mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-01 19:46:51 +00:00
d4c999bb89
backport from wireless-drivers-next, replacing some existing patches in our tree (marked with '=' are those which were already present): f483039cf51a rt2x00: use simple_read_from_buffer() =5c656c71b1bf rt2800: move usb specific txdone/txstatus routines to rt2800lib =0b0d556e0ebb rt2800mmio: use txdone/txstatus routines from lib =5022efb50f62 rt2x00: do not check for txstatus timeout every time on tasklet =adf26a356f13 rt2x00: use different txstatus timeouts when flushing =0240564430c0 rt2800: flush and txstatus rework for rt2800mmio 6eba8fd22352 rt2x00: rt2400pci: mark expected switch fall-through 10bb92217747 rt2x00: rt2500pci: mark expected switch fall-through 916e6bbcfcff rt2x00: rt2800lib: mark expected switch fall-throughs 641dd8068ecb rt2x00: rt61pci: mark expected switch fall-through 750afb08ca71 cross-tree: phase out dma_zalloc_coherent() =c2e28ef7711f rt2x00: reduce tx power to nominal level on RT6352 a4296994eb80 rt2x00: Work around a firmware bug with shared keys 2587791d5758 rt2x00: no need to check return value of debugfs_create functions pending on linux-wireless: rt2x00: remove unneeded check rt2x00: remove confusing AGC register rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band rt2800: enable TX_PIN_CFG_RFRX_EN only for MT7620 rt2800: comment and simplify AGC init for RT6352 rt2x00: do not print error when queue is full rt2800: partially restore old mmio txstatus behaviour rt2800: new flush implementation for SoC devices rt2800: move txstatus pending routine rt2800mmio: fetch tx status changes rt2800mmio: use timer and work for handling tx statuses timeouts rt2x00: remove last_nostatus_check rt2x00: remove not used entry field rt2x00mmio: remove legacy comment While at it also rename some existing patches now that there are separate folders with patches for each driver to make things a bit nicer to handle. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
29 lines
804 B
Diff
29 lines
804 B
Diff
From f8e3fcf18e1f2d7f9e6a9680c5452da090f33d88 Mon Sep 17 00:00:00 2001
|
|
From: Gabor Juhos <juhosg@openwrt.org>
|
|
Date: Thu, 1 Aug 2013 14:40:44 +0200
|
|
Subject: [PATCH] rt2x00: rt2800lib: enable VCO calibration for RF3853
|
|
|
|
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
|
|
---
|
|
drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 ++
|
|
1 file changed, 2 insertions(+)
|
|
|
|
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
|
|
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
|
|
@@ -5051,6 +5051,7 @@ void rt2800_vco_calibration(struct rt2x0
|
|
case RF3053:
|
|
case RF3070:
|
|
case RF3290:
|
|
+ case RF3853:
|
|
case RF5350:
|
|
case RF5360:
|
|
case RF5362:
|
|
@@ -9601,6 +9602,7 @@ static int rt2800_probe_hw_mode(struct r
|
|
case RF3053:
|
|
case RF3070:
|
|
case RF3290:
|
|
+ case RF3853:
|
|
case RF5350:
|
|
case RF5360:
|
|
case RF5362:
|