mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-26 08:51:13 +00:00
9808b9ae02
Add patches-4.9, some of them (heavily) rewritten: - ea4500 is upstream available, keep only LEDE changes in dts - ea3500 is changed to match the structure of the upstream ea4500 dts - nsa310s rewritten to include the common dtsi - nsa325 is dropped, since already upstream Signed-off-by: Paul Wassi <p.wassi@gmx.at> Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it> [refresh kernel config, add on100, use the switchdev based mv88e6171 driver for the linksys boards, keep lede specific rootfs/kernel partition names for linksys boards, reorder patches] Signed-off-by: Mathias Kresin <dev@kresin.me>
131 lines
2.6 KiB
Diff
131 lines
2.6 KiB
Diff
--- a/arch/arm/boot/dts/Makefile
|
|
+++ b/arch/arm/boot/dts/Makefile
|
|
@@ -207,6 +207,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
|
|
kirkwood-ds411.dtb \
|
|
kirkwood-ds411j.dtb \
|
|
kirkwood-ds411slim.dtb \
|
|
+ kirkwood-goflexhome.dtb \
|
|
kirkwood-goflexnet.dtb \
|
|
kirkwood-guruplug-server-plus.dtb \
|
|
kirkwood-ib62x0.dtb \
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/kirkwood-goflexhome.dts
|
|
@@ -0,0 +1,117 @@
|
|
+/dts-v1/;
|
|
+
|
|
+#include "kirkwood.dtsi"
|
|
+#include "kirkwood-6281.dtsi"
|
|
+
|
|
+/ {
|
|
+ model = "Seagate GoFlex Home";
|
|
+ compatible = "seagate,goflexhome", "marvell,kirkwood-88f6281", "marvell,kirkwood";
|
|
+
|
|
+ memory {
|
|
+ device_type = "memory";
|
|
+ reg = <0x00000000 0x8000000>;
|
|
+ };
|
|
+
|
|
+ chosen {
|
|
+ bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
|
|
+ stdout-path = &uart0;
|
|
+ };
|
|
+
|
|
+ ocp@f1000000 {
|
|
+ pinctrl: pin-controller@10000 {
|
|
+ pmx_usb_power_enable: pmx-usb-power-enable {
|
|
+ marvell,pins = "mpp29";
|
|
+ marvell,function = "gpio";
|
|
+ };
|
|
+ pmx_led_white: pmx-led-white {
|
|
+ marvell,pins = "mpp40";
|
|
+ marvell,function = "gpio";
|
|
+ };
|
|
+ pmx_led_green: pmx-led_green {
|
|
+ marvell,pins = "mpp46";
|
|
+ marvell,function = "gpio";
|
|
+ };
|
|
+ pmx_led_orange: pmx-led-orange {
|
|
+ marvell,pins = "mpp47";
|
|
+ marvell,function = "gpio";
|
|
+ };
|
|
+ };
|
|
+ serial@12000 {
|
|
+ status = "ok";
|
|
+ };
|
|
+
|
|
+ sata@80000 {
|
|
+ status = "okay";
|
|
+ nr-ports = <2>;
|
|
+ };
|
|
+
|
|
+ };
|
|
+ gpio-leds {
|
|
+ compatible = "gpio-leds";
|
|
+
|
|
+ health {
|
|
+ label = "status:green:health";
|
|
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
|
|
+ linux,default-trigger = "default-on";
|
|
+ };
|
|
+ fault {
|
|
+ label = "status:orange:fault";
|
|
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+ misc {
|
|
+ label = "status:white:misc";
|
|
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
|
|
+ linux,default-trigger = "disk-activity";
|
|
+ };
|
|
+ };
|
|
+ regulators {
|
|
+ compatible = "simple-bus";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ pinctrl-0 = <&pmx_usb_power_enable>;
|
|
+ pinctrl-names = "default";
|
|
+
|
|
+ usb_power: regulator@1 {
|
|
+ compatible = "regulator-fixed";
|
|
+ reg = <1>;
|
|
+ regulator-name = "USB Power";
|
|
+ regulator-min-microvolt = <5000000>;
|
|
+ regulator-max-microvolt = <5000000>;
|
|
+ enable-active-high;
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+&nand {
|
|
+ chip-delay = <40>;
|
|
+ status = "okay";
|
|
+
|
|
+ partition@0 {
|
|
+ label = "u-boot";
|
|
+ reg = <0x0000000 0x100000>;
|
|
+ read-only;
|
|
+ };
|
|
+
|
|
+ partition@100000 {
|
|
+ label = "ubi";
|
|
+ reg = <0x100000 0x0ff00000>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&mdio {
|
|
+ status = "okay";
|
|
+
|
|
+ ethphy0: ethernet-phy@0 {
|
|
+ reg = <0>;
|
|
+ };
|
|
+};
|
|
+
|
|
+ð0 {
|
|
+ status = "okay";
|
|
+ ethernet0-port@0 {
|
|
+ phy-handle = <ðphy0>;
|
|
+ };
|
|
+};
|