mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 23:12:32 +00:00
642c88714c
ath79/tiny kernel config has CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y from commit05d35403b2Because of this, these changes are required for 2 reasons: 1. Senao devices in ath79/tiny with a 'failsafe' partition and the tar.gz sysupgrade platform and a flash chip that supports 4k sectors will fail to reboot to openwrt after a sysupgrade. the stored checksum is made with the 64k blocksize length of the image to be flashed, and the actual checksum changes after flashing due to JFFS2 space being formatted within the length of the rootfs from the image example: 0x440000 length of kernel + rootfs (from sysupgrade.bin) 0x439000 offset of rootfs_data (from kernel log) 2. for boards with flash chips that support 4k sectors: saving configuration over sysupgrade is not possible because sysupgrade.tgz is appended at a 64k boundary and the mtd parser starts JFFS2 at a 4k boundary. for boards with flash chips that do not support 4k sectors: partitioning with 4k boundaries causes a boot loop from the mtd parser not finding kernel and rootfs. Also: Some of the Senao boards that belong in ath79/tiny, for example ENH202, have a flash chip that does not support 4k sectors (no SECT_4K symbol in upstream source). Because of this, partitioning must be different for these devices depending on the flash chip model detected by the kernel. Therefore: this creates 2 DTSI files to replace the single one with 64k partitioning for 4k and 64k partitioning respectively. Signed-off-by: Michael Pratt <mcpratt@pm.me> (cherry picked from commita58cb22bbe)
82 lines
2.0 KiB
Makefile
82 lines
2.0 KiB
Makefile
include ./common-buffalo.mk
|
|
include ./common-senao.mk
|
|
|
|
define Device/buffalo_whr-g301n
|
|
$(Device/buffalo_common)
|
|
SOC := ar7240
|
|
DEVICE_MODEL := WHR-G301N
|
|
BUFFALO_PRODUCT := WHR-G301N
|
|
IMAGE_SIZE := 3712k
|
|
SUPPORTED_DEVICES += whr-g301n
|
|
DEFAULT := n
|
|
endef
|
|
TARGET_DEVICES += buffalo_whr-g301n
|
|
|
|
define Device/dlink_dir-615-e4
|
|
SOC := ar7240
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DIR-615
|
|
DEVICE_VARIANT := E4
|
|
IMAGE_SIZE := 3776k
|
|
FACTORY_IMAGE_SIZE := 3456k
|
|
IMAGES += factory.bin
|
|
IMAGE/default := append-kernel | append-rootfs | pad-rootfs
|
|
IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | \
|
|
check-size
|
|
IMAGE/factory.bin := $$(IMAGE/default) | \
|
|
check-size $$$$(FACTORY_IMAGE_SIZE) | pad-to $$$$(FACTORY_IMAGE_SIZE) | \
|
|
append-string "AP99-AR7240-RT-091105-05"
|
|
SUPPORTED_DEVICES += dir-615-e4
|
|
DEFAULT := n
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-615-e4
|
|
|
|
define Device/engenius_eap350-v1
|
|
$(Device/senao_loader_okli)
|
|
BLOCKSIZE := 4k
|
|
SOC := ar7242
|
|
DEVICE_VENDOR := EnGenius
|
|
DEVICE_MODEL := EAP350
|
|
DEVICE_VARIANT := v1
|
|
IMAGE_SIZE := 4928k
|
|
LOADER_FLASH_OFFS := 0x1a0000
|
|
SENAO_IMGNAME := senao-eap350
|
|
endef
|
|
TARGET_DEVICES += engenius_eap350-v1
|
|
|
|
define Device/engenius_ecb350-v1
|
|
$(Device/senao_loader_okli)
|
|
BLOCKSIZE := 4k
|
|
SOC := ar7242
|
|
DEVICE_VENDOR := EnGenius
|
|
DEVICE_MODEL := ECB350
|
|
DEVICE_VARIANT := v1
|
|
IMAGE_SIZE := 4928k
|
|
LOADER_FLASH_OFFS := 0x1a0000
|
|
SENAO_IMGNAME := senao-ecb350
|
|
endef
|
|
TARGET_DEVICES += engenius_ecb350-v1
|
|
|
|
define Device/engenius_enh202-v1
|
|
$(Device/senao_loader_okli)
|
|
SOC := ar7240
|
|
DEVICE_VENDOR := EnGenius
|
|
DEVICE_MODEL := ENH202
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_PACKAGES := rssileds
|
|
IMAGE_SIZE := 4928k
|
|
LOADER_FLASH_OFFS := 0x1a0000
|
|
SENAO_IMGNAME := senao-enh202
|
|
endef
|
|
TARGET_DEVICES += engenius_enh202-v1
|
|
|
|
define Device/pqi_air-pen
|
|
SOC := ar9330
|
|
DEVICE_VENDOR := PQI
|
|
DEVICE_MODEL := Air-Pen
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
IMAGE_SIZE := 7680k
|
|
SUPPORTED_DEVICES += pqi-air-pen
|
|
endef
|
|
TARGET_DEVICES += pqi_air-pen
|