openwrt/target/linux/ath79/dts/ar7240_engenius_enh202-v1.dts
Bjørn Mork 01a1e21863 kernel: mtdsplit_uimage: replace "openwrt, okli" parser
The only difference between the "openwrt,okli" and the generic
parser is the magic.  Set this in device tree for all affected
devices and  remove the "openwrt,okli" parser.

Tested-by: Michael Pratt <mcpratt@protonmail.com> # EAP300 v2, ENS202EXT and ENH202
Signed-off-by: Bjørn Mork <bjorn@mork.no>
2021-01-22 21:03:11 +01:00

185 lines
3.0 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar7240.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/mtd/partitions/uimage.h>
/ {
compatible = "engenius,enh202-v1", "qca,ar7240";
model = "EnGenius ENH202 v1";
aliases {
led-boot = &led_rssihigh;
led-failsafe = &led_rssihigh;
led-running = &led_rssihigh;
led-upgrade = &led_rssihigh;
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&jtag_disable_pins &switch_led_disable_pins &clks_disable_pins>;
rssilow {
label = "red:rssilow";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
rssimedium {
label = "amber:rssimedium";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
led_rssihigh: rssihigh {
label = "green:rssihigh";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
lan {
label = "amber:lan";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
wan {
label = "green:wan";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
ath9k-leds {
compatible = "gpio-leds";
wlan {
label = "green:wlan";
gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
virtual_flash {
compatible = "mtd-concat";
devices = <&fwconcat0 &fwconcat1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
compatible = "openwrt,uimage", "denx,uimage";
openwrt,ih-magic = <IH_MAGIC_OKLI>;
label = "firmware";
reg = <0x0 0x0>;
};
};
};
};
&uart {
status = "okay";
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x40000 0x10000>;
};
partition@50000 {
label = "custom";
reg = <0x50000 0x50000>;
read-only;
};
partition@a0000 {
label = "loader";
reg = <0xa0000 0x10000>;
read-only;
};
fwconcat1: partition@b0000 {
label = "fwconcat1";
reg = <0xb0000 0xf0000>;
};
partition@1a0000 {
label = "fakeroot";
reg = <0x1a0000 0x10000>;
read-only;
};
fwconcat0: partition@1b0000 {
label = "fwconcat0";
reg = <0x1b0000 0x4c0000>;
};
partition@670000 {
label = "failsafe";
reg = <0x670000 0x180000>;
read-only;
};
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x10000>;
read-only;
};
};
};
};
&eth0 {
mtd-mac-address = <&art 0x0>;
};
&eth1 {
status = "okay";
mtd-mac-address = <&art 0x0>;
};
&pcie {
status = "okay";
ath9k: wifi@0,0 {
compatible = "pci168c,002a";
reg = <0x0000 0 0 0 0>;
qca,no-eeprom;
#gpio-cells = <2>;
gpio-controller;
};
};