mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 14:13:16 +00:00
c568c6dc09
ALFA Network AP120C-AC is a dual-band ceiling AP, based on Qualcomm IPQ4018 + QCA8075 platform. Specification: - Qualcomm IPQ4018 (717 MHz) - 256 MB of RAM (DDR3) - 16 MB (SPI NOR) + 128 MB (SPI NAND) of flash - 2x Gbps Ethernet, with 802.3af PoE support in one port - 2T2R 2.4/5 GHz (IPQ4018), with ext. FEMs (QFE1952, QFE1922) - 3x U.FL connectors - 1x 1.8 dBi (Bluetooth) and 2x 3/5 dBi dual-band (Wi-Fi) antennas - Atmel/Microchip AT97SC3205T TPM module (I2C bus) - TI CC2540 Bluetooth LE module (USB 2.0 bus) - 4x LED (all driven by GPIO) - 1x button (reset) - 1x USB 2.0 (optional, not installed in indoor version) - DC jack for main power input (12 V) - UART header available on PCB (2.0 mm pitch) Flash instruction: 1. This board uses dual-image feature (128 MB NAND is divided into two 64 MB partitions: 'rootfs1' and 'rootfs2'). 2. Before update, make sure your device is running firmware no older than v1.1 (previous versions have incompatible U-Boot). 3. Use 'factory' image in vendor GUI or for sysupgrade tool, without preserving settings. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> |
||
---|---|---|
.. | ||
070-v4.20-soc-qcom-spm-add-SCM-probe-dependency.patch | ||
071-01-v4.20-ARM-dts-qcom-ipq4019-use-v2-of-the-kpss-bringup-mech.patch | ||
071-02-ipq40xx-Fix-booting-secondary-cores.patch | ||
072-v4.20-ARM-dts-qcom-ipq4019-add-cpu-operating-points-for-cp.patch | ||
073-v4.20-ARM-dts-qcom-ipq4019-fix-cpu0-s-qcom-saw2-reg-value.patch | ||
074-ARM-qcom-Add-IPQ4019-SoC-support.patch | ||
075-dt-bindings-phy-qcom-ipq4019-usb-add-binding-documen.patch | ||
076-phy-qcom-ipq4019-usb-add-driver-for-QCOM-IPQ4019.patch | ||
077-qcom-ipq4019-add-USB-devicetree-nodes.patch | ||
079-v4.20-ARM-dts-qcom-ipq4019-fix-PCI-range.patch | ||
080-ARM-dts-qcom-add-gpio-ranges-property.patch | ||
081-clk-fix-apss-cpu-overclocking.patch | ||
082-v4.20-mtd-spinand-winbond-Add-support-for-W25N01GV.patch | ||
303-spi-nor-enable-4B-opcodes-for-mx25l25635f.patch | ||
700-net-add-qualcomm-mdio-and-phy.patch | ||
701-dts-ipq4019-add-mdio-node.patch | ||
702-dts-ipq4019-add-PHY-switch-nodes.patch | ||
703-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch | ||
710-net-add-qualcomm-essedma-ethernet-driver.patch | ||
711-dts-ipq4019-add-ethernet-essedma-node.patch | ||
712-mr33-essedma.patch | ||
713-essedma-alloc-skb-ip-align.patch | ||
850-soc-add-qualcomm-syscon.patch | ||
900-dts-ipq4019-ap-dk01.1.patch | ||
901-arm-boot-add-dts-files.patch | ||
997-device_tree_cmdline.patch |