Kyle Hendry 1a69543376 bmips: add support for SmartRG SR505n ... Specifications: - SoC: Broadcom BCM63168 dual 400MHz MIPS - Flash: 16MB SPI NOR W25Q128WFG - RAM: 128MB DDR3 W631GG6KB-15 - Ethernet: 1x 1000M, 3x 100M - Wifi: BCM435F - 1x USB 2.0 port - 3x Button - 12x LED Flashing via serial - Connect to the 3.3V TTL UART on the board (J6 pinout Vcc Rx Tx Gnd) at 115200-8-N-1 - Press any key in the serial console when powering up the board to enter the CFE prompt - Configure an interface on your workstation to static IP 192.168.1.100 and connect it to the board - Start a TFTP server with the firmware image - On the CFE prompt, enter the command "f 192.168.1.100:openwrt-bmips-bcm63268-smartrg_sr505n-squashfs-cfe.bin" Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com> [Remove unneeded LED labels] Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>		2024-03-10 20:26:07 +01:00
..
base-files	bmips: add support for SmartRG SR505n	2024-03-10 20:26:07 +01:00
config-6.1	kernel: migrate FORCE_MAX_ZONEORDER to ARCH_FORCE_MAX_ORDER for 6.1	2023-06-25 11:26:50 +02:00
target.mk