openwrt/target/linux/bmips/dts/bcm6318-comtrend-ar-5315u.dts
Álvaro Fernández Rojas 28dcb74de3 bmips: add experimental ethernet support
This adds experimental ethernet support for BCM6318, BCM6328, BCM6362, BCM6368
and BCM63268.
BCM6358 needs a different driver, so there's no support for now.

Working devices:
- Comtrend AR-5315u
- Comtrend AR-5387un
- Comtrend VR-3025u
- Comtrend VR-3032u

Not working devices:
- Netgear DGND3700 v2 (no idea on how the external switch is connected)
- Huawei HG556a ver B (BCM6358 needs a separate driveer)

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-03-14 12:05:17 +01:00

216 lines
3.0 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later
#include "bcm6318.dtsi"
/ {
model = "Comtrend AR-5315u";
compatible = "comtrend,ar-5315u", "brcm,bcm6318";
aliases {
led-boot = &led_power_green;
led-failsafe = &led_power_green;
led-running = &led_power_green;
led-upgrade = &led_power_green;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
wps {
label = "wps";
gpios = <&pinctrl 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
};
reset {
label = "reset";
gpios = <&pinctrl 33 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
};
};
};
&ehci {
status = "okay";
};
&ethernet {
status = "okay";
mtd-mac-address = <&cfe 0x6a0>;
};
&hsspi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <62500000>;
spi-tx-bus-width = <2>;
spi-rx-bus-width = <2>;
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
cfe: partition@0 {
reg = <0x000000 0x010000>;
label = "cfe";
read-only;
};
partition@10000 {
compatible = "brcm,bcm963xx-imagetag";
reg = <0x010000 0xfe0000>;
label = "firmware";
};
partition@ff0000 {
reg = <0xff0000 0x010000>;
label = "nvram";
};
};
};
};
&leds {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_leds
&pinctrl_ephy0_act_led &pinctrl_ephy1_act_led
&pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>;
led@0 {
reg = <0>;
active-low;
label = "green:wps";
};
led_power_green: led@1 {
reg = <1>;
active-low;
label = "green:power";
};
led@2 {
reg = <2>;
active-low;
label = "green:usb";
};
led@4 {
reg = <4>;
brcm,hardware-controlled;
brcm,link-signal-sources = <4>;
/* EPHY0 Act */
};
led@5 {
reg = <5>;
brcm,hardware-controlled;
brcm,link-signal-sources = <5>;
/* EPHY1 Act */
};
led@6 {
reg = <6>;
brcm,hardware-controlled;
brcm,link-signal-sources = <6>;
/* EPHY2 Act */
};
led@7 {
reg = <7>;
brcm,hardware-controlled;
brcm,link-signal-sources = <7>;
/* EPHY3 Act */
};
led@8 {
reg = <8>;
active-low;
label = "green:internet";
};
led@9 {
reg = <9>;
active-low;
label = "red:internet";
};
led@10 {
reg = <10>;
active-low;
label = "green:dsl";
};
led@11 {
reg = <11>;
active-low;
label = "red:power";
};
};
&ohci {
status = "okay";
};
&pinctrl {
pinctrl_leds: leds {
function = "led";
pins = "gpio0", "gpio1",
"gpio2", "gpio8",
"gpio9", "gpio10",
"gpio11";
};
};
&switch0 {
ports {
port@0 {
reg = <0>;
label = "lan4";
phy-handle = <&phy1>;
};
port@1 {
reg = <1>;
label = "lan3";
phy-handle = <&phy2>;
};
port@2 {
reg = <2>;
label = "lan2";
phy-handle = <&phy3>;
};
port@3 {
reg = <3>;
label = "lan1";
phy-handle = <&phy4>;
};
};
};
&uart0 {
status = "okay";
};
&usbh {
status = "okay";
};