mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 06:33:41 +00:00
f577cb25c0
The following patches were dropped because they are already applied
upstream:
- 0038-MIPS-lantiq-fpi-on-ar9.patch
- 0039-MIPS-lantiq-initialize-usb-on-boot.patch
- 0042-USB-DWC2-big-endian-support.patch
- 0043-gpio-stp-xway-fix-phy-mask.patch
All other patches were simply refreshed, except the following:
- 0001-MIPS-lantiq-add-pcie-driver.patch
Changes to arch/mips/lantiq/xway/sysctrl.c (these changes disabled
some PMU gates for the vrx200 / VR9 SoCs) were removed since the
upstream kernel disables unused PMU gates automatically (since
95135bfa7ead1becc2879230f72583dde2b71a0c
"MIPS: Lantiq: Deactivate most of the devices by default").
- 0025-NET-MIPS-lantiq-adds-xrx200-net.patch
Since OpenWrt commit 55ba20afcc drivers
should use of_get_mac_address(). of_get_mac_address_mtd is not
available for drivers anymore since it's called automatically within
of_get_mac_address().
- 0028-NET-lantiq-various-etop-fixes.patch
Same changes as in 0025-NET-MIPS-lantiq-adds-xrx200-net.patch
While refreshing the kernel configuration SPI support had to be moved to
config-4.4 because otherwise M25P80 was disabled.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 48307
29 lines
989 B
Diff
29 lines
989 B
Diff
From 57b588c950b7e04e0f22393ad439299ba4fda9c3 Mon Sep 17 00:00:00 2001
|
|
From: John Crispin <blogic@openwrt.org>
|
|
Date: Thu, 26 Nov 2015 11:00:09 +0100
|
|
Subject: [PATCH] pinctrl/lantiq: Fix GPIO Setup of GPIO Port3
|
|
|
|
Some special handling of GPIO Port 3 is needed because of
|
|
some hardware thingofabob.
|
|
|
|
Signed-off-by: John Crispin <blogic@openwrt.org>
|
|
Signed-off-by: Martin Schiller <mschiller@tdt.de>
|
|
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
---
|
|
drivers/pinctrl/pinctrl-xway.c | 4 ++++
|
|
1 file changed, 4 insertions(+)
|
|
|
|
--- a/drivers/pinctrl/pinctrl-xway.c
|
|
+++ b/drivers/pinctrl/pinctrl-xway.c
|
|
@@ -1570,6 +1570,10 @@ static int xway_gpio_dir_out(struct gpio
|
|
{
|
|
struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev);
|
|
|
|
+ if (PORT(pin) == PORT3)
|
|
+ gpio_setbit(info->membase[0], GPIO3_OD, PORT_PIN(pin));
|
|
+ else
|
|
+ gpio_setbit(info->membase[0], GPIO_OD(pin), PORT_PIN(pin));
|
|
gpio_setbit(info->membase[0], GPIO_DIR(pin), PORT_PIN(pin));
|
|
xway_gpio_set(chip, pin, val);
|
|
|