openwrt/target/linux/lantiq/dts/P2601HNFX.dts
John Crispin 3cbfc74cde lantiq: use devicename:colour:function led naming scheme
The leds of the following boards are not renamed due to lack of
manuals/informations:

- ARV7519PW
- ARV7510PW22
- ARV4510PW

The leds of the ARV4518PWR01* boards are unchanged, since the leds doesn't
match the leds from the manual or pictures (e.g. there shouldn't be a wps led).

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48042
2016-01-01 21:18:54 +00:00

203 lines
3.6 KiB
Plaintext

/dts-v1/;
/include/ "ar9.dtsi"
/ {
model = "P2601HNFX - ZyXEL P-2601HN-Fx";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
leds {
boot = &power_green;
failsafe = &power_red;
running = &power_green;
dsl = &dsl;
internet = &online;
wifi = &wifi;
};
};
memory@0 {
reg = <0x0 0x4000000>;
};
fpi@10000000 {
#address-cells = <1>;
#size-cells = <1>;
localbus@0 {
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x0 0x3ffffff
1 0 0x4000000 0x4000010>;
compatible = "lantiq,localbus", "simple-bus";
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x40000>;
read-only;
};
partition@40000 {
label = "uboot_env";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "firmware";
reg = <0x60000 0xfa0000>;
};
};
};
gpio: pinmux@E100B10 {
compatible = "lantiq,pinctrl-xr9";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
#gpio-cells = <2>;
gpio-controller;
reg = <0xE100B10 0xA0>;
state_default: pinmux {
stp {
lantiq,groups = "stp";
lantiq,function = "stp";
lantiq,pull = <2>;
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
exin {
lantiq,groups = "exin1";
lantiq,function = "exin";
};
pci {
lantiq,groups = "gnt1";
lantiq,function = "pci";
};
conf_out {
lantiq,pins = "io4", "io5", "io6";
lantiq,open-drain;
lantiq,pull = <0>;
};
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
};
};
etop@E180000 {
phy-mode = "rmii";
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 9 0>;
};
stp: stp@E100BB0 {
#gpio-cells = <2>;
compatible = "lantiq,gpio-stp-xway";
gpio-controller;
reg = <0xE100BB0 0x40>;
lantiq,shadow = <0xfff>;
lantiq,groups = <0x3>;
};
pci@E105400 {
lantiq,bus-clock = <33333333>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <0x7000 0 0 1 &icu0 29 1>;
gpios-reset = <&gpio 21 0>;
req-mask = <0x1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 53 1>;
linux,code = <0x198>;
};
rfkill {
label = "rfkill";
gpios = <&gpio 54 1>;
linux,code = <0xf7>;
};
};
gpio-leds {
compatible = "gpio-leds";
power_green: power {
label = "p2601hnfx:green:power";
gpios = <&stp 11 1>;
default-state = "keep";
};
power_red: power2 {
label = "p2601hnfx:red:power";
gpios = <&gpio 29 1>;
};
online: online {
label = "p2601hnfx:green:internet";
gpios = <&stp 13 1>;
};
online2 {
label = "p2601hnfx:red:internet";
gpios = <&stp 12 1>;
};
dsl: dsl {
label = "p2601hnfx:green:dsl";
gpios = <&stp 14 1>;
};
phone {
label = "p2601hnfx:green:phone";
gpios = <&stp 9 1>;
};
phone2 {
label = "p2601hnfx:orange:phone";
gpios = <&stp 8 1>;
};
wifi: wifi {
label = "p2601hnfx:green:wireless";
gpios = <&stp 15 1>;
};
wifi2 {
label = "p2601hnfx:orange:wireless";
gpios = <&stp 10 1>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
switch {
gpio-export,name = "switch";
gpio-export,output = <1>;
gpios = <&gpio 50 0>;
};
usb {
gpio-export,name = "wifi";
gpio-export,output = <1>;
gpios = <&gpio 9 0>;
};
};
};