openwrt/target/linux/brcm63xx/patches-3.14/562-board_VR-3025u.patch
Jonas Gorski 862f7fccb0 brcm63xx: use dtb board detection for NB6
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42127
2014-08-11 11:37:17 +00:00

128 lines
2.4 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -4587,6 +4587,116 @@ static struct board_info __initdata boar
.has_ehci0 = 1,
};
+static struct sprom_fixup __initdata vr3025u_fixups[] = {
+ { .offset = 97, .value = 0xfeb3 },
+ { .offset = 98, .value = 0x1618 },
+ { .offset = 99, .value = 0xfab0 },
+ { .offset = 113, .value = 0xfed1 },
+ { .offset = 114, .value = 0x1609 },
+ { .offset = 115, .value = 0xfad9 },
+};
+
+static struct board_info __initdata board_VR3025u = {
+ .name = "96368M-1541N",
+ .expected_cpu_id = 0x6368,
+
+ .has_uart0 = 1,
+ .has_pci = 1,
+ .use_fallback_sprom = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+
+ .has_enetsw = 1,
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "port1",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "port2",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "port3",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "port4",
+ },
+ },
+ },
+
+ .leds = {
+ {
+ .name = "VR-3025u:green:dsl",
+ .gpio = 2,
+ .active_low = 1,
+ },
+ {
+ .name = "VR-3025u:green:inet",
+ .gpio = 5,
+ },
+ {
+ .name = "VR-3025u:green:lan1",
+ .gpio = 6,
+ .active_low = 1,
+ },
+ {
+ .name = "VR-3025u:green:lan2",
+ .gpio = 7,
+ .active_low = 1,
+ },
+ {
+ .name = "VR-3025u:green:lan3",
+ .gpio = 8,
+ .active_low = 1,
+ },
+ {
+ .name = "VR-3025u:green:lan4",
+ .gpio = 9,
+ .active_low = 1,
+ },
+ {
+ .name = "VR-3025u:green:power",
+ .gpio = 22,
+ .default_trigger = "default-on",
+ },
+ {
+ .name = "VR-3025u:red:power",
+ .gpio = 24,
+ },
+ {
+ .name = "VR-3025u:red:inet",
+ .gpio = 31,
+ },
+ },
+
+ .buttons = {
+ {
+ .desc = "reset",
+ .gpio = 34,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ .active_low = 1,
+ },
+ },
+
+ .fallback_sprom = {
+ .type = SPROM_BCM43222,
+ .pci_bus = 0,
+ .pci_dev = 1,
+ .board_fixups = vr3025u_fixups,
+ .num_board_fixups = ARRAY_SIZE(vr3025u_fixups),
+ },
+};
+
static struct b53_platform_data WAP5813n_b53_pdata = {
.alias = "eth0",
};
@@ -5080,6 +5190,7 @@ static const struct board_info __initcon
#ifdef CONFIG_BCM63XX_CPU_6368
&board_96368mvwg,
&board_96368mvngr,
+ &board_VR3025u,
&board_WAP5813n,
#endif
#ifdef CONFIG_BCM63XX_CPU_63268