mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-19 19:27:27 +00:00
This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git.
8c7e9cc6b5
This adds support for the Ubiquiti PowerBridge M, which has the same board/LEDs as the Bullet M XM, but different case and antennas. Specifications: - AR7241 SoC @ 400 MHz - 64 MB RAM - 8 MB SPI flash - 1x 10/100 Mbps Ethernet, 24 Vdc PoE-in - Internal antenna: 25 dBi - POWER/LAN green LEDs - 4x RSSI LEDs (red, orange, green, green) - UART (115200 8N1) on PCB Flashing via WebUI: Upload the factory image via the stock firmware web UI. Attention: airOS firmware versions >= 5.6 have a new bootloader with an incompatible partition table! Please downgrade to <= 5.5 _before_ flashing OpenWrt! Refer to the device's Wiki page for further information. Flashing via TFTP: Same procedure as other Bullet M (XM) boards. - Use a pointy tool (e.g., pen cap, paper clip) and keep the reset button on the device or on the PoE supply pressed - Power on the device via PoE (keep reset button pressed) - Keep pressing until LEDs flash alternatively LED1+LED3 => LED2+LED4 => LED1+LED3, etc. - Release reset button - The device starts a TFTP server at 192.168.1.20 - Set a static IP on the computer (e.g., 192.168.1.21/24) - Upload via tftp the factory image: $ tftp 192.168.1.20 tftp> bin tftp> trace tftp> put openwrt-ath79-generic-xxxxx-ubnt_powerbridge-m-squashfs-factory.bin Signed-off-by: Vieno Hakkerinen <vieno@hakkerinen.eu> |
||
---|---|---|
.github | ||
config | ||
include | ||
package | ||
scripts | ||
target | ||
toolchain | ||
tools | ||
.gitattributes | ||
.gitignore | ||
BSDmakefile | ||
Config.in | ||
feeds.conf.default | ||
LICENSE | ||
Makefile | ||
README | ||
rules.mk |
_______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- This is the buildsystem for the OpenWrt Linux distribution. To build your own firmware you need a Linux, BSD or MacOSX system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system. You need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers installed. 1. Run "./scripts/feeds update -a" to obtain all the latest package definitions defined in feeds.conf / feeds.conf.default 2. Run "./scripts/feeds install -a" to install symlinks for all obtained packages into package/feeds/ 3. Run "make menuconfig" to select your preferred configuration for the toolchain, target system & firmware packages. 4. Run "make" to build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the Linux kernel & all chosen applications for your target system. Sunshine! Your OpenWrt Community http://www.openwrt.org