openwrt/target/linux/brcm63xx/patches-3.18/526-board_CT6373-1.patch
Jonas Gorski 387fd3ca26 brcm63xx: add kernel 3.18 support
Add 3.18 support based on 3.18-rc6. Only netboot tested.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43461
2014-12-01 13:27:26 +00:00

157 lines
3.7 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -43,6 +43,12 @@
#define NB4_SPI_GPIO_CLK 6
#define NB4_74HC64_GPIO(X) (NB4_74X164_GPIO_BASE + (X))
+#define CT6373_PID_OFFSET 0xff80
+#define CT6373_74X164_GPIO_BASE 64
+#define CT6373_SPI_GPIO_MOSI 7
+#define CT6373_SPI_GPIO_CLK 6
+#define CT6373_74HC64_GPIO(X) (CT6373_74X164_GPIO_BASE + (X))
+
/*
* known 3368 boards
*/
@@ -2035,6 +2041,124 @@ static struct board_info __initdata boar
.num_spis = ARRAY_SIZE(nb4_spi_devices),
};
+
+struct spi_gpio_platform_data ct6373_spi_gpio_data = {
+ .sck = CT6373_SPI_GPIO_CLK,
+ .mosi = CT6373_SPI_GPIO_MOSI,
+ .miso = SPI_GPIO_NO_MISO,
+ .num_chipselect = 1,
+};
+
+static struct platform_device ct6373_spi_gpio = {
+ .name = "spi_gpio",
+ .id = 1,
+ .dev = {
+ .platform_data = &ct6373_spi_gpio_data,
+ },
+};
+
+static struct platform_device * __initdata ct6373_devices[] = {
+ &ct6373_spi_gpio,
+};
+
+#if 0 /* FIXME: 3.14 dropped non-DT support */
+const struct gen_74x164_chip_platform_data ct6373_74x164_platform_data = {
+ .base = CT6373_74X164_GPIO_BASE
+};
+#endif
+
+static struct spi_board_info ct6373_spi_devices[] = {
+#if 0 /* FIXME: 3.14 dropped non-DT support */
+ {
+ .modalias = "74x164",
+ .max_speed_hz = 781000,
+ .bus_num = 1,
+ .controller_data = (void *) SPI_GPIO_NO_CHIPSELECT,
+ .mode = SPI_MODE_0,
+ .platform_data = &ct6373_74x164_platform_data
+ }
+#endif
+};
+
+static struct board_info __initdata board_ct6373_1 = {
+ .name = "CT6373-1",
+ .expected_cpu_id = 0x6358,
+
+ .has_uart0 = 1,
+ .has_pci = 1,
+ .use_fallback_sprom = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .leds = {
+ {
+ .name = "CT6373-1:green:power",
+ .gpio = 0,
+ .default_trigger = "default-on",
+ },
+ {
+ .name = "CT6373-1:green:usb",
+ .gpio = 3,
+ .active_low = 1,
+ },
+ {
+ .name = "CT6373-1:green:wlan",
+ .gpio = 9,
+ .active_low = 1,
+ },
+ {
+ .name = "CT6373-1:green:adsl",
+ .gpio = CT6373_74HC64_GPIO(0),
+ .active_low = 1,
+ },
+ {
+ .name = "CT6373-1:green:line",
+ .gpio = CT6373_74HC64_GPIO(1),
+ .active_low = 1,
+ },
+ {
+ .name = "CT6373-1:green:fxs1",
+ .gpio = CT6373_74HC64_GPIO(2),
+ .active_low = 1,
+ },
+ {
+ .name = "CT6373-1:green:fxs2",
+ .gpio = CT6373_74HC64_GPIO(3),
+ .active_low = 1,
+ },
+ },
+
+ .buttons = {
+ {
+ .desc = "reset",
+ .gpio = 35,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ },
+
+ .fallback_sprom = {
+ .type = SPROM_BCM4318,
+ .pci_bus = 0,
+ .pci_dev = 1,
+ },
+
+ .devs = ct6373_devices,
+ .num_devs = ARRAY_SIZE(ct6373_devices),
+ .spis = ct6373_spi_devices,
+ .num_spis = ARRAY_SIZE(ct6373_spi_devices),
+};
+
static struct board_info __initdata board_HW553 = {
.name = "HW553",
.expected_cpu_id = 0x6358,
@@ -2376,6 +2500,7 @@ static const struct board_info __initcon
&board_dsl_274xb_rev_c,
&board_nb4_ser_r0,
&board_nb4_fxc_r1,
+ &board_ct6373_1,
&board_HW553,
&board_spw303v,
#endif
@@ -2422,6 +2547,7 @@ static struct of_device_id const bcm963x
{ .compatible = "alcatel,rg100a", .data = &board_96358vw2, },
{ .compatible = "brcm,bcm96358vw", .data = &board_96358vw, },
{ .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },
+ { .compatible = "comtrend,ct-6373", .data = &board_ct6373_1, },
{ .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
{ .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
{ .compatible = "huawei,hg553", .data = &board_HW553, },