mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 10:08:59 +00:00
ca5c695a45
Deleted following upstreamed patches: bcm27xx: 950-0006-drm-vc4-hdmi-Fix-HPD-GPIO-detection.patch bcm27xx: 950-0420-drm-vc4-Adopt-the-dma-configuration-from-the-HVS-or-.patch bcm27xx: 950-0425-drm-vc4-A-present-but-empty-dmas-disables-audio.patch bcm27xx: 950-0432-vc4-drm-Avoid-full-hdmi-audio-fifo-writes.patch bcm27xx: 950-0433-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch bcm27xx: 950-0435-drm-vc4-Correct-pixel-order-for-DSI0.patch bcm27xx: 950-0436-drm-vc4-Register-dsi0-as-the-correct-vc4-encoder-typ.patch bcm27xx: 950-0437-drm-vc4-Fix-dsi0-interrupt-support.patch bcm27xx: 950-0438-drm-vc4-Add-correct-stop-condition-to-vc4_dsi_encode.patch bcm27xx: 950-0443-drm-vc4-Fix-timings-for-interlaced-modes.patch bcm27xx: 950-0445-drm-vc4-Fix-margin-calculations-for-the-right-bottom.patch bcm27xx: 950-0475-drm-vc4-Reset-HDMI-MISC_CONTROL-register.patch bcm27xx: 950-0476-drm-vc4-Release-workaround-buffer-and-DMA-in-error-p.patch bcm27xx: 950-0477-drm-vc4-Correct-DSI-divider-calculations.patch bcm27xx: 950-0664-drm-vc4-dsi-Correct-max-divider-to-255-not-7.patch bcm53xx: 072-next-ARM_dts_BCM53015-add-mr26.patch mediatek: 920-linux-next-dts-mt7622-bpi-r64-fix-wps-button.patch Manually rebased following patches: bcm27xx: 950-0004-drm-vc4-hdmi-Remove-the-DDC-probing-for-status-detec.patch bcm27xx: 950-0700-net-phy-lan87xx-Decrease-phy-polling-rate.patch bcm27xx: 950-0711-drm-vc4-Rename-bridge-to-out_bridge.patch bcm27xx: 950-0713-drm-vc4-Remove-splitting-the-bridge-chain-from-the-d.patch bcm27xx: 950-0715-drm-vc4-Convert-vc4_dsi-to-using-a-bridge-instead-of.patch bcm27xx: 950-0787-vc4-drm-vc4_plane-Keep-fractional-source-coords-insi.patch bcm27xx: 950-0914-mmc-block-Don-t-do-single-sector-reads-during-recove.patch Runtime tested on turris-omnia and glinet-b1300. Tested-by: John Audia <therealgraysky@proton.me> [bcm2711/RPi4B, mt7622/RT3200] Signed-off-by: Petr Štetiar <ynezz@true.cz>
61 lines
2.6 KiB
Diff
61 lines
2.6 KiB
Diff
From b30b747d76946fb176bb4b044c830415d551b7bb Mon Sep 17 00:00:00 2001
|
|
From: Maxime Ripard <maxime@cerno.tech>
|
|
Date: Thu, 19 Aug 2021 13:50:12 +0200
|
|
Subject: [PATCH] drm/vc4: hdmi: Actually check for the connector
|
|
status in hotplug
|
|
|
|
The drm_helper_hpd_irq_event() documentation states that this function
|
|
is "useful for drivers which can't or don't track hotplug interrupts for
|
|
each connector." and that "Drivers which support hotplug interrupts for
|
|
each connector individually and which have a more fine-grained detect
|
|
logic should bypass this code and directly call
|
|
drm_kms_helper_hotplug_event()". This is thus what we ended-up doing.
|
|
|
|
However, what this actually means, and is further explained in the
|
|
drm_kms_helper_hotplug_event() documentation, is that
|
|
drm_kms_helper_hotplug_event() should be called by drivers that can
|
|
track the connection status change, and if it has changed we should call
|
|
that function.
|
|
|
|
This underlying expectation we failed to provide is that the caller of
|
|
drm_kms_helper_hotplug_event() should call drm_helper_probe_detect() to
|
|
probe the new status of the connector.
|
|
|
|
Since we didn't do it, it meant that even though we were sending the
|
|
notification to user-space and the DRM clients that something changed we
|
|
never probed or updated our internal connector status ourselves.
|
|
|
|
This went mostly unnoticed since the detect callback usually doesn't
|
|
have any side-effect. Also, if we were using the DRM fbdev emulation
|
|
(which is a DRM client), or any user-space application that can deal
|
|
with hotplug events, chances are they would react to the hotplug event
|
|
by probing the connector status eventually.
|
|
|
|
However, now that we have to enable the scrambler in detect() if it was
|
|
enabled it has a side effect, and an application such as Kodi or
|
|
modetest doesn't deal with hotplug events. This resulted with a black
|
|
screen when Kodi or modetest was running when a screen was disconnected
|
|
and then reconnected, or switched off and on.
|
|
|
|
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
---
|
|
drivers/gpu/drm/vc4/vc4_hdmi.c | 5 +++--
|
|
1 file changed, 3 insertions(+), 2 deletions(-)
|
|
|
|
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
|
|
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
|
|
@@ -1801,10 +1801,11 @@ static void vc4_hdmi_audio_exit(struct v
|
|
static irqreturn_t vc4_hdmi_hpd_irq_thread(int irq, void *priv)
|
|
{
|
|
struct vc4_hdmi *vc4_hdmi = priv;
|
|
- struct drm_device *dev = vc4_hdmi->connector.dev;
|
|
+ struct drm_connector *connector = &vc4_hdmi->connector;
|
|
+ struct drm_device *dev = connector->dev;
|
|
|
|
if (dev && dev->registered)
|
|
- drm_kms_helper_hotplug_event(dev);
|
|
+ drm_connector_helper_hpd_irq_event(connector);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|