Maxim Anisimov 8956eb502d ramips: add support for TP-Link TL-WR842N v5 ... TP-Link TL-WR842N v5 are simple N300 router with 5-port FE switch and non-detachable antennas. Its very similar to TP-Link TL-MR3420 V5. Specification: - MT7628N/N (580 MHz) - 64 MB of RAM (DDR2) - 8 MB of FLASH - 2T2R 2.4 GHz - 5x 10/100 Mbps Ethernet - 2x external, non-detachable antennas - USB 2.0 Port - UART (J1) header on PCB (115200 8n1) - 7x LED, 2x button, power input switch Flash instruction: The only way to flash OpenWrt image in wr842nv5 is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.0.225/24 and tftp server. 2. Rename "lede-ramips-mt7628-tplink_tl-wr842n-v5-squashfs-tftp-recovery.bin" to "tp_recovery.bin" and place it in tftp server directory. 3. Connect PC with one of LAN ports, press the reset button, power up the router and keep button pressed for around 6-7 seconds, until device starts downloading the file. 4. Router will download file from server, write it to flash and reboot. Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>		2018-06-16 10:08:51 +02:00
..
board.d	ramips: add support for TP-Link TL-WR842N v5	2018-06-16 10:08:51 +02:00
hotplug.d	ramips: add support for DLINK DWR-921-C1	2018-04-04 08:42:35 +02:00
init.d	treewide: use the generic board_name function	2017-07-15 23:13:34 +02:00
uci-defaults	ramips: use generic board detection for D-Link DAP-1522 A1	2018-02-20 19:25:17 +01:00
diag.sh	ramips: add support for TP-Link TL-WR842N v5	2018-06-16 10:08:51 +02:00
inittab	image / basefiles: make console password configurable	2016-04-18 21:53:07 +02:00