openwrt/target/linux/bcm27xx/patches-5.10/950-0659-media-i2c-imx477-Extend-driver-to-support-imx378-sen.patch
Álvaro Fernández Rojas 8299d1f057 bcm27xx: add kernel 5.10 support
Rebased RPi foundation patches on linux 5.10.59, removed applied and reverted
patches, wireless patches and defconfig patches.

bcm2708: boot tested on RPi B+ v1.2
bcm2709: boot tested on RPi 4B v1.1 4G
bcm2711: boot tested on RPi 4B v1.1 4G

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-08-21 19:07:07 +02:00

191 lines
5.3 KiB
Diff

From c298f9514f99b9dfde64bb5f07fe09ee8dfdcd48 Mon Sep 17 00:00:00 2001
From: David Plowman <david.plowman@raspberrypi.com>
Date: Tue, 29 Jun 2021 14:43:01 +0100
Subject: [PATCH] media: i2c: imx477: Extend driver to support imx378
sensor
The imx378 sensor is almost identical to the imx477 and can be
supported as a "compatible" sensor with just a few extra register
writes.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
---
drivers/media/i2c/Kconfig | 2 +-
drivers/media/i2c/imx477.c | 68 +++++++++++++++++++++++++++++++++-----
2 files changed, 60 insertions(+), 10 deletions(-)
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -807,7 +807,7 @@ config VIDEO_IMX477
depends on MEDIA_CAMERA_SUPPORT
help
This is a Video4Linux2 sensor driver for the Sony
- IMX477 camera.
+ IMX477 camera. Also supports the Sony IMX378.
To compile this driver as a module, choose M here: the
module will be called imx477.
--- a/drivers/media/i2c/imx477.c
+++ b/drivers/media/i2c/imx477.c
@@ -12,6 +12,7 @@
#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/module.h>
+#include <linux/of_device.h>
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
#include <media/v4l2-ctrls.h>
@@ -26,6 +27,7 @@
/* Chip ID */
#define IMX477_REG_CHIP_ID 0x0016
#define IMX477_CHIP_ID 0x0477
+#define IMX378_CHIP_ID 0x0378
#define IMX477_REG_MODE_SELECT 0x0100
#define IMX477_MODE_STANDBY 0x00
@@ -1069,6 +1071,11 @@ static const char * const imx477_supply_
#define IMX477_XCLR_MIN_DELAY_US 8000
#define IMX477_XCLR_DELAY_RANGE_US 1000
+struct imx477_compatible_data {
+ unsigned int chip_id;
+ struct imx477_reg_list extra_regs;
+};
+
struct imx477 {
struct v4l2_subdev sd;
struct media_pad pad[NUM_PADS];
@@ -1107,6 +1114,9 @@ struct imx477 {
/* Current long exposure factor in use. Set through V4L2_CID_VBLANK */
unsigned int long_exp_shift;
+
+ /* Any extra information related to different compatible sensors */
+ const struct imx477_compatible_data *compatible_data;
};
static inline struct imx477 *to_imx477(struct v4l2_subdev *_sd)
@@ -1673,11 +1683,18 @@ static int imx477_start_streaming(struct
{
struct i2c_client *client = v4l2_get_subdevdata(&imx477->sd);
const struct imx477_reg_list *reg_list;
+ const struct imx477_reg_list *extra_regs;
int ret;
if (!imx477->common_regs_written) {
ret = imx477_write_regs(imx477, mode_common_regs,
ARRAY_SIZE(mode_common_regs));
+ if (!ret) {
+ extra_regs = &imx477->compatible_data->extra_regs;
+ ret = imx477_write_regs(imx477, extra_regs->regs,
+ extra_regs->num_of_regs);
+ }
+
if (ret) {
dev_err(&client->dev, "%s failed to set common settings\n",
__func__);
@@ -1863,7 +1880,7 @@ static int imx477_get_regulators(struct
}
/* Verify chip ID */
-static int imx477_identify_module(struct imx477 *imx477)
+static int imx477_identify_module(struct imx477 *imx477, u32 expected_id)
{
struct i2c_client *client = v4l2_get_subdevdata(&imx477->sd);
int ret;
@@ -1873,16 +1890,18 @@ static int imx477_identify_module(struct
IMX477_REG_VALUE_16BIT, &val);
if (ret) {
dev_err(&client->dev, "failed to read chip id %x, with error %d\n",
- IMX477_CHIP_ID, ret);
+ expected_id, ret);
return ret;
}
- if (val != IMX477_CHIP_ID) {
+ if (val != expected_id) {
dev_err(&client->dev, "chip id mismatch: %x!=%x\n",
- IMX477_CHIP_ID, val);
+ expected_id, val);
return -EIO;
}
+ dev_info(&client->dev, "Device found is imx%x\n", val);
+
return 0;
}
@@ -2078,10 +2097,39 @@ error_out:
return ret;
}
+static const struct imx477_compatible_data imx477_compatible = {
+ .chip_id = IMX477_CHIP_ID,
+ .extra_regs = {
+ .num_of_regs = 0,
+ .regs = NULL
+ }
+};
+
+static const struct imx477_reg imx378_regs[] = {
+ {0x3e35, 0x01},
+ {0x4421, 0x08},
+ {0x3ff9, 0x00},
+};
+
+static const struct imx477_compatible_data imx378_compatible = {
+ .chip_id = IMX378_CHIP_ID,
+ .extra_regs = {
+ .num_of_regs = ARRAY_SIZE(imx378_regs),
+ .regs = imx378_regs
+ }
+};
+
+static const struct of_device_id imx477_dt_ids[] = {
+ { .compatible = "sony,imx477", .data = &imx477_compatible },
+ { .compatible = "sony,imx378", .data = &imx378_compatible },
+ { /* sentinel */ }
+};
+
static int imx477_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
struct imx477 *imx477;
+ const struct of_device_id *match;
int ret;
imx477 = devm_kzalloc(&client->dev, sizeof(*imx477), GFP_KERNEL);
@@ -2090,6 +2138,12 @@ static int imx477_probe(struct i2c_clien
v4l2_i2c_subdev_init(&imx477->sd, client, &imx477_subdev_ops);
+ match = of_match_device(imx477_dt_ids, dev);
+ if (!match)
+ return -ENODEV;
+ imx477->compatible_data =
+ (const struct imx477_compatible_data *)match->data;
+
/* Check the hardware configuration in device tree */
if (imx477_check_hwcfg(dev))
return -EINVAL;
@@ -2126,7 +2180,7 @@ static int imx477_probe(struct i2c_clien
if (ret)
return ret;
- ret = imx477_identify_module(imx477);
+ ret = imx477_identify_module(imx477, imx477->compatible_data->chip_id);
if (ret)
goto error_power_off;
@@ -2198,10 +2252,6 @@ static int imx477_remove(struct i2c_clie
return 0;
}
-static const struct of_device_id imx477_dt_ids[] = {
- { .compatible = "sony,imx477" },
- { /* sentinel */ }
-};
MODULE_DEVICE_TABLE(of, imx477_dt_ids);
static const struct dev_pm_ops imx477_pm_ops = {