mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 22:23:27 +00:00
fce21ae4cc
Right now all brcm2708 patches are extracted from the non-mainline raspberrypi/linux git tree. Many of them are hacks and/or are unneeded in LEDE. Raspberry Pi is getting better and better mainline support so it would be nice to finally start maintaining patches in a cleaner way: 1) Backport patches accepted in upstream tree 2) Start using upstream drivers 3) Pick only these patches that are needed for more complete support Handling above tasks requires grouping patches - ideally using the same prefixes as generic ones. It means we should rename existing patches to use some high prefix. This will allow e.g. use 0xx for backported code. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Stijn Tintel <stijn@linux-ipv6.be>
200 lines
5.5 KiB
Diff
200 lines
5.5 KiB
Diff
From 9874eb6473865b9d975a7c3756099955e7454e21 Mon Sep 17 00:00:00 2001
|
|
From: popcornmix <popcornmix@gmail.com>
|
|
Date: Sun, 12 May 2013 12:24:19 +0100
|
|
Subject: [PATCH] Main bcm2708/bcm2709 linux port
|
|
MIME-Version: 1.0
|
|
Content-Type: text/plain; charset=UTF-8
|
|
Content-Transfer-Encoding: 8bit
|
|
|
|
Signed-off-by: popcornmix <popcornmix@gmail.com>
|
|
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
|
|
|
|
bcm2709: Drop platform smp and timer init code
|
|
|
|
irq-bcm2836 handles this through these functions:
|
|
bcm2835_init_local_timer_frequency()
|
|
bcm2836_arm_irqchip_smp_init()
|
|
|
|
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
|
|
|
|
bcm270x: Use watchdog for reboot/poweroff
|
|
|
|
The watchdog driver already has support for reboot/poweroff.
|
|
Make use of this and remove the code from the platform files.
|
|
|
|
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
|
|
---
|
|
arch/arm/mach-bcm/Kconfig | 1 +
|
|
arch/arm/mach-bcm/board_bcm2835.c | 17 +++++++++++++++++
|
|
arch/arm/mm/proc-v6.S | 15 ++++++++++++---
|
|
drivers/irqchip/irq-bcm2835.c | 7 ++++++-
|
|
drivers/mailbox/bcm2835-mailbox.c | 18 ++++++++++++++++--
|
|
5 files changed, 52 insertions(+), 6 deletions(-)
|
|
|
|
--- a/arch/arm/mach-bcm/Kconfig
|
|
+++ b/arch/arm/mach-bcm/Kconfig
|
|
@@ -155,6 +155,7 @@ config ARCH_BCM2835
|
|
select FIQ
|
|
select PINCTRL
|
|
select PINCTRL_BCM2835
|
|
+ select MFD_SYSCON if ARCH_MULTI_V7
|
|
help
|
|
This enables support for the Broadcom BCM2835 and BCM2836 SoCs.
|
|
This SoC is used in the Raspberry Pi and Roku 2 devices.
|
|
--- a/arch/arm/mach-bcm/board_bcm2835.c
|
|
+++ b/arch/arm/mach-bcm/board_bcm2835.c
|
|
@@ -16,17 +16,21 @@
|
|
#include <linux/irqchip.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/clk/bcm2835.h>
|
|
+#include <linux/broadcom/vc_cma.h>
|
|
#include <asm/system_info.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
+#include <linux/dma-mapping.h>
|
|
+
|
|
static void __init bcm2835_init(void)
|
|
{
|
|
struct device_node *np = of_find_node_by_path("/system");
|
|
u32 val;
|
|
u64 val64;
|
|
|
|
+ vc_cma_early_init();
|
|
bcm2835_init_clocks();
|
|
|
|
if (!of_property_read_u32(np, "linux,revision", &val))
|
|
@@ -35,6 +39,17 @@ static void __init bcm2835_init(void)
|
|
system_serial_low = val64;
|
|
}
|
|
|
|
+static void __init bcm2835_init_early(void)
|
|
+{
|
|
+ /* dwc_otg needs this for bounce buffers on non-aligned transfers */
|
|
+ init_dma_coherent_pool_size(SZ_1M);
|
|
+}
|
|
+
|
|
+static void __init bcm2835_board_reserve(void)
|
|
+{
|
|
+ vc_cma_reserve();
|
|
+}
|
|
+
|
|
static const char * const bcm2835_compat[] = {
|
|
#ifdef CONFIG_ARCH_MULTI_V6
|
|
"brcm,bcm2835",
|
|
@@ -47,5 +62,7 @@ static const char * const bcm2835_compat
|
|
|
|
DT_MACHINE_START(BCM2835, "BCM2835")
|
|
.init_machine = bcm2835_init,
|
|
+ .reserve = bcm2835_board_reserve,
|
|
+ .init_early = bcm2835_init_early,
|
|
.dt_compat = bcm2835_compat
|
|
MACHINE_END
|
|
--- a/arch/arm/mm/proc-v6.S
|
|
+++ b/arch/arm/mm/proc-v6.S
|
|
@@ -73,10 +73,19 @@ ENDPROC(cpu_v6_reset)
|
|
*
|
|
* IRQs are already disabled.
|
|
*/
|
|
+
|
|
+/* See jira SW-5991 for details of this workaround */
|
|
ENTRY(cpu_v6_do_idle)
|
|
- mov r1, #0
|
|
- mcr p15, 0, r1, c7, c10, 4 @ DWB - WFI may enter a low-power mode
|
|
- mcr p15, 0, r1, c7, c0, 4 @ wait for interrupt
|
|
+ .align 5
|
|
+ mov r1, #2
|
|
+1: subs r1, #1
|
|
+ nop
|
|
+ mcreq p15, 0, r1, c7, c10, 4 @ DWB - WFI may enter a low-power mode
|
|
+ mcreq p15, 0, r1, c7, c0, 4 @ wait for interrupt
|
|
+ nop
|
|
+ nop
|
|
+ nop
|
|
+ bne 1b
|
|
ret lr
|
|
|
|
ENTRY(cpu_v6_dcache_clean_area)
|
|
--- a/drivers/irqchip/irq-bcm2835.c
|
|
+++ b/drivers/irqchip/irq-bcm2835.c
|
|
@@ -54,7 +54,9 @@
|
|
#include <linux/regmap.h>
|
|
|
|
#include <asm/exception.h>
|
|
+#ifndef CONFIG_ARM64
|
|
#include <asm/mach/irq.h>
|
|
+#endif
|
|
|
|
/* Put the bank and irq (32 bits) into the hwirq */
|
|
#define MAKE_HWIRQ(b, n) (((b) << 5) | (n))
|
|
@@ -82,6 +84,7 @@
|
|
#define NR_BANKS 3
|
|
#define IRQS_PER_BANK 32
|
|
#define NUMBER_IRQS MAKE_HWIRQ(NR_BANKS, 0)
|
|
+#undef FIQ_START
|
|
#define FIQ_START (NR_IRQS_BANK0 + MAKE_HWIRQ(NR_BANKS - 1, 0))
|
|
|
|
static const int reg_pending[] __initconst = { 0x00, 0x04, 0x08 };
|
|
@@ -256,10 +259,12 @@ static int __init armctrl_of_init(struct
|
|
MAKE_HWIRQ(b, i) + NUMBER_IRQS);
|
|
BUG_ON(irq <= 0);
|
|
irq_set_chip(irq, &armctrl_chip);
|
|
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
|
|
+ irq_set_probe(irq);
|
|
}
|
|
}
|
|
+#ifndef CONFIG_ARM64
|
|
init_FIQ(FIQ_START);
|
|
+#endif
|
|
|
|
return 0;
|
|
}
|
|
--- a/drivers/mailbox/bcm2835-mailbox.c
|
|
+++ b/drivers/mailbox/bcm2835-mailbox.c
|
|
@@ -51,12 +51,15 @@
|
|
#define MAIL1_WRT (ARM_0_MAIL1 + 0x00)
|
|
#define MAIL1_STA (ARM_0_MAIL1 + 0x18)
|
|
|
|
+/* On ARCH_BCM270x these come through <linux/interrupt.h> (arm_control.h ) */
|
|
+#ifndef ARM_MS_FULL
|
|
/* Status register: FIFO state. */
|
|
#define ARM_MS_FULL BIT(31)
|
|
#define ARM_MS_EMPTY BIT(30)
|
|
|
|
/* Configuration register: Enable interrupts. */
|
|
#define ARM_MC_IHAVEDATAIRQEN BIT(0)
|
|
+#endif
|
|
|
|
struct bcm2835_mbox {
|
|
void __iomem *regs;
|
|
@@ -151,7 +154,7 @@ static int bcm2835_mbox_probe(struct pla
|
|
return -ENOMEM;
|
|
spin_lock_init(&mbox->lock);
|
|
|
|
- ret = devm_request_irq(dev, irq_of_parse_and_map(dev->of_node, 0),
|
|
+ ret = devm_request_irq(dev, platform_get_irq(pdev, 0),
|
|
bcm2835_mbox_irq, 0, dev_name(dev), mbox);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to register a mailbox IRQ handler: %d\n",
|
|
@@ -209,7 +212,18 @@ static struct platform_driver bcm2835_mb
|
|
.probe = bcm2835_mbox_probe,
|
|
.remove = bcm2835_mbox_remove,
|
|
};
|
|
-module_platform_driver(bcm2835_mbox_driver);
|
|
+
|
|
+static int __init bcm2835_mbox_init(void)
|
|
+{
|
|
+ return platform_driver_register(&bcm2835_mbox_driver);
|
|
+}
|
|
+arch_initcall(bcm2835_mbox_init);
|
|
+
|
|
+static void __init bcm2835_mbox_exit(void)
|
|
+{
|
|
+ platform_driver_unregister(&bcm2835_mbox_driver);
|
|
+}
|
|
+module_exit(bcm2835_mbox_exit);
|
|
|
|
MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>");
|
|
MODULE_DESCRIPTION("BCM2835 mailbox IPC driver");
|