openwrt/target/linux/mediatek/dts/mt7981b-h3c-magic-nx30-pro.dts
Daniel Golle 52ef01672c mediatek: filogic: convert H3C Magic NX30 Pro to fitblk
Use fitblk driver instead of deprecated partition parser.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-08-28 15:11:51 +01:00

252 lines
4.0 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include "mt7981.dtsi"
/ {
model = "H3C Magic NX30 Pro";
compatible = "h3c,magic-nx30-pro", "mediatek,mt7981";
aliases {
serial0 = &uart0;
led-boot = &led_status_green;
led-failsafe = &led_status_red;
led-running = &led_status_green;
led-upgrade = &led_status_red;
};
chosen {
bootargs-append = " root=/dev/fit0 rootwait";
rootdisk = <&ubi_rootdisk>;
stdout-path = "serial0:115200n8";
};
memory {
reg = <0 0x40000000 0 0x10000000>;
};
gpio-keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
};
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&pio 0 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
led_status_green: green {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
gpios = <&pio 4 GPIO_ACTIVE_LOW>;
};
led_status_red: red {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_RED>;
gpios = <&pio 5 GPIO_ACTIVE_LOW>;
};
};
};
&eth {
status = "okay";
gmac0: mac@0 {
compatible = "mediatek,eth-mac";
reg = <0>;
phy-mode = "2500base-x";
fixed-link {
speed = <2500>;
full-duplex;
pause;
};
};
gmac1: mac@1 {
compatible = "mediatek,eth-mac";
reg = <1>;
phy-mode = "gmii";
phy-handle = <&int_gbe_phy>;
};
};
&mdio_bus {
switch: switch@1f {
compatible = "mediatek,mt7531";
reg = <31>;
reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&pio>;
interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
};
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_flash_pins>;
status = "okay";
spi_nand@0 {
compatible = "spi-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
spi-max-frequency = <52000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "BL2";
reg = <0x0000000 0x0100000>;
read-only;
};
partition@100000 {
label = "u-boot-env";
reg = <0x0100000 0x0080000>;
};
factory: partition@180000 {
label = "Factory";
reg = <0x0180000 0x0200000>;
read-only;
};
partition@380000 {
label = "FIP";
reg = <0x0380000 0x0200000>;
read-only;
};
partition@580000 {
label = "ubi";
reg = <0x0580000 0x4000000>;
compatible = "linux,ubi";
volumes {
ubi_rootdisk: ubi-volume-fit {
volname = "fit";
};
};
};
/* yaffs partition */
partition@4580000 {
label = "pdt_data";
reg = <0x4580000 0x0600000>;
read-only;
};
/* yaffs partition */
partition@4b80000 {
label = "pdt_data_1";
reg = <0x4b80000 0x0600000>;
read-only;
};
partition@5180000 {
label = "exp";
reg = <0x5180000 0x0100000>;
read-only;
};
partition@5280000 {
label = "plugin";
reg = <0x5280000 0x2580000>;
read-only;
};
};
};
};
&switch {
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan1";
};
port@1 {
reg = <1>;
label = "lan2";
};
port@2 {
reg = <2>;
label = "lan3";
};
port@6 {
reg = <6>;
ethernet = <&gmac0>;
phy-mode = "2500base-x";
fixed-link {
speed = <2500>;
full-duplex;
pause;
};
};
};
};
&pio {
spi0_flash_pins: spi0-pins {
mux {
function = "spi";
groups = "spi0", "spi0_wp_hold";
};
conf-pu {
pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
drive-strength = <8>;
mediatek,pull-up-adv = <0>; /* bias-disable */
};
conf-pd {
pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
drive-strength = <8>;
mediatek,pull-up-adv = <0>; /* bias-disable */
};
};
};
&uart0 {
status = "okay";
};
&watchdog {
status = "okay";
};
&wifi {
status = "okay";
mediatek,mtd-eeprom = <&factory 0x0>;
};