openwrt/target/linux/ath79/dts/ar7161_jjplus_ja76pf2.dts
Rosen Penev 9783340af9 ath79: ar: convert to nvmem-layout
Will allow removing deprecated mac-address-increment.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2023-11-25 21:34:18 -08:00

179 lines
2.8 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar7100.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/mtd/partitions/uimage.h>
/ {
model = "jjPlus JA76PF2";
compatible = "jjplus,ja76pf2", "qca,ar7161";
memory@0 {
device_type = "memory";
reg = <0x0 0x4000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8";
};
aliases {
led-boot = &led_d2;
led-failsafe = &led_d2;
led-running = &led_d2;
led-upgrade = &led_d2;
};
i2c {
compatible = "i2c-gpio";
sda-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
scl-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
sensor@48 {
compatible = "microchip,tcn75";
reg = <0x48>;
};
};
leds {
compatible = "gpio-leds";
led_d2: d2 {
label = "green:d2";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
d3 {
label = "green:d3";
gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
};
d4 {
label = "green:d4";
gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys";
sw1 {
label = "sw1";
linux,code = <KEY_RESTART>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
sw2 {
label = "sw2";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "rgmii";
};
phy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "rgmii";
};
};
&eth0 {
status = "okay";
nvmem-cells = <&macaddr_lan>;
nvmem-cell-names = "mac-address";
phy-handle = <&phy0>;
};
&eth1 {
status = "okay";
nvmem-cells = <&macaddr_wan>;
nvmem-cell-names = "mac-address";
phy-handle = <&phy4>;
};
&pcie0 {
status = "okay";
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "RedBoot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "loader";
reg = <0x040000 0x020000>;
};
partition@60000 {
label = "firmware";
reg = <0x060000 0xf80000>;
compatible = "openwrt,uimage", "denx,uimage";
openwrt,ih-magic = <IH_MAGIC_OKLI>;
};
partition@fe0000 {
label = "FIS directory";
reg = <0xfe0000 0x00f000>;
read-only;
};
partition@fef000 {
label = "RedBoot config";
reg = <0xfef000 0x001000>;
read-only;
};
partition@ff0000 {
label = "Atheros Board Data";
reg = <0xff0000 0x10000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_wan: macaddr@1000 {
reg = <0x1000 0x6>;
};
macaddr_lan: macaddr@1006 {
reg = <0x1006 0x6>;
};
};
};
};
};
};