openwrt/target/linux/apm821xx/base-files/etc
Christian Lamparter 8a042450d8 apm821xx: MX60(W): re-enable + allow bigger future kernels
The MX60's kernel is limited to 0x3EFC00 by the values in
mkmerakifw.c. Since the initramfs method of loading the
kernel seems to be working, this patch does away with the
use of the mkmerakifw tool for the MX60(W).

But this will go along with a change in u-boot as well.
So before you upgrade, please attach the serial cable and
perform:

| setenv owrt510_boot run meraki_ubi owrt_bootargs\; run owrt_load1 owrt_bootkernel\; run owrt_load2 owrt_bootkernel
| setenv bootcmd run owrt510_boot
| saveenv

Note: You won't be able to use older OpenWrt releases without
switching the bootcmd back to owrt_boot!

Note2: We are no longer compatible with older OpenWrt MX60 installs.
the legacy BOARD_NAME and SUPPORTED_DEVICES can be dropped. This is
because upgrades from older images are not possible without uboot env
changes anymore. Also the bogus BLOCKSIZE value
(which was set to 63k back then, in order to get the kernel properly
aligned after the fdt + meraki header) can be set to the NANDs real
value. The FDT size (which was needed for alignment) can now be
slimmed down as well.

Co-developed-by: Martin Kennedy <hurricos@gmail.com>
Signed-off-by: Martin Kennedy <hurricos@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2021-10-22 21:25:18 +02:00
..
board.d apm821xx: MR24: Change default config of WLAN LED 2021-05-23 15:10:37 +02:00
hotplug.d treewide: remove empty default cases 2020-09-17 12:46:19 +02:00
uci-defaults apm821xx: MX60(W): re-enable + allow bigger future kernels 2021-10-22 21:25:18 +02:00
inittab apm821xx: add support for the apm821xx device target 2016-07-22 09:48:12 +02:00