mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 15:02:32 +00:00
7d256aff7b
The previous iteration of MediaTek's PHY patches caused various weird bugs. Drop culprit patch 733-10-net-phy-mediatek-Extend-1G-TX-RX-link-pulse-time.patch and use the most recent iteration of the patchset which has been posted to the netdev mailing list. Link: https://patchwork.kernel.org/project/netdevbpf/list/?series=895513&state=* Fixes: #16448 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
183 lines
7.8 KiB
Diff
183 lines
7.8 KiB
Diff
From dbe70a9353b5095a90af61a051486484765ada6f Mon Sep 17 00:00:00 2001
|
|
From: "SkyLake.Huang" <skylake.huang@mediatek.com>
|
|
Date: Fri, 4 Oct 2024 18:24:12 +0800
|
|
Subject: [PATCH 8/9] net: phy: mediatek: Change mtk-ge-soc.c line wrapping
|
|
|
|
This patch shrinks mtk-ge-soc.c line wrapping to 80 characters.
|
|
|
|
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
|
|
---
|
|
drivers/net/phy/mediatek/mtk-ge-soc.c | 67 +++++++++++++++++----------
|
|
1 file changed, 42 insertions(+), 25 deletions(-)
|
|
|
|
--- a/drivers/net/phy/mediatek/mtk-ge-soc.c
|
|
+++ b/drivers/net/phy/mediatek/mtk-ge-soc.c
|
|
@@ -295,7 +295,8 @@ static int cal_cycle(struct phy_device *
|
|
ret = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1,
|
|
MTK_PHY_RG_AD_CAL_CLK, reg_val,
|
|
reg_val & MTK_PHY_DA_CAL_CLK, 500,
|
|
- ANALOG_INTERNAL_OPERATION_MAX_US, false);
|
|
+ ANALOG_INTERNAL_OPERATION_MAX_US,
|
|
+ false);
|
|
if (ret) {
|
|
phydev_err(phydev, "Calibration cycle timeout\n");
|
|
return ret;
|
|
@@ -304,7 +305,7 @@ static int cal_cycle(struct phy_device *
|
|
phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CALIN,
|
|
MTK_PHY_DA_CALIN_FLAG);
|
|
ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CAL_COMP) >>
|
|
- MTK_PHY_AD_CAL_COMP_OUT_SHIFT;
|
|
+ MTK_PHY_AD_CAL_COMP_OUT_SHIFT;
|
|
phydev_dbg(phydev, "cal_val: 0x%x, ret: %d\n", cal_val, ret);
|
|
|
|
return ret;
|
|
@@ -394,38 +395,46 @@ static int tx_amp_fill_result(struct phy
|
|
}
|
|
|
|
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TXVLD_DA_RG,
|
|
- MTK_PHY_DA_TX_I2MPB_A_GBE_MASK, (buf[0] + bias[0]) << 10);
|
|
+ MTK_PHY_DA_TX_I2MPB_A_GBE_MASK,
|
|
+ (buf[0] + bias[0]) << 10);
|
|
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TXVLD_DA_RG,
|
|
MTK_PHY_DA_TX_I2MPB_A_TBT_MASK, buf[0] + bias[1]);
|
|
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_A2,
|
|
- MTK_PHY_DA_TX_I2MPB_A_HBT_MASK, (buf[0] + bias[2]) << 10);
|
|
+ MTK_PHY_DA_TX_I2MPB_A_HBT_MASK,
|
|
+ (buf[0] + bias[2]) << 10);
|
|
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_A2,
|
|
MTK_PHY_DA_TX_I2MPB_A_TST_MASK, buf[0] + bias[3]);
|
|
|
|
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B1,
|
|
- MTK_PHY_DA_TX_I2MPB_B_GBE_MASK, (buf[1] + bias[4]) << 8);
|
|
+ MTK_PHY_DA_TX_I2MPB_B_GBE_MASK,
|
|
+ (buf[1] + bias[4]) << 8);
|
|
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B1,
|
|
MTK_PHY_DA_TX_I2MPB_B_TBT_MASK, buf[1] + bias[5]);
|
|
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B2,
|
|
- MTK_PHY_DA_TX_I2MPB_B_HBT_MASK, (buf[1] + bias[6]) << 8);
|
|
+ MTK_PHY_DA_TX_I2MPB_B_HBT_MASK,
|
|
+ (buf[1] + bias[6]) << 8);
|
|
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B2,
|
|
MTK_PHY_DA_TX_I2MPB_B_TST_MASK, buf[1] + bias[7]);
|
|
|
|
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C1,
|
|
- MTK_PHY_DA_TX_I2MPB_C_GBE_MASK, (buf[2] + bias[8]) << 8);
|
|
+ MTK_PHY_DA_TX_I2MPB_C_GBE_MASK,
|
|
+ (buf[2] + bias[8]) << 8);
|
|
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C1,
|
|
MTK_PHY_DA_TX_I2MPB_C_TBT_MASK, buf[2] + bias[9]);
|
|
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C2,
|
|
- MTK_PHY_DA_TX_I2MPB_C_HBT_MASK, (buf[2] + bias[10]) << 8);
|
|
+ MTK_PHY_DA_TX_I2MPB_C_HBT_MASK,
|
|
+ (buf[2] + bias[10]) << 8);
|
|
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C2,
|
|
MTK_PHY_DA_TX_I2MPB_C_TST_MASK, buf[2] + bias[11]);
|
|
|
|
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D1,
|
|
- MTK_PHY_DA_TX_I2MPB_D_GBE_MASK, (buf[3] + bias[12]) << 8);
|
|
+ MTK_PHY_DA_TX_I2MPB_D_GBE_MASK,
|
|
+ (buf[3] + bias[12]) << 8);
|
|
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D1,
|
|
MTK_PHY_DA_TX_I2MPB_D_TBT_MASK, buf[3] + bias[13]);
|
|
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D2,
|
|
- MTK_PHY_DA_TX_I2MPB_D_HBT_MASK, (buf[3] + bias[14]) << 8);
|
|
+ MTK_PHY_DA_TX_I2MPB_D_HBT_MASK,
|
|
+ (buf[3] + bias[14]) << 8);
|
|
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D2,
|
|
MTK_PHY_DA_TX_I2MPB_D_TST_MASK, buf[3] + bias[15]);
|
|
|
|
@@ -616,7 +625,8 @@ static int tx_vcm_cal_sw(struct phy_devi
|
|
goto restore;
|
|
|
|
/* We calibrate TX-VCM in different logic. Check upper index and then
|
|
- * lower index. If this calibration is valid, apply lower index's result.
|
|
+ * lower index. If this calibration is valid, apply lower index's
|
|
+ * result.
|
|
*/
|
|
ret = upper_ret - lower_ret;
|
|
if (ret == 1) {
|
|
@@ -645,7 +655,8 @@ static int tx_vcm_cal_sw(struct phy_devi
|
|
} else if (upper_idx == TXRESERVE_MAX && upper_ret == 0 &&
|
|
lower_ret == 0) {
|
|
ret = 0;
|
|
- phydev_warn(phydev, "TX-VCM SW cal result at high margin 0x%x\n",
|
|
+ phydev_warn(phydev,
|
|
+ "TX-VCM SW cal result at high margin 0x%x\n",
|
|
upper_idx);
|
|
} else {
|
|
ret = -EINVAL;
|
|
@@ -749,7 +760,8 @@ static void mt7981_phy_finetune(struct p
|
|
|
|
/* TR_OPEN_LOOP_EN = 1, lpf_x_average = 9 */
|
|
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG234,
|
|
- MTK_PHY_TR_OPEN_LOOP_EN_MASK | MTK_PHY_LPF_X_AVERAGE_MASK,
|
|
+ MTK_PHY_TR_OPEN_LOOP_EN_MASK |
|
|
+ MTK_PHY_LPF_X_AVERAGE_MASK,
|
|
BIT(0) | FIELD_PREP(MTK_PHY_LPF_X_AVERAGE_MASK, 0x9));
|
|
|
|
/* rg_tr_lpf_cnt_val = 512 */
|
|
@@ -818,7 +830,8 @@ static void mt7988_phy_finetune(struct p
|
|
|
|
/* TR_OPEN_LOOP_EN = 1, lpf_x_average = 10 */
|
|
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG234,
|
|
- MTK_PHY_TR_OPEN_LOOP_EN_MASK | MTK_PHY_LPF_X_AVERAGE_MASK,
|
|
+ MTK_PHY_TR_OPEN_LOOP_EN_MASK |
|
|
+ MTK_PHY_LPF_X_AVERAGE_MASK,
|
|
BIT(0) | FIELD_PREP(MTK_PHY_LPF_X_AVERAGE_MASK, 0xa));
|
|
|
|
/* rg_tr_lpf_cnt_val = 1023 */
|
|
@@ -930,7 +943,8 @@ static void mt798x_phy_eee(struct phy_de
|
|
phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
|
|
|
|
phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_3);
|
|
- __phy_modify(phydev, MTK_PHY_LPI_REG_14, MTK_PHY_LPI_WAKE_TIMER_1000_MASK,
|
|
+ __phy_modify(phydev, MTK_PHY_LPI_REG_14,
|
|
+ MTK_PHY_LPI_WAKE_TIMER_1000_MASK,
|
|
FIELD_PREP(MTK_PHY_LPI_WAKE_TIMER_1000_MASK, 0x19c));
|
|
|
|
__phy_modify(phydev, MTK_PHY_LPI_REG_1c, MTK_PHY_SMI_DET_ON_THRESH_MASK,
|
|
@@ -940,7 +954,8 @@ static void mt798x_phy_eee(struct phy_de
|
|
phy_modify_mmd(phydev, MDIO_MMD_VEND1,
|
|
MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122,
|
|
MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK,
|
|
- FIELD_PREP(MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK, 0xff));
|
|
+ FIELD_PREP(MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK,
|
|
+ 0xff));
|
|
}
|
|
|
|
static int cal_sw(struct phy_device *phydev, enum CAL_ITEM cal_item,
|
|
@@ -1119,14 +1134,15 @@ static int mt798x_phy_led_brightness_set
|
|
MTK_GPHY_LED_ON_MASK, (value != LED_OFF));
|
|
}
|
|
|
|
-static const unsigned long supported_triggers = (BIT(TRIGGER_NETDEV_FULL_DUPLEX) |
|
|
- BIT(TRIGGER_NETDEV_HALF_DUPLEX) |
|
|
- BIT(TRIGGER_NETDEV_LINK) |
|
|
- BIT(TRIGGER_NETDEV_LINK_10) |
|
|
- BIT(TRIGGER_NETDEV_LINK_100) |
|
|
- BIT(TRIGGER_NETDEV_LINK_1000) |
|
|
- BIT(TRIGGER_NETDEV_RX) |
|
|
- BIT(TRIGGER_NETDEV_TX));
|
|
+static const unsigned long supported_triggers =
|
|
+ (BIT(TRIGGER_NETDEV_FULL_DUPLEX) |
|
|
+ BIT(TRIGGER_NETDEV_HALF_DUPLEX) |
|
|
+ BIT(TRIGGER_NETDEV_LINK) |
|
|
+ BIT(TRIGGER_NETDEV_LINK_10) |
|
|
+ BIT(TRIGGER_NETDEV_LINK_100) |
|
|
+ BIT(TRIGGER_NETDEV_LINK_1000) |
|
|
+ BIT(TRIGGER_NETDEV_RX) |
|
|
+ BIT(TRIGGER_NETDEV_TX));
|
|
|
|
static int mt798x_phy_led_hw_is_supported(struct phy_device *phydev, u8 index,
|
|
unsigned long rules)
|
|
@@ -1189,7 +1205,8 @@ static int mt7988_phy_fix_leds_polaritie
|
|
/* Only now setup pinctrl to avoid bogus blinking */
|
|
pinctrl = devm_pinctrl_get_select(&phydev->mdio.dev, "gbe-led");
|
|
if (IS_ERR(pinctrl))
|
|
- dev_err(&phydev->mdio.bus->dev, "Failed to setup PHY LED pinctrl\n");
|
|
+ dev_err(&phydev->mdio.bus->dev,
|
|
+ "Failed to setup PHY LED pinctrl\n");
|
|
|
|
return 0;
|
|
}
|