Joe Mullally 85d581a64b ath79: Move TPLink WPA8630Pv2 to ath79-tiny target ... These devices only have 6MiB available for firmware, which is not enough for recent release images, so move these to the tiny target. Note for users sysupgrading from the previous ath79-generic snapshot images: The tiny target kernel has a 4Kb flash erase block size instead of the generic target's 64kb. This means the JFFS2 overlay partition containing settings must be reformatted with the new block size or else there will be data corruption. To do this, backup your settings before upgrading, then during the sysupgrade, de-select "Keep Settings". On the CLI, use "sysupgrade -n". If you forget to do this and your system becomes unstable after upgrading, you can do this to format the partition and recover: * Reboot * Press RESET when Power LED blinks during boot to enter Failsafe mode * SSH to 192.168.1.1 * Run "firstboot" and reboot Signed-off-by: Joe Mullally <jwmullally@gmail.com> Tested-by: Robert Högberg <robert.hogberg@gmail.com> (cherry picked from commit 44e1e5d153)		2022-04-10 16:26:01 +01:00
..
firmware	ath79: Move TPLink WPA8630Pv2 to ath79-tiny target	2022-04-10 16:26:01 +01:00
ieee80211	ath79: move cal-data extraction to dts for DAP-2695	2021-11-20 21:08:25 +01:00