mirror of
https://github.com/openwrt/openwrt.git
synced 2025-02-09 04:12:15 +00:00
fc4fd28046
The ASRock G10 is a 2.4/5 GHz band 11ac "Gaming" router,
based on Qualcomm IPQ8064.
Specifications:
SoC: Qualcomm IPQ8064
CPU: Dual-Core A15 @ (384 - 1,400 MHz, 2C2T)
DRAM: 512 MiB (~467 MiB available)
NAND: 128 MB (Micron MT29F1G08ABBEAH4)
WLAN0: 4T4R 5 GHz Wlan (QCA9980)
WLAN1: 4T4R 2.4 GHz Wlan (QCA9980)
ETH: 5x 10/100/1000 Mbps Ethernet (QCA8337)
INPUT: Reset Button, WPS 2.4G and WPS 5G Button
LEDS: 1 multicolor status LED
USB: 2x USB 3.0 Type-A
POWER: 12VDC/3A AC Adapter + dedicated Power Switch
UART: Setting is 115200-8-N-1. 1x4 .1" unpopulated header
on the PCB (J6 - very tiny silkscreen next to TX).
Pinout: 1. 3v3 (Square - best skipped!), 2. RX, 3. GND, 4. TX
WARNING: The serial port needs a TTL/RS-232 3.3v level converter!
(Depending on the serial adapter RX and TX might need to
be swapped).
Note about the IR-Remote:
There's a 8-Bit MCU (SONIX SN8F25E21SG) which is controlling the
IR-Remote and is fed by the IR-Photodiode. The SoC can talk to
the device via I2C. The vendor's GPL archive comes with the source
of the interface driver for this as a (character driver), the main
control software is however a blob.
Installation Instructions:
1. Download factory image to disk
2. Apply factory image via stock web-gui
Back to stock:
1. Login to router via ssh
2. run "asrock_g10_back_to_factory" script from /sbin
Notes:
- If something goes wrong durring sysupgrade, router will go back to
factory image.
- Asrock G10 uses partition layout from smem. So partition layout can
be normal or alternate.
- 900-arm-add-cmdline-override.patch was copied from 102-powerpc-add-cmdline-override.patch
from powerpc target.
Knowledge about BOOTCONFIG partition was based on user "jmomo" post from old
OpenWrt forum (Post #50):
https://forum.archive.openwrt.org/viewtopic.php?id=65956&p=2
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
[bump to 5.4, add factory image, fix sysupgrade, convert partition
layout to smem, remove ipq-wifi-asrock-g10 and use ART, minor fixes]
Co-Authored-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Tested-by: Lukasz Ostapiuk <palibrzuch@gmail.com>
Signed-off-by: maurerr <mariusd84@gmail.com>
372 lines
10 KiB
Makefile
372 lines
10 KiB
Makefile
# Copyright (c) 2014 The Linux Foundation. All rights reserved.
|
|
#
|
|
include $(TOPDIR)/rules.mk
|
|
include $(INCLUDE_DIR)/image.mk
|
|
|
|
DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
|
|
DEVICE_VARS += TPLINK_BOARD_ID
|
|
|
|
define Build/buffalo-rootfs-cksum
|
|
( \
|
|
echo -ne "\x$$(od -A n -t u1 $@ | tr -s ' ' '\n' | \
|
|
$(STAGING_DIR_HOST)/bin/awk '{s+=$$0}END{printf "%x", 255-s%256}')"; \
|
|
) >> $@
|
|
endef
|
|
|
|
define Build/edimax-header
|
|
$(eval edimax_model=$(word 1,$(1)))
|
|
|
|
$(STAGING_DIR_HOST)/bin/mkedimaximg \
|
|
-b -s CSYS -m $(edimax_model) \
|
|
-f 0x70000 -S 0x1200000 \
|
|
-i $@ -o $@.new
|
|
@mv $@.new $@
|
|
endef
|
|
|
|
define Device/Default
|
|
PROFILES := Default
|
|
KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
|
|
KERNEL_INITRAMFS_PREFIX := $$(IMG_PREFIX)-$(1)-initramfs
|
|
KERNEL_PREFIX := $$(IMAGE_PREFIX)
|
|
KERNEL_LOADADDR = 0x42208000
|
|
DEVICE_DTS = $$(SOC)-$(lastword $(subst _, ,$(1)))
|
|
SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
|
|
IMAGE/sysupgrade.bin/squashfs :=
|
|
endef
|
|
|
|
define Device/LegacyImage
|
|
KERNEL_SUFFIX := -uImage
|
|
KERNEL = kernel-bin | append-dtb | uImage none
|
|
KERNEL_NAME := zImage
|
|
endef
|
|
|
|
define Device/FitImage
|
|
KERNEL_SUFFIX := -fit-uImage.itb
|
|
KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
|
|
KERNEL_NAME := Image
|
|
endef
|
|
|
|
define Device/FitImageLzma
|
|
KERNEL_SUFFIX := -fit-uImage.itb
|
|
KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb
|
|
KERNEL_NAME := Image
|
|
endef
|
|
|
|
define Device/UbiFit
|
|
KERNEL_IN_UBI := 1
|
|
IMAGES := nand-factory.bin nand-sysupgrade.bin
|
|
IMAGE/nand-factory.bin := append-ubi
|
|
IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
|
|
define Device/DniImage
|
|
KERNEL_SUFFIX := -uImage
|
|
KERNEL = kernel-bin | append-dtb | uImage none
|
|
KERNEL_NAME := zImage
|
|
NETGEAR_BOARD_ID :=
|
|
NETGEAR_HW_ID :=
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGES += factory.img
|
|
IMAGE/factory.img := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | netgear-dni
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakehdr filesystem | sysupgrade-tar kernel=$$$$@ | append-metadata
|
|
endef
|
|
|
|
define Device/TpSafeImage
|
|
KERNEL_SUFFIX := -uImage
|
|
KERNEL = kernel-bin | append-dtb | uImage none
|
|
KERNEL_NAME := zImage
|
|
TPLINK_BOARD_ID :=
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
|
|
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | append-metadata
|
|
endef
|
|
|
|
define Device/ZyXELImage
|
|
KERNEL_SUFFIX := -uImage
|
|
KERNEL = kernel-bin | append-dtb | uImage none | pad-to $$(KERNEL_SIZE)
|
|
KERNEL_NAME := zImage
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to $$$$(BLOCKSIZE) | zyxel-ras-image separate-kernel
|
|
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to $$$$(BLOCKSIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
|
|
endef
|
|
|
|
define Device/asrock_g10
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
SOC := qcom-ipq8064
|
|
DEVICE_VENDOR := ASRock
|
|
DEVICE_MODEL := G10
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_SIZE := 5332k
|
|
DEVICE_PACKAGES := kmod-i2c-gpio ath10k-firmware-qca99x0-ct
|
|
IMAGE/nand-factory.bin := append-ubi | edimax-header RN67
|
|
endef
|
|
TARGET_DEVICES += asrock_g10
|
|
|
|
define Device/buffalo_wxr-2533dhp
|
|
$(call Device/LegacyImage)
|
|
SOC := qcom-ipq8064
|
|
DEVICE_VENDOR := Buffalo
|
|
DEVICE_MODEL := WXR-2533DHP
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 65536k
|
|
KERNEL_IN_UBI := 1
|
|
IMAGE/sysupgrade.bin := append-rootfs | buffalo-rootfs-cksum | \
|
|
sysupgrade-tar rootfs=$$$$@ | append-metadata
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += buffalo_wxr-2533dhp
|
|
|
|
define Device/compex_wpq864
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Compex
|
|
DEVICE_MODEL := WPQ864
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
SOC := qcom-ipq8064
|
|
DEVICE_PACKAGES := kmod-gpio-beeper
|
|
endef
|
|
TARGET_DEVICES += compex_wpq864
|
|
|
|
define Device/edgecore_ecw5410
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Edgecore
|
|
DEVICE_MODEL := ECW5410
|
|
SOC := qcom-ipq8068
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_DTS_CONFIG := config@v2.0-ap160
|
|
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct ipq-wifi-edgecore_ecw5410
|
|
endef
|
|
TARGET_DEVICES += edgecore_ecw5410
|
|
|
|
define Device/linksys_ea7500-v1
|
|
$(call Device/LegacyImage)
|
|
DEVICE_VENDOR := Linksys
|
|
DEVICE_MODEL := EA7500
|
|
DEVICE_VARIANT := v1
|
|
SOC := qcom-ipq8064
|
|
PAGESIZE := 2048
|
|
BLOCKSIZE := 128k
|
|
KERNEL_SIZE := 3072k
|
|
KERNEL = kernel-bin | append-dtb | uImage none | append-uImage-fakehdr filesystem
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGES := factory.bin sysupgrade.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | pad-to $$$$(PAGESIZE)
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += linksys_ea7500-v1
|
|
|
|
define Device/linksys_ea8500
|
|
$(call Device/LegacyImage)
|
|
DEVICE_VENDOR := Linksys
|
|
DEVICE_MODEL := EA8500
|
|
SOC := qcom-ipq8064
|
|
PAGESIZE := 2048
|
|
BLOCKSIZE := 128k
|
|
KERNEL_SIZE := 3072k
|
|
KERNEL = kernel-bin | append-dtb | uImage none | append-uImage-fakehdr filesystem
|
|
BOARD_NAME := ea8500
|
|
SUPPORTED_DEVICES += ea8500
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += linksys_ea8500
|
|
|
|
define Device/nec_wg2600hp
|
|
$(call Device/LegacyImage)
|
|
DEVICE_VENDOR := NEC
|
|
DEVICE_MODEL := Aterm WG2600HP
|
|
SOC := qcom-ipq8064
|
|
BLOCKSIZE := 64k
|
|
BOARD_NAME := wg2600hp
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += nec_wg2600hp
|
|
|
|
define Device/netgear_d7800
|
|
$(call Device/DniImage)
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := Nighthawk X4 D7800
|
|
SOC := qcom-ipq8064
|
|
KERNEL_SIZE := 4096k
|
|
NETGEAR_BOARD_ID := D7800
|
|
NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := d7800
|
|
SUPPORTED_DEVICES += d7800
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += netgear_d7800
|
|
|
|
define Device/netgear_r7500
|
|
$(call Device/DniImage)
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := Nighthawk X4 R7500
|
|
DEVICE_VARIANT := v1
|
|
SOC := qcom-ipq8064
|
|
KERNEL_SIZE := 4096k
|
|
NETGEAR_BOARD_ID := R7500
|
|
NETGEAR_HW_ID := 29764841+0+128+256+3x3+4x4
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := r7500
|
|
SUPPORTED_DEVICES += r7500
|
|
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct
|
|
endef
|
|
TARGET_DEVICES += netgear_r7500
|
|
|
|
define Device/netgear_r7500v2
|
|
$(call Device/DniImage)
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := Nighthawk X4 R7500
|
|
DEVICE_VARIANT := v2
|
|
SOC := qcom-ipq8064
|
|
KERNEL_SIZE := 4096k
|
|
NETGEAR_BOARD_ID := R7500v2
|
|
NETGEAR_HW_ID := 29764958+0+128+512+3x3+4x4
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := r7500v2
|
|
SUPPORTED_DEVICES += r7500v2
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct ath10k-firmware-qca988x-ct
|
|
endef
|
|
TARGET_DEVICES += netgear_r7500v2
|
|
|
|
define Device/netgear_r7800
|
|
$(call Device/DniImage)
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := Nighthawk X4S R7800
|
|
SOC := qcom-ipq8065
|
|
KERNEL_SIZE := 4096k
|
|
NETGEAR_BOARD_ID := R7800
|
|
NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4+cascade
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := r7800
|
|
SUPPORTED_DEVICES += r7800
|
|
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
|
|
endef
|
|
TARGET_DEVICES += netgear_r7800
|
|
|
|
define Device/qcom_ipq8064-ap148
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Qualcomm
|
|
DEVICE_MODEL := AP148
|
|
DEVICE_VARIANT := standard
|
|
SOC := qcom-ipq8064
|
|
DEVICE_DTS := qcom-ipq8064-ap148
|
|
KERNEL_INSTALL := 1
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := ap148
|
|
SUPPORTED_DEVICES += ap148
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += qcom_ipq8064-ap148
|
|
|
|
define Device/qcom_ipq8064-ap148-legacy
|
|
$(call Device/LegacyImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Qualcomm
|
|
DEVICE_MODEL := AP148
|
|
DEVICE_VARIANT := legacy
|
|
SOC := qcom-ipq8064
|
|
DEVICE_DTS := qcom-ipq8064-ap148
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := ap148
|
|
SUPPORTED_DEVICES := qcom,ipq8064-ap148 ap148
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += qcom_ipq8064-ap148-legacy
|
|
|
|
define Device/qcom_ipq8064-ap161
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Qualcomm
|
|
DEVICE_MODEL := AP161
|
|
SOC := qcom-ipq8064
|
|
DEVICE_DTS := qcom-ipq8064-ap161
|
|
KERNEL_INSTALL := 1
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := ap161
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += qcom_ipq8064-ap161
|
|
|
|
define Device/qcom_ipq8064-db149
|
|
$(call Device/FitImage)
|
|
DEVICE_VENDOR := Qualcomm
|
|
DEVICE_MODEL := DB149
|
|
SOC := qcom-ipq8064
|
|
DEVICE_DTS := qcom-ipq8064-db149
|
|
KERNEL_INSTALL := 1
|
|
BOARD_NAME := db149
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += qcom_ipq8064-db149
|
|
|
|
define Device/tplink_c2600
|
|
$(call Device/TpSafeImage)
|
|
DEVICE_VENDOR := TP-Link
|
|
DEVICE_MODEL := Archer C2600
|
|
DEVICE_VARIANT := v1
|
|
SOC := qcom-ipq8064
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := c2600
|
|
SUPPORTED_DEVICES += c2600
|
|
TPLINK_BOARD_ID := C2600
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += tplink_c2600
|
|
|
|
define Device/tplink_vr2600v
|
|
DEVICE_VENDOR := TP-Link
|
|
DEVICE_MODEL := Archer VR2600v
|
|
DEVICE_VARIANT := v1
|
|
KERNEL_SUFFIX := -uImage
|
|
KERNEL = kernel-bin | append-dtb | uImage none
|
|
KERNEL_NAME := zImage
|
|
KERNEL_SIZE := 3072k
|
|
SOC := qcom-ipq8064
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := vr2600v
|
|
SUPPORTED_DEVICES += vr2600v
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
|
|
endef
|
|
TARGET_DEVICES += tplink_vr2600v
|
|
|
|
define Device/zyxel_nbg6817
|
|
DEVICE_VENDOR := ZyXEL
|
|
DEVICE_MODEL := NBG6817
|
|
SOC := qcom-ipq8065
|
|
KERNEL_SIZE := 4096k
|
|
BLOCKSIZE := 64k
|
|
BOARD_NAME := nbg6817
|
|
RAS_BOARD := NBG6817
|
|
RAS_ROOTFS_SIZE := 20934k
|
|
RAS_VERSION := "V1.99(OWRT.9999)C0"
|
|
SUPPORTED_DEVICES += nbg6817
|
|
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs kmod-fs-ext4 losetup
|
|
$(call Device/ZyXELImage)
|
|
endef
|
|
TARGET_DEVICES += zyxel_nbg6817
|
|
|
|
$(eval $(call BuildImage))
|