mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-24 07:46:48 +00:00
f5919b65d4
Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
98 lines
3.5 KiB
Diff
98 lines
3.5 KiB
Diff
From 3c258618cbc0cddb7076b61a08755aa4f73d27db Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.org>
|
|
Date: Sun, 15 Apr 2018 10:36:15 +0100
|
|
Subject: [PATCH 274/454] overlays: Add ds1621 to the i2c-sensor overlay
|
|
|
|
The ds1621 enables the Dallas Semiconductors DS1621 temperature
|
|
sensor.
|
|
|
|
See: https://github.com/raspberrypi/linux/issues/2509
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
|
|
---
|
|
arch/arm/boot/dts/overlays/README | 15 +++++++++------
|
|
.../boot/dts/overlays/i2c-sensor-overlay.dts | 19 ++++++++++++++++++-
|
|
2 files changed, 27 insertions(+), 7 deletions(-)
|
|
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -821,8 +821,8 @@ Name: i2c-sensor
|
|
Info: Adds support for a number of I2C barometric pressure and temperature
|
|
sensors on i2c_arm
|
|
Load: dtoverlay=i2c-sensor,<param>=<val>
|
|
-Params: addr Set the address for the BME280, BMP280, TMP102,
|
|
- HDC100X, LM75 or SHT3x
|
|
+Params: addr Set the address for the BME280, BMP280, DS1621,
|
|
+ HDC100X, LM75, SHT3x or TMP102
|
|
|
|
bme280 Select the Bosch Sensortronic BME280
|
|
Valid addresses 0x76-0x77, default 0x76
|
|
@@ -834,6 +834,9 @@ Params: addr Set the
|
|
bmp280 Select the Bosch Sensortronic BMP280
|
|
Valid addresses 0x76-0x77, default 0x76
|
|
|
|
+ ds1621 Select the Dallas Semiconductors DS1621 temp
|
|
+ sensor. Valid addresses 0x48-9x4f, default 0x48
|
|
+
|
|
hdc100x Select the Texas Instruments HDC100x temp sensor
|
|
Valid addresses 0x40-0x43, default 0x40
|
|
|
|
@@ -844,6 +847,10 @@ Params: addr Set the
|
|
|
|
lm75addr Deprecated - use addr parameter instead
|
|
|
|
+ sht3x Select the Sensiron SHT3x temperature and
|
|
+ humidity sensor. Valid addresses 0x44-0x45,
|
|
+ default 0x44
|
|
+
|
|
si7020 Select the Silicon Labs Si7013/20/21 humidity/
|
|
temperature sensor
|
|
|
|
@@ -856,10 +863,6 @@ Params: addr Set the
|
|
veml6070 Select the Vishay VEML6070 ultraviolet light
|
|
sensor
|
|
|
|
- sht3x Select the Sensiron SHT3x temperature and
|
|
- humidity sensor. Valid addresses 0x44-0x45,
|
|
- default 0x44
|
|
-
|
|
|
|
Name: i2c0-bcm2708
|
|
Info: Enable the i2c_bcm2708 driver for the i2c0 bus. Not all pin combinations
|
|
--- a/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts
|
|
@@ -186,9 +186,25 @@
|
|
};
|
|
};
|
|
|
|
+ fragment@12 {
|
|
+ target = <&i2c_arm>;
|
|
+ __dormant__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ status = "okay";
|
|
+
|
|
+ ds1621: ds1621@48 {
|
|
+ compatible = "ds1621";
|
|
+ reg = <0x48>;
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
__overrides__ {
|
|
addr = <&bme280>,"reg:0", <&bmp280>,"reg:0", <&tmp102>,"reg:0",
|
|
- <&lm75>,"reg:0", <&hdc100x>,"reg:0", <&sht3x>,"reg:0";
|
|
+ <&lm75>,"reg:0", <&hdc100x>,"reg:0", <&sht3x>,"reg:0",
|
|
+ <&ds1621>,"reg:0";
|
|
bme280 = <0>,"+0";
|
|
bmp085 = <0>,"+1";
|
|
bmp180 = <0>,"+2";
|
|
@@ -202,5 +218,6 @@
|
|
tsl4531 = <0>,"+9";
|
|
veml6070 = <0>,"+10";
|
|
sht3x = <0>,"+11";
|
|
+ ds1621 = <0>,"+12";
|
|
};
|
|
};
|