mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-30 16:14:12 +00:00
886f524c6b
Not all versions of ESPRESSObin require SD card, but can be booted from the internal emmc flash (mmc dev 1) instead. Add a simple check in the bootscript to see which mmc device is detected and boot from it using mmcdev variable. Tested-by: Tomasz Maciej Nowak <tomek_n@o2.pl> Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr> (cherry picked from commit 008b41b9b0ddd4c5c877a769a85d27eb9c4e21a4)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
This is the buildsystem for the OpenWrt Linux distribution.
To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.
You need gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.
1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default
2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/
3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.
4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.
Sunshine!
Your OpenWrt Community
http://www.openwrt.org