ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-19 05:38:00 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git.
52,031 Commits 9 Branches 74 Tags 902 MiB
C 61.2%
Makefile 19.2%
Shell 6.9%
Roff 6.7%
Perl 2.5%
Other 3.4%
8b09070820
Go to file
Sven Eckelmann 8b09070820 ipq-wifi: Work around Plasma Cloud PA1200 5GHz crash 
It was noticed [1] that the ath10k firmware crashes on 5GHz since OpenWrt
21.02.0. The problem seems to be triggered by the the nonLinearTxFir field
in the 5GHz BDF. If baseEepHeader.nonLinearTxFir (offset 0xc2) is 1 then
the firmware just crashes when setting up the 5Ghz radio using `ifconfig
wlan1 up`:

  ath10k_ahb a800000.wifi: firmware crashed! (guid 9e36ee82-4d2c-4c63-b20b-609a1eaca30c)
  ath10k_ahb a800000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
  ath10k_ahb a800000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
  ath10k_ahb a800000.wifi: firmware ver 10.4-3.6-00140 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32 ba79b746
  ath10k_ahb a800000.wifi: board_file api 2 bmi_id 0:17 crc32 5f400efc
  ath10k_ahb a800000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
  ath10k_ahb a800000.wifi: firmware register dump:
  ath10k_ahb a800000.wifi: [00]: 0x0000000B 0x000015B3 0x009C3C27 0x00975B31
  ath10k_ahb a800000.wifi: [04]: 0x009C3C27 0x00060530 0x00000018 0x004176B8
  ath10k_ahb a800000.wifi: [08]: 0x00405A50 0x00412A30 0x00000000 0x00000000
  ath10k_ahb a800000.wifi: [12]: 0x00000009 0x00000000 0x009B9742 0x009B974F
  ath10k_ahb a800000.wifi: [16]: 0x00971238 0x009B9742 0x00000000 0x00000000
  ath10k_ahb a800000.wifi: [20]: 0x409C3C27 0x004053DC 0x00000D2C 0x00405A60
  ath10k_ahb a800000.wifi: [24]: 0x809C3E13 0x0040543C 0x00000000 0xC09C3C27
  ath10k_ahb a800000.wifi: [28]: 0x809B9AC5 0x0040547C 0x00412A30 0x0040549C
  ath10k_ahb a800000.wifi: [32]: 0x809B8ECD 0x0040549C 0x00000001 0x00412A30
  ath10k_ahb a800000.wifi: [36]: 0x809B8FF3 0x004054CC 0x00412838 0x00000014
  ath10k_ahb a800000.wifi: [40]: 0x809BEF98 0x0040551C 0x0041627C 0x00000002
  ath10k_ahb a800000.wifi: [44]: 0x80986D47 0x0040553C 0x0041627C 0x00416A88
  ath10k_ahb a800000.wifi: [48]: 0x809CBB0A 0x0040559C 0x0041ACC0 0x00000000
  ath10k_ahb a800000.wifi: [52]: 0x809864EE 0x0040560C 0x0041ACC0 0x00000001
  ath10k_ahb a800000.wifi: [56]: 0x809CA8A4 0x0040564C 0x0041ACC0 0x00000001
  ath10k_ahb a800000.wifi: Copy Engine register dump:
  ath10k_ahb a800000.wifi: [00]: 0x0004a000  14  14   3   3
  ath10k_ahb a800000.wifi: [01]: 0x0004a400  16  16  22  23
  ath10k_ahb a800000.wifi: [02]: 0x0004a800   3   3   2   3
  ath10k_ahb a800000.wifi: [03]: 0x0004ac00  15  15  15  15
  ath10k_ahb a800000.wifi: [04]: 0x0004b000   4   4  44   4
  ath10k_ahb a800000.wifi: [05]: 0x0004b400   3   3   2   3
  ath10k_ahb a800000.wifi: [06]: 0x0004b800   1   1   1   1
  ath10k_ahb a800000.wifi: [07]: 0x0004bc00   1   1   1   1
  ath10k_ahb a800000.wifi: [08]: 0x0004c000   0   0 127   0
  ath10k_ahb a800000.wifi: [09]: 0x0004c400   0   0   0   0
  ath10k_ahb a800000.wifi: [10]: 0x0004c800   0   0   0   0
  ath10k_ahb a800000.wifi: [11]: 0x0004cc00   0   0   0   0
  ath10k_ahb a800000.wifi: failed to update channel list: -108
  ath10k_ahb a800000.wifi: failed to set pdev regdomain: -108
  ath10k_ahb a800000.wifi: failed to create WMI vdev 0: -108
  ieee80211 phy1: Hardware restart was requested

Since no actual solution is known (besides downgrading the ath10k firmware)
it seems to be better to disable the nonLinearTxFir for now.

[1] https://lore.kernel.org/ath10k/3423718.UToCqzeSYe@ripper/

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2021-09-23 20:50:58 +02:00
.github build: Update README & github help 2018-07-08 09:41:53 +01:00
config build: Replace KERNEL_LOCKUP_DETECTOR with KERNEL_SOFTLOCKUP_DETECTOR 2021-09-13 13:04:21 +02:00
include scripts: mkits.sh: Allow legacy @ mode for dts creation 2021-09-23 20:49:32 +02:00
LICENSES LICENSES: include all used licenses in LICENSES directory 2021-02-14 19:21:38 +01:00
package ipq-wifi: Work around Plasma Cloud PA1200 5GHz crash 2021-09-23 20:50:58 +02:00
scripts scripts: mkits.sh: Allow legacy @ mode for dts creation 2021-09-23 20:49:32 +02:00
target bcm53xx: MR32: read mac-address from eeprom 2021-09-23 20:50:58 +02:00
toolchain toolchain/binutils: switch to version 2.37 by default 2021-09-22 19:37:24 -10:00
tools libtool: Revert "libtool: bump to 2.4.6" 2021-09-23 13:39:11 +02:00
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 2012-05-08 13:30:49 +00:00
.gitignore .gitignore: ignore any .vscode* file 2021-07-02 09:50:12 -10:00
BSDmakefile build: use SPDX license tags 2021-02-05 14:54:47 +01:00
Config.in build: use SPDX license tags 2021-02-05 14:54:47 +01:00
COPYING COPYING: add COPYING file to specify project licenses 2021-02-14 19:21:38 +01:00
feeds.conf.default feeds: management: remove dead and out of project feed 2021-05-01 00:37:15 +02:00
Makefile Revert "build: replace which with Bash command built-in" 2021-03-03 22:51:39 +01:00
README.md README: switch from freenode to oftc 2021-06-12 12:39:35 -10:00
rules.mk build: remove GCC7 support 2021-09-19 11:26:00 -10:00

README.md

OpenWrt logo

OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.

Sunshine!

Development

To build your own firmware you need a GNU/Linux, BSD or MacOSX system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.

Requirements

You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.

binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.6+ rsync subversion unzip which

Quickstart

  1. Run ./scripts/feeds update -a to obtain all the latest package definitions defined in feeds.conf / feeds.conf.default

  2. Run ./scripts/feeds install -a to install symlinks for all obtained packages into package/feeds/

  3. Run make menuconfig to select your preferred configuration for the toolchain, target system & firmware packages.

  4. Run make to build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.

Related Repositories

The main repository uses multiple sub-repositories to manage packages of different categories. All packages are installed via the OpenWrt package manager called opkg. If you're looking to develop the web interface or port packages to OpenWrt, please find the fitting repository below.

Support Information

For a list of supported devices see the OpenWrt Hardware Database

Documentation

Support Community

  • Forum: For usage, projects, discussions and hardware advise.
  • Support Chat: Channel #openwrt on oftc.net.

Developer Community

License

OpenWrt is licensed under GPL-2.0