openwrt/target/linux/ath79/dts/ar9344_netgear_r6100.dts

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "ar9344.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>

/ {
	model = "Netgear R6100";
	compatible = "netgear,r6100", "qca,ar9344";

	aliases {
		label-mac-device = &eth0;
		led-boot = &led_power_green;
		led-failsafe = &led_power_amber;
		led-running = &led_power_green;
		led-upgrade = &led_power_green;
	};

	gpio-export {
		compatible = "gpio-export";
		#size-cells = <0>;

		usb-power {
			gpio-export,name = "usb-power";
			gpio-export,output = <1>;
			gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
		};
	};

	keys {
		compatible = "gpio-keys";

		reset {
			label = "reset";
			linux,code = <KEY_RESTART>;
			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
			debounce-interval = <60>;
		};

		rfkill {
			label = "rfkill";
			linux,code = <KEY_RFKILL>;
			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
			debounce-interval = <60>;
		};

		wps {
			label = "wps";
			linux,code = <KEY_WPS_BUTTON>;
			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
			debounce-interval = <60>;
		};
	};

	leds {
		compatible = "gpio-leds";

		led_power_amber: power_amber {
			function = LED_FUNCTION_POWER;
			color = <LED_COLOR_ID_AMBER>;
			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
		};

		led_power_green: power_green {
			function = LED_FUNCTION_POWER;
			color = <LED_COLOR_ID_GREEN>;
			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
		};

		usb {
			function = LED_FUNCTION_USB;
			color = <LED_COLOR_ID_BLUE>;
			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
			trigger-sources = <&hub_port>;
			linux,default-trigger = "usbport";
		};

		wan_amber {
			function = LED_FUNCTION_WAN;
			color = <LED_COLOR_ID_AMBER>;
			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
		};

		wan_green {
			function = LED_FUNCTION_WAN;
			color = <LED_COLOR_ID_GREEN>;
			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
		};

		wlan {
			function = LED_FUNCTION_WLAN;
			color = <LED_COLOR_ID_BLUE>;
			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "phy1tpt";
		};
	};
};

&eth0 {
	status = "okay";

	phy-handle = <&swphy0>;

	nvmem-cells = <&macaddr_caldata_6>;
	nvmem-cell-names = "mac-address";

	gmac-config {
		device = <&gmac>;
		switch-phy-swap = <1>;
	};
};

&eth1 {
	status = "okay";

	nvmem-cells = <&macaddr_caldata_0>;
	nvmem-cell-names = "mac-address";
};

&nand {
	status = "okay";

	partitions {
		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;

		partition@0 {
			label = "u-boot";
			reg = <0x0000000 0x0020000>;
			read-only;
		};

		caldata: partition@20000 {
			label = "caldata";
			reg = <0x0020000 0x0040000>;
			read-only;

			nvmem-layout {
				compatible = "fixed-layout";
				#address-cells = <1>;
				#size-cells = <1>;

				cal_ath9k: calibration@1000 {
					reg = <0x1000 0x440>;
				};

				cal_ath10k: calibration@5000 {
					reg = <0x5000 0x844>;
				};

				macaddr_caldata_0: macaddr@0 {
					reg = <0x0 0x6>;
				};

				macaddr_caldata_6: macaddr@6 {
					reg = <0x6 0x6>;
				};

				macaddr_caldata_c: macaddr@c {
					reg = <0xc 0x6>;
				};
			};
		};

		partition@60000 {
			label = "caldata-backup";
			reg = <0x0060000 0x0040000>;
			read-only;
		};

		partition@a0000 {
			label = "config";
			reg = <0x00a0000 0x0080000>;
			read-only;
		};

		partition@120000 {
			label = "pot";
			reg = <0x0120000 0x0080000>;
			read-only;
		};

		partition@1a0000 {
			label = "kernel";
			reg = <0x01a0000 0x0400000>;
		};

		partition@5a0000 {
			label = "ubi";
			reg = <0x05a0000 0x7560000>;
		};

		partition@7b00000 {
			label = "language";
			reg = <0x7b00000 0x0200000>;
			read-only;
		};

		partition@7d00000 {
			label = "traffic_meter";
			reg = <0x7d00000 0x0300000>;
			read-only;
		};
	};
};

&pcie {
	status = "okay";

	wifi@0,0 {
		compatible = "qcom,ath10k";
		reg = <0x0000 0 0 0 0>;

		nvmem-cells = <&cal_ath10k>, <&macaddr_caldata_c>;
		nvmem-cell-names = "calibration", "mac-address";
	};
};

&ref {
	clock-frequency = <40000000>;
};

&usb {
	status = "okay";
};

&usb_phy {
	status = "okay";
};

&wmac {
	status = "okay";

	nvmem-cells = <&cal_ath9k>;
	nvmem-cell-names = "calibration";
};