openwrt/target/linux/bcm27xx/patches-5.15/950-0890-hwmon-emc2305-add-support-for-EMC2301-2-3-5-RPM-base.patch

From 23395c6df3c8ef7b6e43b4968de402169ec7c755 Mon Sep 17 00:00:00 2001
From: Michael Shych <michaelsh@nvidia.com>
Date: Sat, 30 Apr 2022 14:49:03 +0300
Subject: [PATCH] hwmon: (emc2305) add support for EMC2301/2/3/5
 RPM-based PWM Fan Speed Controller.

Submitted to linux-hwmon mailing list at
https://patchwork.kernel.org/project/linux-hwmon/patch/20220430114905.53448-2-michaelsh@nvidia.com/

Add driver for Microchip EMC2301/2/3/5 RPM-based PWM Fan Speed Controller.
Modify Makefile and Kconfig to support Microchip EMC2305 RPM-based
PWM Fan Speed Controller.

Signed-off-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
---
 drivers/hwmon/Kconfig   |  13 +
 drivers/hwmon/Makefile  |   1 +
 drivers/hwmon/emc2305.c | 629 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 643 insertions(+)
 create mode 100644 drivers/hwmon/emc2305.c

--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1685,6 +1685,19 @@ config SENSORS_EMC2103
 	  This driver can also be built as a module. If so, the module
 	  will be called emc2103.
 
+config SENSORS_EMC2305
+	tristate "Microchip EMC2305 and compatible EMC2301/2/3"
+	depends on I2C
+	imply THERMAL
+	help
+	  If you say yes here you get support for the Microchip EMC2305
+	  fan controller chips.
+	  The Microchip EMC2305 is a fan controller for up to 5 fans.
+	  Fan rotation speeds are reported in RPM.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called emc2305.
+
 config SENSORS_EMC6W201
 	tristate "SMSC EMC6W201"
 	depends on I2C
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -67,6 +67,7 @@ obj-$(CONFIG_SENSORS_DS620)	+= ds620.o
 obj-$(CONFIG_SENSORS_DS1621)	+= ds1621.o
 obj-$(CONFIG_SENSORS_EMC1403)	+= emc1403.o
 obj-$(CONFIG_SENSORS_EMC2103)	+= emc2103.o
+obj-$(CONFIG_SENSORS_EMC2305)	+= emc2305.o
 obj-$(CONFIG_SENSORS_EMC6W201)	+= emc6w201.o
 obj-$(CONFIG_SENSORS_F71805F)	+= f71805f.o
 obj-$(CONFIG_SENSORS_F71882FG)	+= f71882fg.o
--- /dev/null
+++ b/drivers/hwmon/emc2305.c
@@ -0,0 +1,629 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Hardware monitoring driver for EMC2305 fan controller
+ *
+ * Copyright (C) 2022 Nvidia Technologies Ltd and Delta Networks, Inc.
+ */
+
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/thermal.h>
+#include <linux/version.h>
+
+static const unsigned short
+emc2305_normal_i2c[] = { 0x27, 0x2c, 0x2d, 0x2e, 0x2f, 0x4c, 0x4d, I2C_CLIENT_END };
+
+#define EMC2305_REG_DRIVE_FAIL_STATUS	0x27
+#define EMC2305_REG_DEVICE		0xfd
+#define EMC2305_REG_VENDOR		0xfe
+#define EMC2305_FAN_MAX			0xff
+#define EMC2305_FAN_MIN			0x00
+#define EMC2305_FAN_MAX_STATE		10
+#define EMC2305_DEVICE			0x34
+#define EMC2305_VENDOR			0x5d
+#define EMC2305_REG_PRODUCT_ID		0xfd
+#define EMC2305_TACH_REGS_UNUSE_BITS	3
+#define EMC2305_TACH_CNT_MULTIPLIER	0x02
+#define EMC2305_PWM_MAX			5
+#define EMC2305_PWM_CHNL_CMN		0
+
+#define EMC2305_PWM_DUTY2STATE(duty, max_state, pwm_max) \
+	(DIV_ROUND_CLOSEST((duty) * (max_state), (pwm_max)))
+#define EMC2305_PWM_STATE2DUTY(state, max_state, pwm_max) \
+	(DIV_ROUND_CLOSEST((state) * (pwm_max), (max_state)))
+
+/* Factor by equations [2] and [3] from data sheet; valid for fans where the number of edges
+ * equal (poles * 2 + 1).
+ */
+#define EMC2305_RPM_FACTOR		3932160
+
+#define EMC2305_REG_FAN_DRIVE(n) (0x30 + 0x10 * (n))
+#define EMC2305_REG_FAN_MIN_DRIVE(n) (0x38 + 0x10 * (n))
+#define EMC2305_REG_FAN_TACH(n) (0x3e + 0x10 * (n))
+
+enum emc230x_product_id {
+	EMC2305 = 0x34,
+	EMC2303 = 0x35,
+	EMC2302 = 0x36,
+	EMC2301 = 0x37,
+};
+
+static const struct i2c_device_id emc2305_ids[] = {
+	{ "emc2305", 0 },
+	{ "emc2303", 0 },
+	{ "emc2302", 0 },
+	{ "emc2301", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, emc2305_ids);
+
+static const struct of_device_id emc2305_dt_ids[] = {
+	{ .compatible = "smsc,emc2305" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, emc2305_dt_ids);
+
+/**
+ * @cdev: cooling device;
+ * @curr_state: cooling current state;
+ * @last_hwmon_state: last cooling state updated by hwmon subsystem;
+ * @last_thermal_state: last cooling state updated by thermal subsystem;
+ *
+ * The 'last_hwmon_state' and 'last_thermal_state' fields are provided to support fan low limit
+ * speed feature. The purpose of this feature is to provides ability to limit fan speed
+ * according to some system wise considerations, like absence of some replaceable units (PSU or
+ * line cards), high system ambient temperature, unreliable transceivers temperature sensing or
+ * some other factors which indirectly impacts system's airflow
+ * Fan low limit feature is supported through 'hwmon' interface: 'hwmon' 'pwm' attribute is
+ * used for setting low limit for fan speed in case 'thermal' subsystem is configured in
+ * kernel. In this case setting fan speed through 'hwmon' will never let the 'thermal'
+ * subsystem to select a lower duty cycle than the duty cycle selected with the 'pwm'
+ * attribute.
+ * From other side, fan speed is to be updated in hardware through 'pwm' only in case the
+ * requested fan speed is above last speed set by 'thermal' subsystem, otherwise requested fan
+ * speed will be just stored with no PWM update.
+ */
+struct emc2305_cdev_data {
+	struct thermal_cooling_device *cdev;
+	unsigned int cur_state;
+	unsigned long last_hwmon_state;
+	unsigned long last_thermal_state;
+};
+
+/**
+ * @client: i2c client;
+ * @hwmon_dev: hwmon device;
+ * @max_state: maximum cooling state of the cooling device;
+ * @pwm_max: maximum PWM;
+ * @pwm_min: minimum PWM;
+ * @pwm_channel: maximum number of PWM channels;
+ * @cdev_data: array of cooling devices data;
+ */
+struct emc2305_data {
+	struct i2c_client *client;
+	struct device *hwmon_dev;
+	u8 max_state;
+	u8 pwm_max;
+	u8 pwm_min;
+	u8 pwm_num;
+	u8 pwm_channel;
+	struct emc2305_cdev_data cdev_data[EMC2305_PWM_MAX];
+};
+
+static char *emc2305_fan_name[] = {
+	"emc2305_fan",
+	"emc2305_fan1",
+	"emc2305_fan2",
+	"emc2305_fan3",
+	"emc2305_fan4",
+	"emc2305_fan5",
+};
+
+static int emc2305_get_max_channel(struct emc2305_data *data)
+{
+	if (data->pwm_channel == EMC2305_PWM_CHNL_CMN)
+		return data->pwm_num;
+	else
+		return data->pwm_channel;
+}
+
+static int emc2305_get_cdev_idx(struct thermal_cooling_device *cdev)
+{
+	struct emc2305_data *data = cdev->devdata;
+	size_t len = strlen(cdev->type);
+	int ret;
+
+	if (len <= 0)
+		return -EINVAL;
+
+	/* Retuns index of cooling device 0..4 in case of separate PWM setting.
+	 * Zero index is used in case of one common PWM setting.
+	 * If the mode is set as EMC2305_PWM_CHNL_CMN, all PWMs are to be bound
+	 * to the common thermal zone and should work at the same speed
+	 * to perform cooling for the same thermal junction.
+	 * Otherwise, return specific channel that will be used in bound
+	 * related PWM to the thermal zone.
+	 */
+	if (data->pwm_channel == EMC2305_PWM_CHNL_CMN)
+		return 0;
+
+	ret = cdev->type[len - 1];
+	switch (ret) {
+	case '1' ... '5':
+		return ret - '1';
+	default:
+		break;
+	}
+	return -EINVAL;
+}
+
+static int emc2305_get_cur_state(struct thermal_cooling_device *cdev, unsigned long *state)
+{
+	int cdev_idx;
+	struct emc2305_data *data = cdev->devdata;
+
+	cdev_idx = emc2305_get_cdev_idx(cdev);
+	if (cdev_idx < 0)
+		return cdev_idx;
+
+	*state = data->cdev_data[cdev_idx].cur_state;
+	return 0;
+}
+
+static int emc2305_get_max_state(struct thermal_cooling_device *cdev, unsigned long *state)
+{
+	struct emc2305_data *data = cdev->devdata;
+	*state = data->max_state;
+	return 0;
+}
+
+static int emc2305_set_cur_state(struct thermal_cooling_device *cdev, unsigned long state)
+{
+	int cdev_idx;
+	struct emc2305_data *data = cdev->devdata;
+	struct i2c_client *client = data->client;
+	u8 val, i;
+	
+	if (state > data->max_state)
+		return -EINVAL;
+
+	cdev_idx =  emc2305_get_cdev_idx(cdev);
+	if (cdev_idx < 0)
+		return cdev_idx;
+
+	/* Save thermal state. */
+	data->cdev_data[cdev_idx].last_thermal_state = state;
+	state = max_t(unsigned long, state, data->cdev_data[cdev_idx].last_hwmon_state);
+
+	val = EMC2305_PWM_STATE2DUTY(state, data->max_state, data->pwm_max);
+	if (val > EMC2305_FAN_MAX)
+		return -EINVAL;
+
+	data->cdev_data[cdev_idx].cur_state = state;
+	if (data->pwm_channel == EMC2305_PWM_CHNL_CMN)
+	/* Set the same PWM value in all channels 
+	 * if common PWM channel is used.
+	 */
+		for (i = 0; i < data->pwm_num; i++)
+			i2c_smbus_write_byte_data(client, EMC2305_REG_FAN_DRIVE(i), val);
+	else
+		i2c_smbus_write_byte_data(client, EMC2305_REG_FAN_DRIVE(cdev_idx), val);
+	
+	return 0;
+}
+
+static const struct thermal_cooling_device_ops emc2305_cooling_ops = {
+	.get_max_state = emc2305_get_max_state,
+	.get_cur_state = emc2305_get_cur_state,
+	.set_cur_state = emc2305_set_cur_state,
+};
+
+static int emc2305_show_fault(struct device *dev, int channel)
+{
+	struct emc2305_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	int status_reg;
+
+	status_reg = i2c_smbus_read_byte_data(client, EMC2305_REG_DRIVE_FAIL_STATUS);
+	return status_reg & (1 << channel) ? 1 : 0;
+}
+
+static int emc2305_show_fan(struct device *dev, int channel)
+{
+	struct emc2305_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	int ret;
+
+	ret = i2c_smbus_read_word_swapped(client, EMC2305_REG_FAN_TACH(channel));
+	if (ret < 0)
+		return ret;
+
+	ret = ret >> EMC2305_TACH_REGS_UNUSE_BITS;
+	return EMC2305_RPM_FACTOR * EMC2305_TACH_CNT_MULTIPLIER / (ret > 0 ? ret : 1);
+}
+
+static int emc2305_show_pwm(struct device *dev, int channel)
+{
+	struct emc2305_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+
+	return i2c_smbus_read_byte_data(client, EMC2305_REG_FAN_DRIVE(channel));
+}
+
+static int emc2305_set_pwm(struct device *dev, long val, int channel)
+{
+	struct emc2305_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+
+	if (val < data->pwm_min || val > data->pwm_max)
+		return -EINVAL;
+
+	i2c_smbus_write_byte_data(client, EMC2305_REG_FAN_DRIVE(channel), val);
+	data->cdev_data[channel].cur_state = EMC2305_PWM_DUTY2STATE(val, data->max_state,
+								    data->pwm_max);
+	return 0;
+}
+
+static int emc2305_get_tz_of(struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	struct emc2305_data *data = dev_get_drvdata(dev);
+	int ret = 0;
+
+	/* OF parameters are optional - overwrite default setting 
+	 * if some of them are provided.
+	 */
+
+	if (of_find_property(np, "emc2305,cooling-levels", NULL)) {
+		ret = of_property_read_u8(np, "emc2305,cooling-levels", &data->max_state);
+		if (ret)
+			return ret;
+	}
+
+	if (of_find_property(np, "emc2305,pwm-max", NULL)) {
+		ret = of_property_read_u8(np, "emc2305,pwm-max", &data->pwm_max);
+		if (ret)
+			return ret;
+	}
+
+	if (of_find_property(np, "emc2305,pwm-min", NULL)) {
+		ret = of_property_read_u8(np, "emc2305,pwm-min", &data->pwm_min);
+		if (ret)
+			return ret;
+	}
+
+	/* Not defined or 0 means one thermal zone over all colling devices. 
+	 * Otherwise - separted thermal zones for each PWM channel.
+	 */
+	if (of_find_property(np, "emc2305,pwm-channel", NULL)) {
+		ret = of_property_read_u8(np, "emc2305,pwm-channel", &data->pwm_channel);
+		if (ret)
+			return ret;
+	}
+
+	return ret;
+}
+
+static int emc2305_set_single_tz(struct device *dev, int idx)
+{
+	struct emc2305_data *data = dev_get_drvdata(dev);
+	long pwm = data->pwm_max;
+	int cdev_idx;
+	
+	cdev_idx = (idx) ? idx - 1 : 0;
+
+	if (dev->of_node)
+		data->cdev_data[cdev_idx].cdev =
+			devm_thermal_of_cooling_device_register(dev, dev->of_node,
+								emc2305_fan_name[idx], data,
+								&emc2305_cooling_ops);
+	else
+		data->cdev_data[cdev_idx].cdev =
+			thermal_cooling_device_register(emc2305_fan_name[idx], data, 
+							&emc2305_cooling_ops);
+
+	if (IS_ERR(data->cdev_data[cdev_idx].cdev)) {
+		dev_err(dev, "Failed to register cooling device %s\n", emc2305_fan_name[idx]);
+		return PTR_ERR(data->cdev_data[cdev_idx].cdev);
+	}
+	emc2305_set_pwm(dev, pwm, cdev_idx);
+	data->cdev_data[cdev_idx].cur_state = data->max_state;
+	/* Set minimal PWM speed. */
+	data->cdev_data[cdev_idx].last_hwmon_state = EMC2305_PWM_DUTY2STATE(data->pwm_min,
+									    data->max_state,
+									    data->pwm_max);
+	return 0;
+}
+
+static int emc2305_set_tz(struct device *dev)
+{
+	struct emc2305_data *data = dev_get_drvdata(dev);
+	int i, ret;
+
+	if (data->pwm_channel == EMC2305_PWM_CHNL_CMN)
+		return emc2305_set_single_tz(dev, 0);
+
+	for (i = 0; i < data->pwm_channel; i++) {
+		ret = emc2305_set_single_tz(dev, i + 1);
+		if (ret)
+			goto thermal_cooling_device_register_fail;
+	}
+	return 0;
+
+thermal_cooling_device_register_fail:
+	emc2305_unset_tz(dev);
+	return ret;
+}
+
+static void emc2305_unset_tz(struct device *dev)
+{
+	struct emc2305_data *data = dev_get_drvdata(dev);
+	int i;
+
+	/* Unregister cooling device in case they have been registered by
+	 * thermal_cooling_device_unregister(). No need for clean-up flow in case they 
+	 * have been registered by devm_thermal_of_cooling_device_register()
+	 */
+	if (!dev->of_node) {
+		for (i = 0; i < EMC2305_PWM_MAX; i++)
+			if (data->cdev_data[i].cdev)
+				thermal_cooling_device_unregister(data->cdev_data[i].cdev);
+	}
+}
+
+static umode_t
+emc2305_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr, int channel)
+{
+	int max_channel = emc2305_get_max_channel((struct emc2305_data *)data);
+
+	/* Don't show channels which are not physically connected. */
+	if ((channel + 1) > max_channel)
+		return 0;
+	switch (type) {
+	case hwmon_fan:
+		switch (attr) {
+		case hwmon_fan_input:
+			return 0444;
+		case hwmon_fan_fault:
+			return 0444;
+		default:
+			break;
+		}
+		break;
+	case hwmon_pwm:
+		switch (attr) {
+		case hwmon_pwm_input:
+			return 0644;
+		default:
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+};
+
+static int
+emc2305_write(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, long val)
+{
+	struct emc2305_data *data = dev_get_drvdata(dev);
+
+	switch (type) {
+	case hwmon_pwm:
+		switch (attr) {
+		case hwmon_pwm_input:
+			/* If thermal is configured - handle PWM limit setting. */
+			if (IS_REACHABLE(CONFIG_THERMAL)) {
+				data->cdev_data[channel].last_hwmon_state =
+					EMC2305_PWM_DUTY2STATE(val, data->max_state, data->pwm_max);
+				/* Update PWM only in case requested state is not less than the
+				 * last thermal state.
+				 */
+				if (data->cdev_data[channel].last_hwmon_state >=
+				    data->cdev_data[channel].last_thermal_state)
+					return emc2305_set_cur_state(data->cdev_data[channel].cdev,
+							data->cdev_data[channel].last_hwmon_state);
+				return 0;
+			}
+			return emc2305_set_pwm(dev, val, channel);
+		default:
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+
+	return -EOPNOTSUPP;
+};
+
+static int
+emc2305_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, long *val)
+{
+	int ret;
+
+	switch (type) {
+	case hwmon_fan:
+		switch (attr) {
+		case hwmon_fan_input:
+			ret = emc2305_show_fan(dev, channel);
+			if (ret < 0)
+				return ret;
+			*val = ret;
+			return 0;
+		case hwmon_fan_fault:
+			ret = emc2305_show_fault(dev, channel);
+			if (ret < 0)
+				return ret;
+			*val = ret;
+			return 0;
+		default:
+			break;
+		}
+		break;
+	case hwmon_pwm:
+		switch (attr) {
+		case hwmon_pwm_input:
+			ret = emc2305_show_pwm(dev, channel);
+			if (ret < 0)
+				return ret;
+			*val = ret;
+			return 0;
+		default:
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+
+	return -EOPNOTSUPP;
+};
+
+static const struct hwmon_ops emc2305_ops = {
+	.is_visible = emc2305_is_visible,
+	.read = emc2305_read,
+	.write = emc2305_write,
+};
+
+static const struct hwmon_channel_info *emc2305_info[] = {
+	HWMON_CHANNEL_INFO(fan,
+			   HWMON_F_INPUT | HWMON_F_FAULT,
+			   HWMON_F_INPUT | HWMON_F_FAULT,
+			   HWMON_F_INPUT | HWMON_F_FAULT,
+			   HWMON_F_INPUT | HWMON_F_FAULT,
+			   HWMON_F_INPUT | HWMON_F_FAULT),
+	HWMON_CHANNEL_INFO(pwm,
+			   HWMON_PWM_INPUT,
+			   HWMON_PWM_INPUT,
+			   HWMON_PWM_INPUT,
+			   HWMON_PWM_INPUT,
+			   HWMON_PWM_INPUT),
+	NULL
+};
+
+static const struct hwmon_chip_info emc2305_chip_info = {
+	.ops = &emc2305_ops,
+	.info = emc2305_info,
+};
+
+static int emc2305_identify(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct emc2305_data *data = i2c_get_clientdata(client);
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(client, EMC2305_REG_PRODUCT_ID);
+	if (ret < 0)
+		return ret;
+
+	switch (ret) {
+	case EMC2305:
+		data->pwm_num = 5;
+		break;
+	case EMC2303:
+		data->pwm_num = 3;
+		break;
+	case EMC2302:
+		data->pwm_num = 2;
+		break;
+	case EMC2301:
+		data->pwm_num = 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int emc2305_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	struct device *dev = &client->dev;
+	struct emc2305_data *data;
+	int vendor, device;
+	int ret;
+	int i;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA))
+		return -ENODEV;
+
+	vendor = i2c_smbus_read_byte_data(client, EMC2305_REG_VENDOR);
+	if (vendor != EMC2305_VENDOR)
+		return -ENODEV;
+
+	device = i2c_smbus_read_byte_data(client, EMC2305_REG_DEVICE);
+	if (device != EMC2305_DEVICE)
+		return -ENODEV;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, data);
+	data->client = client;
+
+	ret = emc2305_identify(dev);
+	if (ret)
+		return ret;
+
+	data->max_state = EMC2305_FAN_MAX_STATE;
+	data->pwm_max = EMC2305_FAN_MAX;
+	data->pwm_min = EMC2305_FAN_MIN;
+	data->pwm_channel = EMC2305_PWM_CHNL_CMN;
+	if (dev->of_node) {
+		ret = emc2305_get_tz_of(dev);
+		if (ret < 0)
+			return ret;
+	}
+
+	data->hwmon_dev = devm_hwmon_device_register_with_info(dev, "emc2305", data,
+							       &emc2305_chip_info, NULL);
+	if (IS_ERR(data->hwmon_dev))
+		return PTR_ERR(data->hwmon_dev);
+
+	if (IS_REACHABLE(CONFIG_THERMAL)) {
+		ret = emc2305_set_tz(dev);
+		if (ret != 0)
+			return ret;
+	}
+
+	for (i = 0; i < data->pwm_num; i++)
+		i2c_smbus_write_byte_data(client, EMC2305_REG_FAN_MIN_DRIVE(i), data->pwm_min);
+
+	return 0;
+}
+
+static int emc2305_remove(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+
+	if (IS_REACHABLE(CONFIG_THERMAL))
+		emc2305_unset_tz(dev);
+	return 0;
+}
+
+static struct i2c_driver emc2305_driver = {
+	.class  = I2C_CLASS_HWMON,
+	.driver = {
+		.name = "emc2305",
+		.of_match_table = emc2305_dt_ids,
+	},
+	.probe    = emc2305_probe,
+	.remove	  = emc2305_remove,
+	.id_table = emc2305_ids,
+	.address_list = emc2305_normal_i2c,
+};
+
+module_i2c_driver(emc2305_driver);
+
+MODULE_AUTHOR("Nvidia");
+MODULE_DESCRIPTION("Microchip EMC2305 fan controller driver");
+MODULE_LICENSE("GPL");