openwrt/target/linux/ath79/dts/qca9558_tplink_tl-wdr7500-v3.dts
Rosen Penev 74f2df9dbc ath79: mtd-cal-data removals
Replacement can be done with nvmem.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2024-06-09 12:24:15 +02:00

100 lines
1.7 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca9558_tplink_archer-c.dtsi"
/ {
compatible = "tplink,tl-wdr7500-v3", "qca,qca9558";
model = "TP-Link TL-WDR7500 v3";
aliases {
label-mac-device = &eth1;
};
};
&keys {
rfkill {
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
linux,input-type = <EV_SW>;
debounce-interval = <60>;
};
};
&leds {
wlan5g {
label = "green:wlan5g";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
&mtdparts {
partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_uboot_1fc00: macaddr@1fc00 {
compatible = "mac-base";
reg = <0x1fc00 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
partition@20000 {
label = "firmware";
compatible = "tplink,firmware";
reg = <0x020000 0x7d0000>;
};
partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
cal_art_1000: calibration@1000 {
reg = <0x1000 0x440>;
};
cal_art_5000: calibration@5000 {
reg = <0x5000 0x844>;
};
};
};
};
&eth0 {
nvmem-cells = <&macaddr_uboot_1fc00 1>;
nvmem-cell-names = "mac-address";
};
&eth1 {
nvmem-cells = <&macaddr_uboot_1fc00 0>;
nvmem-cell-names = "mac-address";
};
&pcie1 {
wifi@0,0 {
compatible = "qcom,ath10k";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&cal_art_5000>, <&macaddr_uboot_1fc00 (-1)>;
nvmem-cell-names = "calibration", "mac-address";
};
};
&wmac {
nvmem-cells = <&macaddr_uboot_1fc00 0>, <&cal_art_1000>;
nvmem-cell-names = "mac-address", "calibration";
};