mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 06:57:57 +00:00
502916468e
Specifications: - Device: ASUS 4g-AX56 - SoC: MT7621AT - Flash: 128MB - RAM: 512MB - Switch: 1 WAN, 4 LAN (10/100/1000 Mbps) - WiFi: MT7905 2x2 2.4G + MT7975 2x2 5G - LTE : Fibocom FG621-EA - LEDs: 1x POWER (white, configurable) 1x 2.4G (white, not configurable) 1x 5G (white, not configurable) 1x WAN (white, not configurable) 1x 3G/4G (white, not configurable) 3x signal (white, not configurable) Flash by U-Boot TFTP method: - Configure your PC with IP 192.168.0.2 - Set up TFTP server and put the factory.bin image on your PC - Connect serial port(rate:115200) and turn on AP, then interrupt "U-Boot Boot Menu" by hitting any key Select "2. Upgrade firmware" Press enter when show "Run firmware after upgrading? (Y/n):" Select 0 for TFTP method Input U-Boot's IP address: 192.168.0.1 Input TFTP server's IP address: 192.168.0.2 Input IP netmask: 255.255.255.0 Input file name: openwrt-ramips-mt7621-asus_4g-ax56-squashfs-factory.bin - Restart AP aftre see the log "Firmware upgrade completed!" Notice: - LTE module is disable after flash openwrt image so you must active LTE by following two AT command echo -e "AT+GTAUTOCONNECT=1\r\n" > /dev/ttyUSB0 echo -e "AT+GTRNDIS=1,1\r\n" > /dev/ttyUSB0 - After finish AT command once, you don't need to input command later even if reboot/restore default Signed-off-by: Chuncheng Chen <ccchen1984@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16752 Signed-off-by: John Crispin <john@phrozen.org> |
||
---|---|---|
.. | ||
apm821xx | ||
ath79 | ||
cns3xxx | ||
fw_defaults | ||
fw_loadenv | ||
fw_printsys | ||
fw_setsys | ||
imx_cortexa7 | ||
imx_cortexa9 | ||
ipq40xx | ||
ipq806x | ||
kirkwood | ||
lantiq | ||
layerscape | ||
mediatek_filogic | ||
mediatek_mt7622 | ||
mediatek_mt7623 | ||
mediatek_mt7629 | ||
mpc85xx | ||
mvebu | ||
mxs | ||
octeon | ||
oxnas | ||
pistachio | ||
qoriq | ||
qualcommax_ipq60xx | ||
qualcommax_ipq807x | ||
ramips | ||
realtek | ||
rockchip_armv8 | ||
uboot-envtools.sh |