mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 14:37:57 +00:00
28dd52b079
On the stock Meraki Firmare for the MR12/MR16, a chunk of SPI space after u-boot-env is used to store the boards Mac address. Sadly as this was removed on any device already on OpenWRT/LEDE, moving forward a new, 64k partition named "mac" will be used to store the mac address for the device (which is the minimum size). This allows users to properly set the correct MAC, without editing the ART partition (which holds the same MAC for all devices). The reason the space is taken from kernel instead of rootfs is currently kernels are only 1.3MB, so that way we can leave the current rootfs space alone for users who fully utilize the available storage space. Once this partition is added to a device, you can set your MAC doing the following: mtd erase mac echo -n -e '\x00\x18\x0a\x33\x44\x55' > /dev/mtd5 sync && reboot Where 00:18:0a:33:44:55 is your MAC address. This was tested, and confirmed working on both the MR12 and MR16. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
119 lines
2.9 KiB
C
119 lines
2.9 KiB
C
/*
|
|
* Cisco Meraki MR16 board support
|
|
*
|
|
* Copyright (C) 2015 Chris Blake <chrisrblake93@gmail.com>
|
|
*
|
|
* Based on Atheros AP96 board support configuration
|
|
*
|
|
* Copyright (C) 2009 Marco Porsch
|
|
* Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
|
|
* Copyright (C) 2010 Atheros Communications
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/platform_device.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <asm/mach-ath79/ath79.h>
|
|
|
|
#include "dev-ap9x-pci.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
#include "machtypes.h"
|
|
|
|
#define MR16_GPIO_LED_W4_GREEN 3
|
|
#define MR16_GPIO_LED_W3_GREEN 2
|
|
#define MR16_GPIO_LED_W2_GREEN 1
|
|
#define MR16_GPIO_LED_W1_GREEN 0
|
|
|
|
#define MR16_GPIO_LED_WAN 4
|
|
|
|
#define MR16_GPIO_LED_POWER_ORANGE 5
|
|
#define MR16_GPIO_LED_POWER_GREEN 6
|
|
|
|
#define MR16_GPIO_BTN_RESET 7
|
|
#define MR16_KEYS_POLL_INTERVAL 20 /* msecs */
|
|
#define MR16_KEYS_DEBOUNCE_INTERVAL (3 * MR16_KEYS_POLL_INTERVAL)
|
|
|
|
#define MR16_WAN_PHYMASK BIT(0)
|
|
|
|
#define MR16_CALDATA0_OFFSET 0x21000
|
|
#define MR16_CALDATA1_OFFSET 0x25000
|
|
|
|
static struct gpio_led MR16_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "mr16:green:wan",
|
|
.gpio = MR16_GPIO_LED_WAN,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "mr16:orange:power",
|
|
.gpio = MR16_GPIO_LED_POWER_ORANGE,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "mr16:green:power",
|
|
.gpio = MR16_GPIO_LED_POWER_GREEN,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "mr16:green:wifi4",
|
|
.gpio = MR16_GPIO_LED_W4_GREEN,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "mr16:green:wifi3",
|
|
.gpio = MR16_GPIO_LED_W3_GREEN,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "mr16:green:wifi2",
|
|
.gpio = MR16_GPIO_LED_W2_GREEN,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "mr16:green:wifi1",
|
|
.gpio = MR16_GPIO_LED_W1_GREEN,
|
|
.active_low = 1,
|
|
}
|
|
};
|
|
|
|
static struct gpio_keys_button MR16_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "reset",
|
|
.type = EV_KEY,
|
|
.code = KEY_RESTART,
|
|
.debounce_interval = MR16_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = MR16_GPIO_BTN_RESET,
|
|
.active_low = 1,
|
|
}
|
|
};
|
|
|
|
static void __init MR16_setup(void)
|
|
{
|
|
u8 *mac = (u8 *) KSEG1ADDR(0xbffd0000);
|
|
u8 wlan0_mac[ETH_ALEN];
|
|
u8 wlan1_mac[ETH_ALEN];
|
|
|
|
ath79_register_mdio(0,0x0);
|
|
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
|
ath79_eth0_data.phy_mask = MR16_WAN_PHYMASK;
|
|
ath79_register_eth(0);
|
|
|
|
ath79_register_m25p80(NULL);
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(MR16_leds_gpio),
|
|
MR16_leds_gpio);
|
|
ath79_register_gpio_keys_polled(-1, MR16_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(MR16_gpio_keys),
|
|
MR16_gpio_keys);
|
|
|
|
ath79_init_mac(wlan0_mac, mac, 1);
|
|
ath79_init_mac(wlan1_mac, mac, 2);
|
|
ap94_pci_init(mac + MR16_CALDATA0_OFFSET, wlan0_mac,
|
|
mac + MR16_CALDATA1_OFFSET, wlan1_mac);
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_MR16, "MR16", "Meraki MR16", MR16_setup);
|