Dmytro Oz 8c556af1e3 ramips: mt7621: add support for Xiaomi Mi Router 4 ... Xiaomi Mi Router 4 is the same as Xiaomi Mi Router 3G, except for the RAM (256Mib→128Mib), LEDs and gpio (MiNet button). Specifications: Power: 12 VDC, 1 A Connector type: barrel CPU1: MediaTek MT7621A (880 MHz, 4 cores) FLA1: 128 MiB (ESMT F59L1G81MA) RAM1: 128 MiB (ESMT M15T1G1664A) WI1 chip1: MediaTek MT7603EN WI1 802dot11 protocols: bgn WI1 MIMO config: 2x2:2 WI1 antenna connector: U.FL WI2 chip1: MediaTek MT7612EN WI2 802dot11 protocols: an+ac WI2 MIMO config: 2x2:2 WI2 antenna connector: U.FL ETH chip1: MediaTek MT7621A Switch: MediaTek MT7621A UART Serial [o] TX [o] GND [o] RX [ ] VCC - Do not connect it MAC addresses as verified by OEM firmware: use address source LAN *:c2 factory 0xe000 (label) WAN *:c3 factory 0xe006 2g *:c4 factory 0x0000 5g *:c5 factory 0x8000 Flashing instructions: 1.Create a simple http server (nginx etc) 2.set uart enable To enable writing to the console, you must reset to factory settings Then you see uboot boot, press the keyboard 4 button (enter uboot command line) If it is not successful, repeat the above operation of restoring the factory settings. After entering the uboot command line, type: setenv uart_en 1 saveenv boot 3.use shell in uart cd /tmp wget http://"your_computer_ip:80"/openwrt-ramips-mt7621-xiaomi_mir4-squashfs-kernel1.bin wget http://"your_computer_ip:80"/openwrt-ramips-mt7621-xiaomi_mir4-squashfs-rootfs0.bin mtd write openwrt-ramips-mt7621-xiaomi_mir4-squashfs-kernel1.bin kernel1 mtd write openwrt-ramips-mt7621-xiaomi_mir4-squashfs-rootfs0.bin rootfs0 nvram set flag_try_sys1_failed=1 nvram commit reboot 4.login to the router http://192.168.1.1/ Installation via Software exploit Find the instructions in the https://github.com/acecilia/OpenWRTInvasion Signed-off-by: Dmytro Oz <sequentiality@gmail.com> [commit message facelift, rebase onto shared DTSI/common device definition, bump uboot-envtools] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: maurerr <mariusd84@gmail.com>		2021-09-01 08:07:30 +00:00
..
base-files/etc	ramips: remove model name from LED labels	2021-09-01 08:07:03 +00:00
dts	ramips: mt7621: add support for Xiaomi Mi Router 4	2021-09-01 08:07:30 +00:00
files/drivers	ramips: drop kernel version switches	2021-09-01 08:07:04 +00:00
image	ramips: mt7621: add support for Xiaomi Mi Router 4	2021-09-01 08:07:30 +00:00
mt76x8	ramips: use full names for Xiaomi Mi Router devices	2021-09-01 08:07:20 +00:00
mt7620	ramips: add support for Wavlink WL-WN530HG4	2021-09-01 08:07:07 +00:00
mt7621	ramips: mt7621: add support for Xiaomi Mi Router 4	2021-09-01 08:07:30 +00:00
patches-5.4	kernel: bump 5.4 to 5.4.87	2021-09-01 08:07:27 +00:00
rt288x	ramips: remove set_wifi_led function in 01_leds	2021-09-01 08:07:03 +00:00
rt305x	ramips: remove set_wifi_led function in 01_leds	2021-09-01 08:07:03 +00:00
rt3883	ramips: add support for Senao Engenius ESR600H	2021-09-01 08:07:23 +00:00
Makefile	ramips: switch rt305x subtarget to kernel 5.4	2020-08-05 23:27:35 +02:00
modules.mk	ramips: drop kernel version switches	2021-09-01 08:07:04 +00:00