openwrt/package/boot
Chuncheng Chen 502916468e
Some checks failed
Build Kernel / Build all affected Kernels (push) Waiting to run
Build all core packages / Build all core packages for selected target (push) Waiting to run
Coverity scan build / Coverity x86/64 build (push) Has been cancelled
ramips: add support for ASUS 4G-AX56
Specifications:
- Device: ASUS 4g-AX56
- SoC: MT7621AT
- Flash: 128MB
- RAM: 512MB
- Switch: 1 WAN, 4 LAN (10/100/1000 Mbps)
- WiFi: MT7905 2x2 2.4G + MT7975 2x2 5G
- LTE : Fibocom FG621-EA
- LEDs: 1x POWER (white, configurable)
	1x 2.4G (white, not configurable)
	1x 5G (white, not configurable)
        1x WAN (white, not configurable)
        1x 3G/4G (white, not configurable)
	3x signal (white, not configurable)

Flash by U-Boot TFTP method:
- Configure your PC with IP 192.168.0.2
- Set up TFTP server and put the factory.bin image on your PC
- Connect serial port(rate:115200) and turn on AP, then interrupt "U-Boot Boot Menu" by hitting any key
   Select "2. Upgrade firmware"
   Press enter when show "Run firmware after upgrading? (Y/n):"
   Select 0 for TFTP method
   Input U-Boot's IP address: 192.168.0.1
   Input TFTP server's IP address: 192.168.0.2
   Input IP netmask: 255.255.255.0
   Input file name: openwrt-ramips-mt7621-asus_4g-ax56-squashfs-factory.bin
- Restart AP aftre see the log "Firmware upgrade completed!"

Notice:
- LTE module is disable after flash openwrt image so you must active LTE by following two AT command
   echo -e "AT+GTAUTOCONNECT=1\r\n" > /dev/ttyUSB0
   echo -e "AT+GTRNDIS=1,1\r\n" > /dev/ttyUSB0
- After finish AT command once, you don't need to input command later even if reboot/restore default

Signed-off-by: Chuncheng Chen <ccchen1984@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16752
Signed-off-by: John Crispin <john@phrozen.org>
2024-12-13 15:29:04 +01:00
..
apex
arm-trusted-firmware-bcm63xx
arm-trusted-firmware-mediatek arm-trusted-firmware-mediatek: add mt7986-spim-nand-ddr3 build 2024-11-30 18:36:05 +01:00
arm-trusted-firmware-mvebu
arm-trusted-firmware-rockchip
arm-trusted-firmware-stm32 arm-trusted-firmware-stm32: add ATF for stm32 boards 2024-11-23 15:53:21 +01:00
arm-trusted-firmware-sunxi
arm-trusted-firmware-tools
at91bootstrap
fconfig
grub2
imx-bootlets
kexec-tools
kobs-ng
mt7623n-preloader
opensbi
optee-os-stm32 optee-os-stm32: add OP-TEE for stm32 boards 2024-11-23 15:53:21 +01:00
rkbin
tfa-layerscape tfa-layerscape: fix fiptool's build 2024-09-24 12:29:06 +02:00
uboot-armsr
uboot-at91
uboot-ath79 uboot-ath79: refresh patches 2024-10-19 17:56:46 +02:00
uboot-bcm53xx
uboot-bcm4908
uboot-bmips
uboot-d1
uboot-envtools ramips: add support for ASUS 4G-AX56 2024-12-13 15:29:04 +01:00
uboot-fritz4040
uboot-imx
uboot-kirkwood uboot-kirkwood: fix compilation with GCC14 2024-09-25 22:50:09 +02:00
uboot-lantiq
uboot-layerscape
uboot-mediatek uboot-mediatek: increase USB probe delay on OpenWrt One 2024-12-02 13:55:36 +01:00
uboot-mvebu uboot-mvebu: update to version 2024.10 2024-10-19 22:54:12 +02:00
uboot-mxs
uboot-omap
uboot-rockchip uboot-rockchip: add support for NanoPi R3S 2024-10-27 14:57:51 +01:00
uboot-sifiveu
uboot-stm32 uboot-stm32: add U-Boot for stm32 boards 2024-11-23 15:53:21 +01:00
uboot-sunxi
uboot-tegra
uboot-zynq