openwrt/target/linux/bcm27xx/patches-5.15/950-0715-drm-vc4-Convert-vc4_dsi-to-using-a-bridge-instead-of.patch
Álvaro Fernández Rojas 20ea6adbf1 bcm27xx: add support for linux v5.15
Build system: x86_64
Build-tested: bcm2708, bcm2709, bcm2710, bcm2711
Run-tested: bcm2708/RPiB+, bcm2709/RPi3B, bcm2710/RPi3B, bcm2711/RPi4B

Signed-off-by: Marty Jones <mj8263788@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2022-05-17 15:11:22 +02:00

265 lines
8.8 KiB
Diff

From 3e6793632310f9991b75c3095a9795b6a8d1d859 Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
Date: Wed, 15 Dec 2021 17:57:45 +0000
Subject: [PATCH] drm/vc4: Convert vc4_dsi to using a bridge instead of
encoder.
Remove the encoder functions, and create a bridge attached to
this dumb encoder which implements the same functionality.
As a bridge has state which an encoder doesn't, we need to
add the state management functions as well.
As there is no bridge atomic_mode_set, move the initialisation
code that was in mode_set into _pre_enable.
The code to actually enable and disable sending video are split
from the general control into _enable and _disable.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
drivers/gpu/drm/vc4/vc4_dsi.c | 124 ++++++++++++++++++++++++----------
1 file changed, 90 insertions(+), 34 deletions(-)
--- a/drivers/gpu/drm/vc4/vc4_dsi.c
+++ b/drivers/gpu/drm/vc4/vc4_dsi.c
@@ -554,6 +554,7 @@ struct vc4_dsi {
struct mipi_dsi_host dsi_host;
struct drm_encoder *encoder;
struct drm_bridge *out_bridge;
+ struct drm_bridge bridge;
void __iomem *regs;
@@ -655,6 +656,12 @@ to_vc4_dsi_encoder(struct drm_encoder *e
return container_of(encoder, struct vc4_dsi_encoder, base.base);
}
+static inline struct vc4_dsi *
+bridge_to_vc4_dsi(struct drm_bridge *bridge)
+{
+ return container_of(bridge, struct vc4_dsi, bridge);
+}
+
static const struct debugfs_reg32 dsi0_regs[] = {
VC4_REG32(DSI0_CTRL),
VC4_REG32(DSI0_STAT),
@@ -792,11 +799,21 @@ dsi_esc_timing(u32 ns)
return DIV_ROUND_UP(ns, ESC_TIME_NS);
}
-static void vc4_dsi_encoder_disable(struct drm_encoder *encoder,
- struct drm_atomic_state *state)
+static void vc4_dsi_bridge_disable(struct drm_bridge *bridge,
+ struct drm_bridge_state *state)
+{
+ struct vc4_dsi *dsi = bridge_to_vc4_dsi(bridge);
+ u32 disp0_ctrl;
+
+ disp0_ctrl = DSI_PORT_READ(DISP0_CTRL);
+ disp0_ctrl &= ~DSI_DISP0_ENABLE;
+ DSI_PORT_WRITE(DISP0_CTRL, disp0_ctrl);
+}
+
+static void vc4_dsi_bridge_post_disable(struct drm_bridge *bridge,
+ struct drm_bridge_state *state)
{
- struct vc4_dsi_encoder *vc4_encoder = to_vc4_dsi_encoder(encoder);
- struct vc4_dsi *dsi = vc4_encoder->dsi;
+ struct vc4_dsi *dsi = bridge_to_vc4_dsi(bridge);
struct device *dev = &dsi->pdev->dev;
vc4_dsi_ulps(dsi, true);
@@ -821,12 +838,11 @@ static void vc4_dsi_encoder_disable(stru
* higher-than-expected clock rate to the panel, but that's what the
* firmware does too.
*/
-static bool vc4_dsi_encoder_mode_fixup(struct drm_encoder *encoder,
- const struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
+static bool vc4_dsi_bridge_mode_fixup(struct drm_bridge *bridge,
+ const struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
{
- struct vc4_dsi_encoder *vc4_encoder = to_vc4_dsi_encoder(encoder);
- struct vc4_dsi *dsi = vc4_encoder->dsi;
+ struct vc4_dsi *dsi = bridge_to_vc4_dsi(bridge);
struct clk *phy_parent = clk_get_parent(dsi->pll_phy_clock);
unsigned long parent_rate = clk_get_rate(phy_parent);
unsigned long pixel_clock_hz = mode->clock * 1000;
@@ -858,16 +874,18 @@ static bool vc4_dsi_encoder_mode_fixup(s
return true;
}
-static void vc4_dsi_encoder_mode_set(struct drm_encoder *encoder,
- struct drm_crtc_state *crtc_state,
- struct drm_connector_state *conn_state)
+static void vc4_dsi_bridge_pre_enable(struct drm_bridge *bridge,
+ struct drm_bridge_state *old_state)
{
- struct vc4_dsi_encoder *vc4_encoder = to_vc4_dsi_encoder(encoder);
- struct vc4_dsi *dsi = vc4_encoder->dsi;
+ struct drm_atomic_state *state = old_state->base.state;
+ struct vc4_dsi *dsi = bridge_to_vc4_dsi(bridge);
+ const struct drm_crtc_state *crtc_state;
struct device *dev = &dsi->pdev->dev;
const struct drm_display_mode *mode;
+ struct drm_connector *connector;
bool debug_dump_regs = false;
unsigned long hs_clock;
+ struct drm_crtc *crtc;
u32 ui_ns;
/* Minimum LP state duration in escape clock cycles. */
u32 lpx = dsi_esc_timing(60);
@@ -888,6 +906,14 @@ static void vc4_dsi_encoder_mode_set(str
drm_print_regset32(&p, &dsi->regset);
}
+ /*
+ * Retrieve the CRTC adjusted mode. This requires a little dance to go
+ * from the bridge to the encoder, to the connector and to the CRTC.
+ */
+ connector = drm_atomic_get_new_connector_for_encoder(state,
+ bridge->encoder);
+ crtc = drm_atomic_get_new_connector_state(state, connector)->crtc;
+ crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
mode = &crtc_state->adjusted_mode;
pixel_clock_hz = mode->clock * 1000;
@@ -1102,14 +1128,6 @@ static void vc4_dsi_encoder_mode_set(str
~DSI_PORT_BIT(PHY_AFEC0_RESET));
vc4_dsi_ulps(dsi, false);
-}
-
-static void vc4_dsi_encoder_enable(struct drm_encoder *encoder,
- struct drm_atomic_state *state)
-{
- struct vc4_dsi_encoder *vc4_encoder = to_vc4_dsi_encoder(encoder);
- struct vc4_dsi *dsi = vc4_encoder->dsi;
- bool debug_dump_regs = false;
if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
DSI_PORT_WRITE(DISP0_CTRL,
@@ -1118,13 +1136,23 @@ static void vc4_dsi_encoder_enable(struc
VC4_SET_FIELD(dsi->format, DSI_DISP0_PFORMAT) |
VC4_SET_FIELD(DSI_DISP0_LP_STOP_PERFRAME,
DSI_DISP0_LP_STOP_CTRL) |
- DSI_DISP0_ST_END |
- DSI_DISP0_ENABLE);
+ DSI_DISP0_ST_END);
} else {
DSI_PORT_WRITE(DISP0_CTRL,
- DSI_DISP0_COMMAND_MODE |
- DSI_DISP0_ENABLE);
+ DSI_DISP0_COMMAND_MODE);
}
+}
+
+static void vc4_dsi_bridge_enable(struct drm_bridge *bridge,
+ struct drm_bridge_state *old_state)
+{
+ struct vc4_dsi *dsi = bridge_to_vc4_dsi(bridge);
+ bool debug_dump_regs = false;
+ u32 disp0_ctrl;
+
+ disp0_ctrl = DSI_PORT_READ(DISP0_CTRL);
+ disp0_ctrl |= DSI_DISP0_ENABLE;
+ DSI_PORT_WRITE(DISP0_CTRL, disp0_ctrl);
if (debug_dump_regs) {
struct drm_printer p = drm_info_printer(&dsi->pdev->dev);
@@ -1133,6 +1161,16 @@ static void vc4_dsi_encoder_enable(struc
}
}
+static int vc4_dsi_bridge_attach(struct drm_bridge *bridge,
+ enum drm_bridge_attach_flags flags)
+{
+ struct vc4_dsi *dsi = bridge_to_vc4_dsi(bridge);
+
+ /* Attach the panel or bridge to the dsi bridge */
+ return drm_bridge_attach(bridge->encoder, dsi->out_bridge,
+ &dsi->bridge, flags);
+}
+
static ssize_t vc4_dsi_host_transfer(struct mipi_dsi_host *host,
const struct mipi_dsi_msg *msg)
{
@@ -1309,6 +1347,7 @@ static int vc4_dsi_host_attach(struct mi
struct mipi_dsi_device *device)
{
struct vc4_dsi *dsi = host_to_dsi(host);
+ int ret;
dsi->lanes = device->lanes;
dsi->channel = device->channel;
@@ -1343,7 +1382,15 @@ static int vc4_dsi_host_attach(struct mi
return 0;
}
- return component_add(&dsi->pdev->dev, &vc4_dsi_ops);
+ drm_bridge_add(&dsi->bridge);
+
+ ret = component_add(&dsi->pdev->dev, &vc4_dsi_ops);
+ if (ret) {
+ drm_bridge_remove(&dsi->bridge);
+ return ret;
+ }
+
+ return 0;
}
static int vc4_dsi_host_detach(struct mipi_dsi_host *host,
@@ -1352,6 +1399,7 @@ static int vc4_dsi_host_detach(struct mi
struct vc4_dsi *dsi = host_to_dsi(host);
component_del(&dsi->pdev->dev, &vc4_dsi_ops);
+ drm_bridge_remove(&dsi->bridge);
return 0;
}
@@ -1361,11 +1409,16 @@ static const struct mipi_dsi_host_ops vc
.transfer = vc4_dsi_host_transfer,
};
-static const struct drm_encoder_helper_funcs vc4_dsi_encoder_helper_funcs = {
- .atomic_disable = vc4_dsi_encoder_disable,
- .atomic_enable = vc4_dsi_encoder_enable,
- .mode_fixup = vc4_dsi_encoder_mode_fixup,
- .atomic_mode_set = vc4_dsi_encoder_mode_set,
+static const struct drm_bridge_funcs vc4_dsi_bridge_funcs = {
+ .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
+ .atomic_reset = drm_atomic_helper_bridge_reset,
+ .atomic_pre_enable = vc4_dsi_bridge_pre_enable,
+ .atomic_enable = vc4_dsi_bridge_enable,
+ .atomic_disable = vc4_dsi_bridge_disable,
+ .atomic_post_disable = vc4_dsi_bridge_post_disable,
+ .attach = vc4_dsi_bridge_attach,
+ .mode_fixup = vc4_dsi_bridge_mode_fixup,
};
static const struct vc4_dsi_variant bcm2711_dsi1_variant = {
@@ -1691,9 +1744,8 @@ static int vc4_dsi_bind(struct device *d
goto err_free_dma;
drm_simple_encoder_init(drm, dsi->encoder, DRM_MODE_ENCODER_DSI);
- drm_encoder_helper_add(dsi->encoder, &vc4_dsi_encoder_helper_funcs);
- ret = drm_bridge_attach(dsi->encoder, dsi->out_bridge, NULL, 0);
+ ret = drm_bridge_attach(dsi->encoder, &dsi->bridge, NULL, 0);
if (ret) {
dev_err(dev, "bridge attach failed: %d\n", ret);
goto err_free_dma;
@@ -1755,6 +1807,10 @@ static int vc4_dsi_dev_probe(struct plat
return -ENOMEM;
dev_set_drvdata(dev, dsi);
+ dsi->bridge.funcs = &vc4_dsi_bridge_funcs;
+ dsi->bridge.of_node = dev->of_node;
+ dsi->bridge.type = DRM_MODE_CONNECTOR_DSI;
+
dsi->pdev = pdev;
dsi->dsi_host.ops = &vc4_dsi_host_ops;
dsi->dsi_host.dev = dev;