mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-13 08:20:07 +00:00
f5919b65d4
Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
57 lines
2.1 KiB
Diff
57 lines
2.1 KiB
Diff
From b1311b8bcd1c096c40dca757ba09d88320188e01 Mon Sep 17 00:00:00 2001
|
|
From: Dave Stevenson <dave.stevenson@raspberrypi.org>
|
|
Date: Wed, 13 Jun 2018 15:21:10 +0100
|
|
Subject: [PATCH 314/454] net: lan78xx: Disable TCP Segmentation Offload (TSO)
|
|
|
|
TSO seems to be having issues when packets are dropped and the
|
|
remote end uses Selective Acknowledge (SACK) to denote that
|
|
data is missing. The missing data is never resent, so the
|
|
connection eventually stalls.
|
|
|
|
There is a module parameter of enable_tso added to allow
|
|
further debugging without forcing a rebuild of the kernel.
|
|
|
|
https://github.com/raspberrypi/linux/issues/2449
|
|
https://github.com/raspberrypi/linux/issues/2482
|
|
|
|
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
|
|
---
|
|
drivers/net/usb/lan78xx.c | 19 +++++++++++++++++--
|
|
1 file changed, 17 insertions(+), 2 deletions(-)
|
|
|
|
--- a/drivers/net/usb/lan78xx.c
|
|
+++ b/drivers/net/usb/lan78xx.c
|
|
@@ -415,6 +415,15 @@ static int msg_level = -1;
|
|
module_param(msg_level, int, 0);
|
|
MODULE_PARM_DESC(msg_level, "Override default message level");
|
|
|
|
+/* TSO seems to be having some issue with Selective Acknowledge (SACK) that
|
|
+ * results in lost data never being retransmitted.
|
|
+ * Disable it by default now, but adds a module parameter to enable it for
|
|
+ * debug purposes (the full cause is not currently understood).
|
|
+ */
|
|
+static bool enable_tso;
|
|
+module_param(enable_tso, bool, 0644);
|
|
+MODULE_PARM_DESC(enable_tso, "Enables TCP segmentation offload");
|
|
+
|
|
static int lan78xx_read_reg(struct lan78xx_net *dev, u32 index, u32 *data)
|
|
{
|
|
u32 *buf = kmalloc(sizeof(u32), GFP_KERNEL);
|
|
@@ -2891,8 +2900,14 @@ static int lan78xx_bind(struct lan78xx_n
|
|
if (DEFAULT_RX_CSUM_ENABLE)
|
|
dev->net->features |= NETIF_F_RXCSUM;
|
|
|
|
- if (DEFAULT_TSO_CSUM_ENABLE)
|
|
- dev->net->features |= NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_SG;
|
|
+ if (DEFAULT_TSO_CSUM_ENABLE) {
|
|
+ dev->net->features |= NETIF_F_SG;
|
|
+ /* Use module parameter to control TCP segmentation offload as
|
|
+ * it appears to cause issues.
|
|
+ */
|
|
+ if (enable_tso)
|
|
+ dev->net->features |= NETIF_F_TSO | NETIF_F_TSO6;
|
|
+ }
|
|
|
|
if (DEFAULT_VLAN_RX_OFFLOAD)
|
|
dev->net->features |= NETIF_F_HW_VLAN_CTAG_RX;
|