openwrt/target/linux/ramips/dts/mt7621_dlink_dap-x1860-a1.dts
Sebastian Schaper 3c31f6b521 ramips: add support for D-Link DAP-X1860 A1
The DAP-X1860 is a wall-plug AX1800 repeater.

Specifications:
- MT7621, 256 MiB RAM, 128 MiB SPI NAND
- MT7915 + MT7975 2x2 802.11ax (DBDC)
- Ethernet: 1 port 10/100/1000
- LED RSSI bargraph (2x green, 1x red/orange), status
  and RSSI LEDs are incorrectly populated red/orange
  (should be red/green according to documentation)

Installation:
- Keep reset button pressed during plug-in
- Web Recovery Updater is at 192.168.0.50
- Upload factory.bin, confirm flashing
  (seems to work best with Chromium-based browsers)

Revert to OEM firmware:
- tar -xvf DAP-X1860_RevA_Firmware_101b94.bin
- openssl enc -d -md md5 -aes-256-cbc -in FWImage.st2 \
  -out FWImage.st1 -k MB0dBx62oXJXDvt12lETWQ==
- tar -xvf FWImage.st1
- flash kernel_DAP-X1860.bin via Recovery

Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
2023-01-07 17:56:10 +01:00

198 lines
3.1 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "dlink,dap-x1860-a1", "mediatek,mt7621-soc";
model = "D-Link DAP-X1860 A1";
chosen {
bootargs = "console=ttyS0,115200";
};
aliases {
label-mac-device = &gmac0;
led-boot = &led_power_orange;
led-failsafe = &led_power_red;
led-running = &led_power_orange;
led-upgrade = &led_power_red;
};
keys {
compatible = "gpio-keys";
wps {
label = "wps";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
led_power_red: power_red {
label = "red:power";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
led_power_orange: power_orange {
label = "orange:power";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
default-state = "on";
};
rssihigh {
label = "green:rssihigh";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
};
rssimedium {
label = "green:rssimedium";
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
};
rssilow_orange {
label = "orange:rssilow";
gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
};
rssilow_green {
label = "green:rssilow";
gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
};
};
virtual_flash {
compatible = "mtd-concat";
devices = <&fwconcat0 &fwconcat1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "ubi";
reg = <0x0 0x0>;
};
};
};
};
&nand {
status = "okay";
mediatek,nmbm;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "bootloader";
reg = <0x0 0x80000>;
read-only;
};
partition@80000 {
label = "config";
reg = <0x80000 0x80000>;
read-only;
};
factory: partition@100000 {
label = "factory";
reg = <0x100000 0x80000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_factory_4: macaddr@4 {
reg = <0x4 0x6>;
};
};
partition@180000 {
label = "kernel";
reg = <0x180000 0x0800000>;
};
fwconcat0: partition@980000 {
label = "fwconcat0";
reg = <0x980000 0x2c00000>;
};
partition@3580000 {
label = "manufacture";
reg = <0x3580000 0x400000>;
read-only;
};
partition@3980000 {
label = "storage";
reg = <0x3980000 0x680000>;
read-only;
};
fwconcat1: partition@4000000 {
label = "fwconcat1";
reg = <0x4000000 0x3800000>;
};
};
};
&pcie {
status = "okay";
};
&pcie1 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x0>;
mediatek,disable-radar-background;
};
};
&ethernet {
pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
};
&gmac0 {
nvmem-cells = <&macaddr_factory_4>;
nvmem-cell-names = "mac-address";
};
&switch0 {
gpio-controller;
#gpio-cells = <2>;
ports {
port@0 {
status = "okay";
label = "lan";
};
};
};
&state_default {
gpio {
groups = "uart2";
function = "gpio";
};
};