openwrt/target/linux/ramips/patches-6.6/312-MIPS-ralink-add-cpu-frequency-scaling.patch
Shiji Yang 0c57510ced ramips: mt76x8: disable unused Ralink systick driver
The mt76x8 series SoCs use the MIPS generic systick timer. Sync the
upstream Ralink systick driver changes and disable it for mt76x8
target to reduce the kernel size.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16844
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-11-24 23:28:53 +01:00

203 lines
5.7 KiB
Diff

From: John Crispin <blogic@openwrt.org>
Date: Sun, 28 Jul 2013 16:26:41 +0200
Subject: [PATCH 2/2] MIPS: ralink: add cpu frequency scaling
This feature will break udelay() and cause the delay loop to have longer delays
when the frequency is scaled causing a performance hit.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
drivers/clocksource/timer-ralink.c | 117 ++++++++++++++++++++++-------
1 file changed, 89 insertions(+), 28 deletions(-)
--- a/drivers/clocksource/timer-ralink.c
+++ b/drivers/clocksource/timer-ralink.c
@@ -5,6 +5,7 @@
* Copyright (C) 2013 by John Crispin <john@phrozen.org>
*/
+#include <asm/mach-ralink/ralink_regs.h>
#include <linux/clockchips.h>
#include <linux/clocksource.h>
#include <linux/interrupt.h>
@@ -26,6 +27,10 @@
/* enable the counter */
#define CFG_CNT_EN 0x1
+/* mt7620 frequency scaling defines */
+#define CLK_LUT_CFG 0x40
+#define SLEEP_EN BIT(31)
+
struct systick_device {
void __iomem *membase;
struct clock_event_device dev;
@@ -33,21 +38,53 @@ struct systick_device {
int freq_scale;
};
+static void (*systick_freq_scaling)(struct systick_device *sdev, int status);
+
static int systick_set_oneshot(struct clock_event_device *evt);
static int systick_shutdown(struct clock_event_device *evt);
+static inline void mt7620_freq_scaling(struct systick_device *sdev, int status)
+{
+ if (sdev->freq_scale == status)
+ return;
+
+ sdev->freq_scale = status;
+
+ pr_info("%s: %s autosleep mode\n", sdev->dev.name,
+ (status) ? ("enable") : ("disable"));
+ if (status)
+ rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) | SLEEP_EN, CLK_LUT_CFG);
+ else
+ rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) & ~SLEEP_EN, CLK_LUT_CFG);
+}
+
+static inline unsigned int read_count(struct systick_device *sdev)
+{
+ return ioread32(sdev->membase + SYSTICK_COUNT);
+}
+
+static inline unsigned int read_compare(struct systick_device *sdev)
+{
+ return ioread32(sdev->membase + SYSTICK_COMPARE);
+}
+
+static inline void write_compare(struct systick_device *sdev, unsigned int val)
+{
+ iowrite32(val, sdev->membase + SYSTICK_COMPARE);
+}
+
static int systick_next_event(unsigned long delta,
struct clock_event_device *evt)
{
struct systick_device *sdev;
- u32 count;
+ int res;
sdev = container_of(evt, struct systick_device, dev);
- count = ioread32(sdev->membase + SYSTICK_COUNT);
- count = (count + delta) % SYSTICK_FREQ;
- iowrite32(count, sdev->membase + SYSTICK_COMPARE);
+ delta += read_count(sdev);
+ write_compare(sdev, delta);
+ res = ((int)(read_count(sdev) - delta) >= 0) ? -ETIME : 0;
- return 0;
+ return res;
}
static void systick_event_handler(struct clock_event_device *dev)
@@ -57,20 +94,25 @@ static void systick_event_handler(struct
static irqreturn_t systick_interrupt(int irq, void *dev_id)
{
- struct clock_event_device *dev = (struct clock_event_device *)dev_id;
+ int ret = 0;
+ struct clock_event_device *cdev;
+ struct systick_device *sdev;
- dev->event_handler(dev);
+ if (read_c0_cause() & STATUSF_IP7) {
+ cdev = (struct clock_event_device *)dev_id;
+ sdev = container_of(cdev, struct systick_device, dev);
+
+ /* Clear Count/Compare Interrupt */
+ write_compare(sdev, read_compare(sdev));
+ cdev->event_handler(cdev);
+ ret = 1;
+ }
- return IRQ_HANDLED;
+ return IRQ_RETVAL(ret);
}
static struct systick_device systick = {
.dev = {
- /*
- * cevt-r4k uses 300, make sure systick
- * gets used if available
- */
- .rating = 310,
.features = CLOCK_EVT_FEAT_ONESHOT,
.set_next_event = systick_next_event,
.set_state_shutdown = systick_shutdown,
@@ -88,7 +130,13 @@ static int systick_shutdown(struct clock
if (sdev->irq_requested)
free_irq(systick.dev.irq, &systick.dev);
sdev->irq_requested = 0;
- iowrite32(0, systick.membase + SYSTICK_CONFIG);
+ iowrite32(CFG_CNT_EN, systick.membase + SYSTICK_CONFIG);
+
+ if (systick_freq_scaling)
+ systick_freq_scaling(sdev, 0);
+
+ if (systick_freq_scaling)
+ systick_freq_scaling(sdev, 1);
return 0;
}
@@ -113,33 +161,46 @@ static int systick_set_oneshot(struct cl
return 0;
}
+static const struct of_device_id systick_match[] = {
+ { .compatible = "ralink,mt7620a-systick", .data = mt7620_freq_scaling},
+ {},
+};
+
static int __init ralink_systick_init(struct device_node *np)
{
- int ret;
+ const struct of_device_id *match;
+ int rating = 200;
systick.membase = of_iomap(np, 0);
if (!systick.membase)
return -ENXIO;
- systick.dev.name = np->name;
- clockevents_calc_mult_shift(&systick.dev, SYSTICK_FREQ, 60);
- systick.dev.max_delta_ns = clockevent_delta2ns(0x7fff, &systick.dev);
- systick.dev.max_delta_ticks = 0x7fff;
- systick.dev.min_delta_ns = clockevent_delta2ns(0x3, &systick.dev);
- systick.dev.min_delta_ticks = 0x3;
+ match = of_match_node(systick_match, np);
+ if (match) {
+ systick_freq_scaling = match->data;
+ /*
+ * cevt-r4k uses 300, make sure systick
+ * gets used if available
+ */
+ rating = 310;
+ }
+
+ /* enable counter than register clock source */
+ iowrite32(CFG_CNT_EN, systick.membase + SYSTICK_CONFIG);
+ clocksource_mmio_init(systick.membase + SYSTICK_COUNT, np->name,
+ SYSTICK_FREQ, rating, 16, clocksource_mmio_readl_up);
+
+ /* register clock event */
systick.dev.irq = irq_of_parse_and_map(np, 0);
if (!systick.dev.irq) {
pr_err("%pOFn: request_irq failed", np);
return -EINVAL;
}
- ret = clocksource_mmio_init(systick.membase + SYSTICK_COUNT, np->name,
- SYSTICK_FREQ, 301, 16,
- clocksource_mmio_readl_up);
- if (ret)
- return ret;
-
- clockevents_register_device(&systick.dev);
+ systick.dev.name = np->name;
+ systick.dev.rating = rating;
+ systick.dev.cpumask = cpumask_of(0);
+ clockevents_config_and_register(&systick.dev, SYSTICK_FREQ, 0x3, 0x7fff);
pr_info("%pOFn: running - mult: %d, shift: %d\n",
np, systick.dev.mult, systick.dev.shift);