mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 00:11:13 +00:00
82618062cf
This patch adds support for ZyXEL NBG6617
Hardware highlights:
SOC: IPQ4018 / QCA Dakota
CPU: Quad-Core ARMv7 Processor rev 5 (v7l) Cortex-A7
DRAM: 256 MiB DDR3L-1600/1866 Nanya NT5CC128M16IP-DI @ 537 MHz
NOR: 32 MiB Macronix MX25L25635F
ETH: Qualcomm Atheros QCA8075 Gigabit Switch (4 x LAN, 1 x WAN)
USB: 1 x 3.0 (via Synopsys DesignWare DWC3 controller in the SoC)
WLAN1: Qualcomm Atheros QCA4018 2.4GHz 802.11bgn 2:2x2
WLAN2: Qualcomm Atheros QCA4018 5GHz 802.11a/n/ac 2:2x2
INPUT: RESET Button, WIFI/Rfkill Togglebutton, WPS Button
LEDS: Power, WAN, LAN 1-4, WLAN 2.4GHz, WLAN 5GHz, USB, WPS
Serial:
WARNING: The serial port needs a TTL/RS-232 3.3v level converter!
The Serial setting is 115200-8-N-1. The 1x4 .1" header comes
pre-soldered. Pinout:
1. 3v3 (Label printed on the PCB), 2. RX, 3. GND, 4. TX
first install / debricking / restore stock:
0. Have a PC running a tftp-server @ 192.168.1.99/24
1. connect the PC to any LAN-Ports
2. put the openwrt...-factory.bin (or V1.00(ABCT.X).bin for stock) file
into the tftp-server root directory and rename it to just "ras.bin".
3. power-cycle the router and hold down the the WPS button (for 30sek)
4. Wait (for a long time - the serial console provides some progress
reports. The u-boot says it best: "Please be patient".
5. Once the power LED starts to flashes slowly and the USB + WPS LEDs
flashes fast at the same time. You have to reboot the device and
it should then come right up.
Installation via Web-UI:
0. Connect a PC to the powered-on router. It will assign your PC a
IP-address via DHCP
1. Access the Web-UI at 192.168.1.1 (Default Passwort: 1234)
2. Go to the "Expert Mode"
3. Under "Maintenance", select "Firmware-Upgrade"
4. Upload the OpenWRT factory image
5. Wait for the Device to finish.
It will reboot into OpenWRT without any additional actions needed.
To open the ZyXEL NBG6617:
0. remove the four rubber feet glued on the backside
1. remove the four philips screws and pry open the top cover
(by applying force between the plastic top housing from the
backside/lan-port side)
Access the real u-boot shell:
ZyXEL uses a proprietary loader/shell on top of u-boot: "ZyXEL zloader v2.02"
When the device is starting up, the user can enter the the loader shell
by simply pressing a key within the 3 seconds once the following string
appears on the serial console:
| Hit any key to stop autoboot: 3
The user is then dropped to a locked shell.
|NBG6617> HELP
|ATEN x[,y] set BootExtension Debug Flag (y=password)
|ATSE x show the seed of password generator
|ATSH dump manufacturer related data in ROM
|ATRT [x,y,z,u] RAM read/write test (x=level, y=start addr, z=end addr, u=iterations)
|ATGO boot up whole system
|ATUR x upgrade RAS image (filename)
|NBG6617>
In order to escape/unlock a password challenge has to be passed.
Note: the value is dynamic! you have to calculate your own!
First use ATSE $MODELNAME (MODELNAME is the hostname in u-boot env)
to get the challange value/seed.
|NBG6617> ATSE NBG6617
|012345678901
This seed/value can be converted to the password with the help of this
bash script (Thanks to http://www.adslayuda.com/Zyxel650-9.html authors):
- tool.sh -
ror32() {
echo $(( ($1 >> $2) | (($1 << (32 - $2) & (2**32-1)) ) ))
}
v="0x$1"
a="0x${v:2:6}"
b=$(( $a + 0x10F0A563))
c=$(( 0x${v:12:14} & 7 ))
p=$(( $(ror32 $b $c) ^ $a ))
printf "ATEN 1,%X\n" $p
- end of tool.sh -
|# bash ./tool.sh 012345678901
|
|ATEN 1,879C711
copy and paste the result into the shell to unlock zloader.
|NBG6617> ATEN 1,0046B0017430
If the entered code was correct the shell will change to
use the ATGU command to enter the real u-boot shell.
|NBG6617> ATGU
|NBG6617#
Co-authored-by: David Bauer <mail@david-bauer.net>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: David Bauer <mail@david-bauer.net>
242 lines
7.8 KiB
Makefile
242 lines
7.8 KiB
Makefile
include $(TOPDIR)/rules.mk
|
|
include $(INCLUDE_DIR)/image.mk
|
|
|
|
DEVICE_VARS += RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
|
|
|
|
define Device/Default
|
|
PROFILES := Default
|
|
KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
|
|
KERNEL_INITRAMFS_PREFIX := $$(IMG_PREFIX)-$(1)-initramfs
|
|
KERNEL_PREFIX := $$(IMAGE_PREFIX)
|
|
KERNEL_LOADADDR := 0x80208000
|
|
SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
|
|
IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
|
|
IMAGE/sysupgrade.bin/squashfs :=
|
|
endef
|
|
|
|
define Device/FitImage
|
|
KERNEL_SUFFIX := -fit-uImage.itb
|
|
KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
|
|
KERNEL_NAME := Image
|
|
endef
|
|
|
|
define Device/FitImageLzma
|
|
KERNEL_SUFFIX := -fit-uImage.itb
|
|
KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb
|
|
KERNEL_NAME := Image
|
|
endef
|
|
|
|
define Device/UbiFit
|
|
KERNEL_IN_UBI := 1
|
|
IMAGES := nand-factory.ubi nand-sysupgrade.bin
|
|
IMAGE/nand-factory.ubi := append-ubi
|
|
IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
|
|
define Device/DniImage
|
|
KERNEL_SUFFIX := -fit-uImage.itb
|
|
KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
|
|
KERNEL_NAME := Image
|
|
NETGEAR_BOARD_ID :=
|
|
NETGEAR_HW_ID :=
|
|
IMAGES := factory.img sysupgrade.bin
|
|
IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | netgear-dni
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
|
|
endef
|
|
DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
|
|
|
|
|
|
define Device/8dev_jalapeno
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_DTS := qcom-ipq4018-jalapeno
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_TITLE := 8devices Jalapeno
|
|
endef
|
|
TARGET_DEVICES += 8dev_jalapeno
|
|
|
|
define Device/asus_rt-ac58u
|
|
$(call Device/FitImageLzma)
|
|
DEVICE_DTS := qcom-ipq4018-rt-ac58u
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DTB_SIZE := 65536
|
|
DEVICE_TITLE := Asus RT-AC58U
|
|
IMAGE_SIZE := 20439364
|
|
FILESYSTEMS := squashfs
|
|
# Someone - in their infinite wisdom - decided to put the firmware
|
|
# version in front of the image name \03\00\00\04 => Version 3.0.0.4
|
|
# Since u-boot works with strings we either need another fixup step
|
|
# to add a version... or we are very careful not to add '\0' into that
|
|
# string and call it a day.... Yeah, we do the latter!
|
|
UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U')
|
|
IMAGES := sysupgrade.bin
|
|
DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += asus_rt-ac58u
|
|
|
|
define Device/avm_fritzbox-4040
|
|
$(call Device/FitImageLzma)
|
|
DEVICE_DTS := qcom-ipq4018-fritz4040
|
|
BOARD_NAME := fritz4040
|
|
DEVICE_TITLE := AVM Fritz!Box 4040
|
|
IMAGE_SIZE := 29753344
|
|
UBOOT_PATH := $$(BIN_DIR)/u-boot-fritz4040/uboot-fritz4040.bin
|
|
UBOOT_PARTITION_SIZE := 524288
|
|
IMAGES = eva.bin sysupgrade.bin
|
|
IMAGE/eva.bin := append-uboot | pad-to $$$$(UBOOT_PARTITION_SIZE) | append-kernel | append-rootfs | pad-rootfs
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
|
|
DEVICE_PACKAGES := fritz-tffs fritz-caldata u-boot-fritz4040
|
|
endef
|
|
TARGET_DEVICES += avm_fritzbox-4040
|
|
|
|
define Device/compex_wpj428
|
|
$(call Device/FitImage)
|
|
DEVICE_DTS := qcom-ipq4028-wpj428
|
|
DEVICE_DTS_CONFIG := config@4
|
|
BLOCKSIZE := 64k
|
|
DEVICE_TITLE := Compex WPJ428
|
|
IMAGE_SIZE := 31232k
|
|
KERNEL_SIZE := 4096k
|
|
IMAGES = sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
|
|
DEVICE_PACKAGES := kmod-gpio-beeper
|
|
endef
|
|
TARGET_DEVICES += compex_wpj428
|
|
|
|
define Device/glinet_gl-b1300
|
|
$(call Device/FitImage)
|
|
DEVICE_TITLE := GL.iNet GL-B1300
|
|
BOARD_NAME := gl-b1300
|
|
DEVICE_DTS := qcom-ipq4029-gl-b1300
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 26624k
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-b1300
|
|
|
|
define Device/meraki_mr33
|
|
$(call Device/FitImage)
|
|
DEVICE_DTS := qcom-ipq4029-mr33
|
|
BLOCKSIZE := 131072
|
|
PAGESIZE := 2048
|
|
DEVICE_TITLE := Cisco Meraki MR33
|
|
IMAGES = sysupgrade.bin
|
|
DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887
|
|
endef
|
|
TARGET_DEVICES += meraki_mr33
|
|
|
|
define Device/netgear_ex61x0v2
|
|
$(call Device/DniImage)
|
|
KERNEL_SIZE := 3080192
|
|
DEVICE_DTS_CONFIG := config@4
|
|
NETGEAR_BOARD_ID := EX6150v2series
|
|
NETGEAR_HW_ID := 29765285+16+0+128+2x2
|
|
endef
|
|
|
|
define Device/netgear_ex6100v2
|
|
$(call Device/netgear_ex61x0v2)
|
|
DEVICE_DTS := qcom-ipq4018-ex6100v2
|
|
DEVICE_TITLE := Netgear EX6100v2
|
|
endef
|
|
TARGET_DEVICES += netgear_ex6100v2
|
|
|
|
define Device/netgear_ex6150v2
|
|
$(call Device/netgear_ex61x0v2)
|
|
DEVICE_DTS := qcom-ipq4018-ex6150v2
|
|
DEVICE_TITLE := Netgear EX6150v2
|
|
endef
|
|
TARGET_DEVICES += netgear_ex6150v2
|
|
|
|
define Device/openmesh_a42
|
|
$(call Device/FitImageLzma)
|
|
DEVICE_DTS := qcom-ipq4018-a42
|
|
DEVICE_DTS_CONFIG := config@om.a42
|
|
BLOCKSIZE := 64k
|
|
DEVICE_TITLE := OpenMesh A42
|
|
KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
|
|
IMAGE_SIZE := 15616k
|
|
IMAGES = factory.bin sysupgrade.bin
|
|
IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
|
|
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
|
|
DEVICE_PACKAGES := uboot-envtools
|
|
endef
|
|
TARGET_DEVICES += openmesh_a42
|
|
|
|
define Device/openmesh_a62
|
|
$(call Device/FitImageLzma)
|
|
DEVICE_DTS := qcom-ipq4019-a62
|
|
DEVICE_DTS_CONFIG := config@om.a62
|
|
BLOCKSIZE := 64k
|
|
DEVICE_TITLE := OpenMesh A62
|
|
KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
|
|
IMAGE_SIZE := 15552k
|
|
IMAGES = factory.bin sysupgrade.bin
|
|
IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
|
|
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
|
|
DEVICE_PACKAGES := ath10k-firmware-qca9888 uboot-envtools
|
|
endef
|
|
|
|
TARGET_DEVICES += openmesh_a62
|
|
|
|
define Device/qcom_ap-dk01.1-c1
|
|
DEVICE_TITLE := QCA AP-DK01.1-C1
|
|
BOARD_NAME := ap-dk01.1-c1
|
|
DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
|
|
KERNEL_INSTALL := 1
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 26624k
|
|
$(call Device/FitImage)
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
|
|
endef
|
|
TARGET_DEVICES += qcom_ap-dk01.1-c1
|
|
|
|
define Device/qcom_ap-dk04.1-c1
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
|
|
KERNEL_INSTALL := 1
|
|
KERNEL_SIZE := 4048k
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := ap-dk04.1-c1
|
|
DEVICE_TITLE := QCA AP-DK04.1-C1
|
|
endef
|
|
TARGET_DEVICES += qcom_ap-dk04.1-c1
|
|
|
|
define Device/zyxel_nbg6617
|
|
$(call Device/FitImageLzma)
|
|
DEVICE_DTS := qcom-ipq4018-nbg6617
|
|
DEVICE_TITLE := ZyXEL NBG6617
|
|
ROOTFS_SIZE := 24960k
|
|
RAS_BOARD := NBG6617
|
|
RAS_ROOTFS_SIZE := 19840k
|
|
RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
|
|
IMAGES := sysupgrade.bin factory.bin
|
|
# The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
|
|
# at least as large as the one of the initial firmware image (not the current
|
|
# one on the device). This only applies to the Web-UI, the bootlaoder ignores
|
|
# this minimum-size. However, the larger image can be flashed both ways.
|
|
IMAGE/factory.bin := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | make-ras
|
|
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
|
|
DEVICE_PACKAGES := ipq-wifi-zyxel_nbg6617 uboot-envtools
|
|
endef
|
|
TARGET_DEVICES += zyxel_nbg6617
|
|
|
|
define Device/zyxel_wre6606
|
|
$(call Device/FitImage)
|
|
DEVICE_TITLE := ZyXEL WRE6606
|
|
DEVICE_DTS_CONFIG := config@4
|
|
DEVICE_DTS := qcom-ipq4018-wre6606
|
|
DEVICE_PACKAGES := ipq-wifi-zyxel_wre6606
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
|
|
endef
|
|
TARGET_DEVICES += zyxel_wre6606
|
|
|
|
$(eval $(call BuildImage))
|