+
|
|
+ pinctrl_key_gpio_default: key_gpio_default {
|
|
+ pinmux = <PIN_PA10__GPIO>;
|
|
+ bias-pull-up;
|
|
+ };
|
|
+
|
|
+ pinctrl_led_gpio_default: led_gpio_default {
|
|
+ pinmux = <PIN_PB6__GPIO>,
|
|
+ <PIN_PB8__GPIO>,
|
|
+ <PIN_PB10__GPIO>;
|
|
+ bias-pull-up;
|
|
+ };
|
|
+
|
|
+ pinctrl_macb0_default: macb0_default {
|
|
+ pinmux = <PIN_PB14__GTXCK>,
|
|
+ <PIN_PB15__GTXEN>,
|
|
+ <PIN_PB16__GRXDV>,
|
|
+ <PIN_PB17__GRXER>,
|
|
+ <PIN_PB18__GRX0>,
|
|
+ <PIN_PB19__GRX1>,
|
|
+ <PIN_PB20__GTX0>,
|
|
+ <PIN_PB21__GTX1>,
|
|
+ <PIN_PB22__GMDC>,
|
|
+ <PIN_PB23__GMDIO>;
|
|
+ bias-disable;
|
|
+ };
|
|
+
|
|
+ pinctrl_macb0_phy_irq: macb0_phy_irq {
|
|
+ pinmux = <PIN_PB24__GPIO>;
|
|
+ bias-disable;
|
|
+ };
|
|
+
|
|
+ pinctrl_nand_default: nand_default {
|
|
+ re_we_data {
|
|
+ pinmux = <PIN_PA22__D0>,
|
|
+ <PIN_PA23__D1>,
|
|
+ <PIN_PA24__D2>,
|
|
+ <PIN_PA25__D3>,
|
|
+ <PIN_PA26__D4>,
|
|
+ <PIN_PA27__D5>,
|
|
+ <PIN_PA28__D6>,
|
|
+ <PIN_PA29__D7>,
|
|
+ <PIN_PA30__NWE_NANDWE>,
|
|
+ <PIN_PB2__NRD_NANDOE>;
|
|
+ bias-pull-up;
|
|
+ };
|
|
+
|
|
+ ale_cle_rdy_cs {
|
|
+ pinmux = <PIN_PB0__A21_NANDALE>,
|
|
+ <PIN_PB1__A22_NANDCLE>,
|
|
+ <PIN_PC8__NANDRDY>,
|
|
+ <PIN_PA31__NCS3>;
|
|
+ bias-pull-up;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ pinctrl_sdmmc0_default: sdmmc0_default {
|
|
+ cmd_data {
|
|
+ pinmux = <PIN_PA1__SDMMC0_CMD>,
|
|
+ <PIN_PA2__SDMMC0_DAT0>,
|
|
+ <PIN_PA3__SDMMC0_DAT1>,
|
|
+ <PIN_PA4__SDMMC0_DAT2>,
|
|
+ <PIN_PA5__SDMMC0_DAT3>,
|
|
+ <PIN_PA6__SDMMC0_DAT4>,
|
|
+ <PIN_PA7__SDMMC0_DAT5>,
|
|
+ <PIN_PA8__SDMMC0_DAT6>,
|
|
+ <PIN_PA9__SDMMC0_DAT7>;
|
|
+ bias-pull-up;
|
|
+ };
|
|
+
|
|
+ ck_cd_vddsel {
|
|
+ pinmux = <PIN_PA0__SDMMC0_CK>,
|
|
+ <PIN_PA11__SDMMC0_VDDSEL>,
|
|
+ <PIN_PA13__SDMMC0_CD>;
|
|
+ bias-disable;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ pinctrl_spi0_default: spi0_default {
|
|
+ pinmux = <PIN_PA14__SPI0_SPCK>,
|
|
+ <PIN_PA15__SPI0_MOSI>,
|
|
+ <PIN_PA16__SPI0_MISO>,
|
|
+ <PIN_PA17__SPI0_NPCS0>;
|
|
+ bias-disable;
|
|
+ };
|
|
+
|
|
+ pinctrl_spi1_default: spi1_default {
|
|
+ pinmux = <PIN_PC1__SPI1_SPCK>,
|
|
+ <PIN_PC2__SPI1_MOSI>,
|
|
+ <PIN_PC3__SPI1_MISO>,
|
|
+ <PIN_PC4__SPI1_NPCS0>;
|
|
+ bias-disable;
|
|
+ };
|
|
+
|
|
+ pinctrl_uart0_default: uart0_default {
|
|
+ pinmux = <PIN_PB26__URXD0>,
|
|
+ <PIN_PB27__UTXD0>;
|
|
+ bias-disable;
|
|
+ };
|
|
+
|
|
+ pinctrl_uart2_default: uart2_default {
|
|
+ pinmux = <PIN_PD23__URXD2>,
|
|
+ <PIN_PD24__UTXD2>;
|
|
+ bias-disable;
|
|
+ };
|
|
+
|
|
+ pinctrl_usb_default: usb_default {
|
|
+ pinmux = <PIN_PB12__GPIO>;
|
|
+ bias-disable;
|
|
+ };
|
|
+
|
|
+ pinctrl_usba_vbus: usba_vbus {
|
|
+ pinmux = <PIN_PB11__GPIO>;
|
|
+ bias-disable;
|
|
+ };
|
|
+
|
|
+ };
|
|
+
|
|
+ ptc@fc060000 {
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ gpio_keys {
|
|
+ compatible = "gpio-keys";
|
|
+
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pinctrl_key_gpio_default>;
|
|
+
|
|
+ bp1 {
|
|
+ label = "PB_USER";
|
|
+ gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
|
|
+ linux,code = <0x104>;
|
|
+ wakeup-source;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ leds {
|
|
+ compatible = "gpio-leds";
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pinctrl_led_gpio_default>;
|
|
+ status = "okay";
|
|
+
|
|
+ red {
|
|
+ label = "red";
|
|
+ gpios = <&pioA PIN_PB10 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+
|
|
+ green {
|
|
+ label = "green";
|
|
+ gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+
|
|
+ blue {
|
|
+ label = "blue";
|
|
+ gpios = <&pioA PIN_PB6 GPIO_ACTIVE_HIGH>;
|
|
+ linux,default-trigger = "heartbeat";
|
|
+ };
|
|
+ };
|
|
+};
|