openwrt/target/linux/ramips
John Crispin dcae3723fd ramips: add support for STORYLiNK SAP-G3200U3
STORYLiNK SAP-G3200U3 is an AC1200 router based on MT7621AT+MT7602EN+MT7612EN.
It has 128MB DDR3, 8MB NOR FLASH, 5-port Gbps switch and 1x USB 3.0.

The following patch adds support for this device.

Tested and working:
* ethernet
* both WiFi radios
* USB 3.0
* buttons
* ethernet switch and USB diag LEDs
* UART
* GPIOs

Tested and not working:
* LEDs for WiFi radios (connected with WiFi chips, not supported in mt76?)
* failsafe mode (known problem, needs workaround like other MTK based devices)

More information in Wiki: http://wiki.openwrt.org/toh/storylink/sap-g3200u3

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

SVN-Revision: 46454
2015-07-24 09:09:22 +00:00
..
base-files ramips: add support for STORYLiNK SAP-G3200U3 2015-07-24 09:09:22 +00:00
dts ramips: add support for STORYLiNK SAP-G3200U3 2015-07-24 09:09:22 +00:00
files ramips: collect rx related members to fe_rx_ring struct 2015-07-10 19:41:48 +00:00
image ramips: add support for STORYLiNK SAP-G3200U3 2015-07-24 09:09:22 +00:00
mt7620 ramips: diable ill_acc driver by default 2015-05-27 20:02:04 +00:00
mt7621 ramips: add support for STORYLiNK SAP-G3200U3 2015-07-24 09:09:22 +00:00
mt7628 ramips: diable ill_acc driver by default 2015-05-27 20:02:04 +00:00
patches-3.18 kernel: update 3.18 to 3.18.17 2015-06-30 23:26:09 +00:00
rt288x ramips: diable ill_acc driver by default 2015-05-27 20:02:04 +00:00
rt305x ramips: add support for Planex MZK-DP150N 2015-07-17 12:51:08 +00:00
rt3883 ramips: diable ill_acc driver by default 2015-05-27 20:02:04 +00:00
base-files.mk ramips: remove default network configuration, and generate that from uci-defaults 2011-12-01 22:48:51 +00:00
Makefile ralink: bump to v3.18 2015-02-19 14:04:47 +00:00
modules.mk ralink: MT7621 add i2c controller driver 2015-03-12 10:06:17 +00:00