openwrt/target/linux/ramips
David Bauer 82fa7b9d78 ramips: use phytpt trigger for mt76 wireless
With this change, the LED trigger is independent from the (wireless)
netdev name. The (wireless) netdev name can be easiliy changed in
OpenWrt and would require an update of the netdev trigger settings each
time it is done.

This change is (for now) applied only to MT7628 devices from TP-Link, as
we only had the possibility to test this change against two of those
devices, namely a TL-WR841 v13 and a Archer C50 v3.

Signed-off-by: David Bauer <mail@david-bauer.net>
2018-06-16 10:08:51 +02:00
..
base-files ramips: use phytpt trigger for mt76 wireless 2018-06-16 10:08:51 +02:00
dts ramips: fix mt7688 watchdog register base addr 2018-06-16 10:08:51 +02:00
files-4.14/drivers ramips: mt7621: fix mtu setting with kernel 4.14 2018-06-16 10:08:51 +02:00
image ramips: add support for I-O DATA WN-GX300GR 2018-06-08 09:56:27 +02:00
mt76x8 kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
mt7620 kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
mt7621 ramips: mir3g dts define usb port Vcc volt regulator GPIO 2018-06-08 09:31:36 +02:00
patches-4.14 ramips: rename ethernet driver folder to the same one that upstream uses 2018-06-13 12:54:25 +02:00
rt288x kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
rt305x ramips: add dwr-512 jboot firmware configuration 2018-04-08 09:51:06 +02:00
rt3883 kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
Makefile ramips: switch to linux 4.14 2018-04-06 18:07:43 +02:00
modules.mk ramips: rename pwm kernel module 2018-04-08 12:35:33 +02:00