mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 14:13:16 +00:00
d40756563c
Let's pick a bunch of useful phylink changes which allow us to keep drivers in sync with mainline Linux. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
385 lines
12 KiB
Diff
385 lines
12 KiB
Diff
From fe60e7154d3a35af975c5e6570d6ec31aab9a731 Mon Sep 17 00:00:00 2001
|
|
From: Sean Anderson <sean.anderson@seco.com>
|
|
Date: Mon, 17 Oct 2022 16:22:37 -0400
|
|
Subject: [PATCH 02/21] net: fman: memac: Use lynx pcs driver
|
|
|
|
Although not stated in the datasheet, as far as I can tell PCS for mEMACs
|
|
is a "Lynx." By reusing the existing driver, we can remove the PCS
|
|
management code from the memac driver. This requires calling some PCS
|
|
functions manually which phylink would usually do for us, but we will let
|
|
it do that soon.
|
|
|
|
One problem is that we don't actually have a PCS for QSGMII. We pretend
|
|
that each mEMAC's MDIO bus has four QSGMII PCSs, but this is not the case.
|
|
Only the "base" mEMAC's MDIO bus has the four QSGMII PCSs. This is not an
|
|
issue yet, because we never get the PCS state. However, it will be once the
|
|
conversion to phylink is complete, since the links will appear to never
|
|
come up. To get around this, we allow specifying multiple PCSs in pcsphy.
|
|
This breaks backwards compatibility with old device trees, but only for
|
|
QSGMII. IMO this is the only reasonable way to figure out what the actual
|
|
QSGMII PCS is.
|
|
|
|
Additionally, we now also support a separate XFI PCS. This can allow the
|
|
SerDes driver to set different addresses for the SGMII and XFI PCSs so they
|
|
can be accessed at the same time.
|
|
|
|
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
---
|
|
drivers/net/ethernet/freescale/fman/Kconfig | 3 +
|
|
.../net/ethernet/freescale/fman/fman_memac.c | 258 +++++++-----------
|
|
2 files changed, 105 insertions(+), 156 deletions(-)
|
|
|
|
--- a/drivers/net/ethernet/freescale/fman/Kconfig
|
|
+++ b/drivers/net/ethernet/freescale/fman/Kconfig
|
|
@@ -4,6 +4,9 @@ config FSL_FMAN
|
|
depends on FSL_SOC || ARCH_LAYERSCAPE || COMPILE_TEST
|
|
select GENERIC_ALLOCATOR
|
|
select PHYLIB
|
|
+ select PHYLINK
|
|
+ select PCS
|
|
+ select PCS_LYNX
|
|
select CRC32
|
|
default n
|
|
help
|
|
--- a/drivers/net/ethernet/freescale/fman/fman_memac.c
|
|
+++ b/drivers/net/ethernet/freescale/fman/fman_memac.c
|
|
@@ -11,43 +11,12 @@
|
|
|
|
#include <linux/slab.h>
|
|
#include <linux/io.h>
|
|
+#include <linux/pcs-lynx.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/phy_fixed.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/of_mdio.h>
|
|
|
|
-/* PCS registers */
|
|
-#define MDIO_SGMII_CR 0x00
|
|
-#define MDIO_SGMII_DEV_ABIL_SGMII 0x04
|
|
-#define MDIO_SGMII_LINK_TMR_L 0x12
|
|
-#define MDIO_SGMII_LINK_TMR_H 0x13
|
|
-#define MDIO_SGMII_IF_MODE 0x14
|
|
-
|
|
-/* SGMII Control defines */
|
|
-#define SGMII_CR_AN_EN 0x1000
|
|
-#define SGMII_CR_RESTART_AN 0x0200
|
|
-#define SGMII_CR_FD 0x0100
|
|
-#define SGMII_CR_SPEED_SEL1_1G 0x0040
|
|
-#define SGMII_CR_DEF_VAL (SGMII_CR_AN_EN | SGMII_CR_FD | \
|
|
- SGMII_CR_SPEED_SEL1_1G)
|
|
-
|
|
-/* SGMII Device Ability for SGMII defines */
|
|
-#define MDIO_SGMII_DEV_ABIL_SGMII_MODE 0x4001
|
|
-#define MDIO_SGMII_DEV_ABIL_BASEX_MODE 0x01A0
|
|
-
|
|
-/* Link timer define */
|
|
-#define LINK_TMR_L 0xa120
|
|
-#define LINK_TMR_H 0x0007
|
|
-#define LINK_TMR_L_BASEX 0xaf08
|
|
-#define LINK_TMR_H_BASEX 0x002f
|
|
-
|
|
-/* SGMII IF Mode defines */
|
|
-#define IF_MODE_USE_SGMII_AN 0x0002
|
|
-#define IF_MODE_SGMII_EN 0x0001
|
|
-#define IF_MODE_SGMII_SPEED_100M 0x0004
|
|
-#define IF_MODE_SGMII_SPEED_1G 0x0008
|
|
-#define IF_MODE_SGMII_DUPLEX_HALF 0x0010
|
|
-
|
|
/* Num of additional exact match MAC adr regs */
|
|
#define MEMAC_NUM_OF_PADDRS 7
|
|
|
|
@@ -326,7 +295,9 @@ struct fman_mac {
|
|
struct fman_rev_info fm_rev_info;
|
|
bool basex_if;
|
|
struct phy *serdes;
|
|
- struct phy_device *pcsphy;
|
|
+ struct phylink_pcs *sgmii_pcs;
|
|
+ struct phylink_pcs *qsgmii_pcs;
|
|
+ struct phylink_pcs *xfi_pcs;
|
|
bool allmulti_enabled;
|
|
};
|
|
|
|
@@ -487,91 +458,22 @@ static u32 get_mac_addr_hash_code(u64 et
|
|
return xor_val;
|
|
}
|
|
|
|
-static void setup_sgmii_internal_phy(struct fman_mac *memac,
|
|
- struct fixed_phy_status *fixed_link)
|
|
-{
|
|
- u16 tmp_reg16;
|
|
-
|
|
- if (WARN_ON(!memac->pcsphy))
|
|
- return;
|
|
-
|
|
- /* SGMII mode */
|
|
- tmp_reg16 = IF_MODE_SGMII_EN;
|
|
- if (!fixed_link)
|
|
- /* AN enable */
|
|
- tmp_reg16 |= IF_MODE_USE_SGMII_AN;
|
|
- else {
|
|
- switch (fixed_link->speed) {
|
|
- case 10:
|
|
- /* For 10M: IF_MODE[SPEED_10M] = 0 */
|
|
- break;
|
|
- case 100:
|
|
- tmp_reg16 |= IF_MODE_SGMII_SPEED_100M;
|
|
- break;
|
|
- case 1000:
|
|
- default:
|
|
- tmp_reg16 |= IF_MODE_SGMII_SPEED_1G;
|
|
- break;
|
|
- }
|
|
- if (!fixed_link->duplex)
|
|
- tmp_reg16 |= IF_MODE_SGMII_DUPLEX_HALF;
|
|
- }
|
|
- phy_write(memac->pcsphy, MDIO_SGMII_IF_MODE, tmp_reg16);
|
|
-
|
|
- /* Device ability according to SGMII specification */
|
|
- tmp_reg16 = MDIO_SGMII_DEV_ABIL_SGMII_MODE;
|
|
- phy_write(memac->pcsphy, MDIO_SGMII_DEV_ABIL_SGMII, tmp_reg16);
|
|
-
|
|
- /* Adjust link timer for SGMII -
|
|
- * According to Cisco SGMII specification the timer should be 1.6 ms.
|
|
- * The link_timer register is configured in units of the clock.
|
|
- * - When running as 1G SGMII, Serdes clock is 125 MHz, so
|
|
- * unit = 1 / (125*10^6 Hz) = 8 ns.
|
|
- * 1.6 ms in units of 8 ns = 1.6ms / 8ns = 2*10^5 = 0x30d40
|
|
- * - When running as 2.5G SGMII, Serdes clock is 312.5 MHz, so
|
|
- * unit = 1 / (312.5*10^6 Hz) = 3.2 ns.
|
|
- * 1.6 ms in units of 3.2 ns = 1.6ms / 3.2ns = 5*10^5 = 0x7a120.
|
|
- * Since link_timer value of 1G SGMII will be too short for 2.5 SGMII,
|
|
- * we always set up here a value of 2.5 SGMII.
|
|
- */
|
|
- phy_write(memac->pcsphy, MDIO_SGMII_LINK_TMR_H, LINK_TMR_H);
|
|
- phy_write(memac->pcsphy, MDIO_SGMII_LINK_TMR_L, LINK_TMR_L);
|
|
-
|
|
- if (!fixed_link)
|
|
- /* Restart AN */
|
|
- tmp_reg16 = SGMII_CR_DEF_VAL | SGMII_CR_RESTART_AN;
|
|
+static void setup_sgmii_internal(struct fman_mac *memac,
|
|
+ struct phylink_pcs *pcs,
|
|
+ struct fixed_phy_status *fixed_link)
|
|
+{
|
|
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
|
|
+ phy_interface_t iface = memac->basex_if ? PHY_INTERFACE_MODE_1000BASEX :
|
|
+ PHY_INTERFACE_MODE_SGMII;
|
|
+ unsigned int mode = fixed_link ? MLO_AN_FIXED : MLO_AN_INBAND;
|
|
+
|
|
+ linkmode_set_pause(advertising, true, true);
|
|
+ pcs->ops->pcs_config(pcs, mode, iface, advertising, true);
|
|
+ if (fixed_link)
|
|
+ pcs->ops->pcs_link_up(pcs, mode, iface, fixed_link->speed,
|
|
+ fixed_link->duplex);
|
|
else
|
|
- /* AN disabled */
|
|
- tmp_reg16 = SGMII_CR_DEF_VAL & ~SGMII_CR_AN_EN;
|
|
- phy_write(memac->pcsphy, 0x0, tmp_reg16);
|
|
-}
|
|
-
|
|
-static void setup_sgmii_internal_phy_base_x(struct fman_mac *memac)
|
|
-{
|
|
- u16 tmp_reg16;
|
|
-
|
|
- /* AN Device capability */
|
|
- tmp_reg16 = MDIO_SGMII_DEV_ABIL_BASEX_MODE;
|
|
- phy_write(memac->pcsphy, MDIO_SGMII_DEV_ABIL_SGMII, tmp_reg16);
|
|
-
|
|
- /* Adjust link timer for SGMII -
|
|
- * For Serdes 1000BaseX auto-negotiation the timer should be 10 ms.
|
|
- * The link_timer register is configured in units of the clock.
|
|
- * - When running as 1G SGMII, Serdes clock is 125 MHz, so
|
|
- * unit = 1 / (125*10^6 Hz) = 8 ns.
|
|
- * 10 ms in units of 8 ns = 10ms / 8ns = 1250000 = 0x1312d0
|
|
- * - When running as 2.5G SGMII, Serdes clock is 312.5 MHz, so
|
|
- * unit = 1 / (312.5*10^6 Hz) = 3.2 ns.
|
|
- * 10 ms in units of 3.2 ns = 10ms / 3.2ns = 3125000 = 0x2faf08.
|
|
- * Since link_timer value of 1G SGMII will be too short for 2.5 SGMII,
|
|
- * we always set up here a value of 2.5 SGMII.
|
|
- */
|
|
- phy_write(memac->pcsphy, MDIO_SGMII_LINK_TMR_H, LINK_TMR_H_BASEX);
|
|
- phy_write(memac->pcsphy, MDIO_SGMII_LINK_TMR_L, LINK_TMR_L_BASEX);
|
|
-
|
|
- /* Restart AN */
|
|
- tmp_reg16 = SGMII_CR_DEF_VAL | SGMII_CR_RESTART_AN;
|
|
- phy_write(memac->pcsphy, 0x0, tmp_reg16);
|
|
+ pcs->ops->pcs_an_restart(pcs);
|
|
}
|
|
|
|
static int check_init_parameters(struct fman_mac *memac)
|
|
@@ -983,7 +885,6 @@ static int memac_set_exception(struct fm
|
|
static int memac_init(struct fman_mac *memac)
|
|
{
|
|
struct memac_cfg *memac_drv_param;
|
|
- u8 i;
|
|
enet_addr_t eth_addr;
|
|
bool slow_10g_if = false;
|
|
struct fixed_phy_status *fixed_link = NULL;
|
|
@@ -1036,32 +937,10 @@ static int memac_init(struct fman_mac *m
|
|
iowrite32be(reg32, &memac->regs->command_config);
|
|
}
|
|
|
|
- if (memac->phy_if == PHY_INTERFACE_MODE_SGMII) {
|
|
- /* Configure internal SGMII PHY */
|
|
- if (memac->basex_if)
|
|
- setup_sgmii_internal_phy_base_x(memac);
|
|
- else
|
|
- setup_sgmii_internal_phy(memac, fixed_link);
|
|
- } else if (memac->phy_if == PHY_INTERFACE_MODE_QSGMII) {
|
|
- /* Configure 4 internal SGMII PHYs */
|
|
- for (i = 0; i < 4; i++) {
|
|
- u8 qsmgii_phy_addr, phy_addr;
|
|
- /* QSGMII PHY address occupies 3 upper bits of 5-bit
|
|
- * phy_address; the lower 2 bits are used to extend
|
|
- * register address space and access each one of 4
|
|
- * ports inside QSGMII.
|
|
- */
|
|
- phy_addr = memac->pcsphy->mdio.addr;
|
|
- qsmgii_phy_addr = (u8)((phy_addr << 2) | i);
|
|
- memac->pcsphy->mdio.addr = qsmgii_phy_addr;
|
|
- if (memac->basex_if)
|
|
- setup_sgmii_internal_phy_base_x(memac);
|
|
- else
|
|
- setup_sgmii_internal_phy(memac, fixed_link);
|
|
-
|
|
- memac->pcsphy->mdio.addr = phy_addr;
|
|
- }
|
|
- }
|
|
+ if (memac->phy_if == PHY_INTERFACE_MODE_SGMII)
|
|
+ setup_sgmii_internal(memac, memac->sgmii_pcs, fixed_link);
|
|
+ else if (memac->phy_if == PHY_INTERFACE_MODE_QSGMII)
|
|
+ setup_sgmii_internal(memac, memac->qsgmii_pcs, fixed_link);
|
|
|
|
/* Max Frame Length */
|
|
err = fman_set_mac_max_frame(memac->fm, memac->mac_id,
|
|
@@ -1097,12 +976,25 @@ static int memac_init(struct fman_mac *m
|
|
return 0;
|
|
}
|
|
|
|
+static void pcs_put(struct phylink_pcs *pcs)
|
|
+{
|
|
+ struct mdio_device *mdiodev;
|
|
+
|
|
+ if (IS_ERR_OR_NULL(pcs))
|
|
+ return;
|
|
+
|
|
+ mdiodev = lynx_get_mdio_device(pcs);
|
|
+ lynx_pcs_destroy(pcs);
|
|
+ mdio_device_free(mdiodev);
|
|
+}
|
|
+
|
|
static int memac_free(struct fman_mac *memac)
|
|
{
|
|
free_init_resources(memac);
|
|
|
|
- if (memac->pcsphy)
|
|
- put_device(&memac->pcsphy->mdio.dev);
|
|
+ pcs_put(memac->sgmii_pcs);
|
|
+ pcs_put(memac->qsgmii_pcs);
|
|
+ pcs_put(memac->xfi_pcs);
|
|
|
|
kfree(memac->memac_drv_param);
|
|
kfree(memac);
|
|
@@ -1153,12 +1045,31 @@ static struct fman_mac *memac_config(str
|
|
return memac;
|
|
}
|
|
|
|
+static struct phylink_pcs *memac_pcs_create(struct device_node *mac_node,
|
|
+ int index)
|
|
+{
|
|
+ struct device_node *node;
|
|
+ struct mdio_device *mdiodev = NULL;
|
|
+ struct phylink_pcs *pcs;
|
|
+
|
|
+ node = of_parse_phandle(mac_node, "pcsphy-handle", index);
|
|
+ if (node && of_device_is_available(node))
|
|
+ mdiodev = of_mdio_find_device(node);
|
|
+ of_node_put(node);
|
|
+
|
|
+ if (!mdiodev)
|
|
+ return ERR_PTR(-EPROBE_DEFER);
|
|
+
|
|
+ pcs = lynx_pcs_create(mdiodev);
|
|
+ return pcs;
|
|
+}
|
|
+
|
|
int memac_initialization(struct mac_device *mac_dev,
|
|
struct device_node *mac_node,
|
|
struct fman_mac_params *params)
|
|
{
|
|
int err;
|
|
- struct device_node *phy_node;
|
|
+ struct phylink_pcs *pcs;
|
|
struct fixed_phy_status *fixed_link;
|
|
struct fman_mac *memac;
|
|
|
|
@@ -1188,23 +1099,58 @@ int memac_initialization(struct mac_devi
|
|
memac = mac_dev->fman_mac;
|
|
memac->memac_drv_param->max_frame_length = fman_get_max_frm();
|
|
memac->memac_drv_param->reset_on_init = true;
|
|
- if (memac->phy_if == PHY_INTERFACE_MODE_SGMII ||
|
|
- memac->phy_if == PHY_INTERFACE_MODE_QSGMII) {
|
|
- phy_node = of_parse_phandle(mac_node, "pcsphy-handle", 0);
|
|
- if (!phy_node) {
|
|
- pr_err("PCS PHY node is not available\n");
|
|
- err = -EINVAL;
|
|
+
|
|
+ err = of_property_match_string(mac_node, "pcs-handle-names", "xfi");
|
|
+ if (err >= 0) {
|
|
+ memac->xfi_pcs = memac_pcs_create(mac_node, err);
|
|
+ if (IS_ERR(memac->xfi_pcs)) {
|
|
+ err = PTR_ERR(memac->xfi_pcs);
|
|
+ dev_err_probe(mac_dev->dev, err, "missing xfi pcs\n");
|
|
goto _return_fm_mac_free;
|
|
}
|
|
+ } else if (err != -EINVAL && err != -ENODATA) {
|
|
+ goto _return_fm_mac_free;
|
|
+ }
|
|
|
|
- memac->pcsphy = of_phy_find_device(phy_node);
|
|
- if (!memac->pcsphy) {
|
|
- pr_err("of_phy_find_device (PCS PHY) failed\n");
|
|
- err = -EINVAL;
|
|
+ err = of_property_match_string(mac_node, "pcs-handle-names", "qsgmii");
|
|
+ if (err >= 0) {
|
|
+ memac->qsgmii_pcs = memac_pcs_create(mac_node, err);
|
|
+ if (IS_ERR(memac->qsgmii_pcs)) {
|
|
+ err = PTR_ERR(memac->qsgmii_pcs);
|
|
+ dev_err_probe(mac_dev->dev, err,
|
|
+ "missing qsgmii pcs\n");
|
|
goto _return_fm_mac_free;
|
|
}
|
|
+ } else if (err != -EINVAL && err != -ENODATA) {
|
|
+ goto _return_fm_mac_free;
|
|
+ }
|
|
+
|
|
+ /* For compatibility, if pcs-handle-names is missing, we assume this
|
|
+ * phy is the first one in pcsphy-handle
|
|
+ */
|
|
+ err = of_property_match_string(mac_node, "pcs-handle-names", "sgmii");
|
|
+ if (err == -EINVAL || err == -ENODATA)
|
|
+ pcs = memac_pcs_create(mac_node, 0);
|
|
+ else if (err < 0)
|
|
+ goto _return_fm_mac_free;
|
|
+ else
|
|
+ pcs = memac_pcs_create(mac_node, err);
|
|
+
|
|
+ if (!pcs) {
|
|
+ dev_err(mac_dev->dev, "missing pcs\n");
|
|
+ err = -ENOENT;
|
|
+ goto _return_fm_mac_free;
|
|
}
|
|
|
|
+ /* If err is set here, it means that pcs-handle-names was missing above
|
|
+ * (and therefore that xfi_pcs cannot be set). If we are defaulting to
|
|
+ * XGMII, assume this is for XFI. Otherwise, assume it is for SGMII.
|
|
+ */
|
|
+ if (err && mac_dev->phy_if == PHY_INTERFACE_MODE_XGMII)
|
|
+ memac->xfi_pcs = pcs;
|
|
+ else
|
|
+ memac->sgmii_pcs = pcs;
|
|
+
|
|
memac->serdes = devm_of_phy_get(mac_dev->dev, mac_node, "serdes");
|
|
err = PTR_ERR(memac->serdes);
|
|
if (err == -ENODEV || err == -ENOSYS) {
|