mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 18:19:02 +00:00
9209511d61
This driver has been added instead of improving spi-bcm53xx. It has some advantages: allows SPI speed control & hopefully doesn't have bug that was stopping us from using multiple SPI messages for writing flash data. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
833 lines
22 KiB
Diff
833 lines
22 KiB
Diff
From fa236a7ef24048bafaeed13f68df35a819794758 Mon Sep 17 00:00:00 2001
|
|
From: Kamal Dasu <kdasu.kdev@gmail.com>
|
|
Date: Wed, 24 Aug 2016 18:04:23 -0400
|
|
Subject: [PATCH] spi: bcm-qspi: Add Broadcom MSPI driver
|
|
|
|
Master SPI driver for Broadcom settop, iProc SoCs. The driver
|
|
is used for devices that use SPI protocol on BRCMSTB, NSP, NS2
|
|
SoCs. SoC platform driver call exported porbe(), remove()
|
|
and suspend/resume pm_ops implemented in this common driver.
|
|
|
|
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
|
|
Signed-off-by: Yendapally Reddy Dhananjaya Reddy
|
|
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
---
|
|
drivers/spi/Kconfig | 10 +
|
|
drivers/spi/Makefile | 1 +
|
|
drivers/spi/spi-bcm-qspi.c | 712 +++++++++++++++++++++++++++++++++++++++++++++
|
|
drivers/spi/spi-bcm-qspi.h | 63 ++++
|
|
4 files changed, 786 insertions(+)
|
|
create mode 100644 drivers/spi/spi-bcm-qspi.c
|
|
create mode 100644 drivers/spi/spi-bcm-qspi.h
|
|
|
|
--- a/drivers/spi/Kconfig
|
|
+++ b/drivers/spi/Kconfig
|
|
@@ -147,6 +147,16 @@ config SPI_BCM63XX_HSSPI
|
|
This enables support for the High Speed SPI controller present on
|
|
newer Broadcom BCM63XX SoCs.
|
|
|
|
+config SPI_BCM_QSPI
|
|
+ tristate "Broadcom BSPI and MSPI controller support"
|
|
+ depends on ARCH_BRCMSTB || ARCH_BCM || ARCH_BCM_IPROC || COMPILE_TEST
|
|
+ default ARCH_BCM_IPROC
|
|
+ help
|
|
+ Enables support for the Broadcom SPI flash and MSPI controller.
|
|
+ Select this option for any one of BRCMSTB, iProc NSP and NS2 SoCs
|
|
+ based platforms. This driver works for both SPI master for spi-nor
|
|
+ flash device as well as MSPI device.
|
|
+
|
|
config SPI_BITBANG
|
|
tristate "Utilities for Bitbanging SPI masters"
|
|
help
|
|
--- a/drivers/spi/Makefile
|
|
+++ b/drivers/spi/Makefile
|
|
@@ -19,6 +19,7 @@ obj-$(CONFIG_SPI_BCM2835AUX) += spi-bcm
|
|
obj-$(CONFIG_SPI_BCM53XX) += spi-bcm53xx.o
|
|
obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o
|
|
obj-$(CONFIG_SPI_BCM63XX_HSSPI) += spi-bcm63xx-hsspi.o
|
|
+obj-$(CONFIG_SPI_BCM_QSPI) += spi-bcm-qspi.o
|
|
obj-$(CONFIG_SPI_BFIN5XX) += spi-bfin5xx.o
|
|
obj-$(CONFIG_SPI_ADI_V3) += spi-adi-v3.o
|
|
obj-$(CONFIG_SPI_BFIN_SPORT) += spi-bfin-sport.o
|
|
--- /dev/null
|
|
+++ b/drivers/spi/spi-bcm-qspi.c
|
|
@@ -0,0 +1,712 @@
|
|
+/*
|
|
+ * Driver for Broadcom BRCMSTB, NSP, NS2, Cygnus SPI Controllers
|
|
+ *
|
|
+ * Copyright 2016 Broadcom
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License, version 2, as
|
|
+ * published by the Free Software Foundation (the "GPL").
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful, but
|
|
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
+ * General Public License version 2 (GPLv2) for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License
|
|
+ * version 2 (GPLv2) along with this source code.
|
|
+ */
|
|
+
|
|
+#include <linux/clk.h>
|
|
+#include <linux/delay.h>
|
|
+#include <linux/device.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/io.h>
|
|
+#include <linux/ioport.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/mtd/cfi.h>
|
|
+#include <linux/mtd/spi-nor.h>
|
|
+#include <linux/of.h>
|
|
+#include <linux/of_irq.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/slab.h>
|
|
+#include <linux/spi/spi.h>
|
|
+#include <linux/sysfs.h>
|
|
+#include <linux/types.h>
|
|
+#include "spi-bcm-qspi.h"
|
|
+
|
|
+#define DRIVER_NAME "bcm_qspi"
|
|
+
|
|
+/* MSPI register offsets */
|
|
+#define MSPI_SPCR0_LSB 0x000
|
|
+#define MSPI_SPCR0_MSB 0x004
|
|
+#define MSPI_SPCR1_LSB 0x008
|
|
+#define MSPI_SPCR1_MSB 0x00c
|
|
+#define MSPI_NEWQP 0x010
|
|
+#define MSPI_ENDQP 0x014
|
|
+#define MSPI_SPCR2 0x018
|
|
+#define MSPI_MSPI_STATUS 0x020
|
|
+#define MSPI_CPTQP 0x024
|
|
+#define MSPI_SPCR3 0x028
|
|
+#define MSPI_TXRAM 0x040
|
|
+#define MSPI_RXRAM 0x0c0
|
|
+#define MSPI_CDRAM 0x140
|
|
+#define MSPI_WRITE_LOCK 0x180
|
|
+
|
|
+#define MSPI_MASTER_BIT BIT(7)
|
|
+
|
|
+#define MSPI_NUM_CDRAM 16
|
|
+#define MSPI_CDRAM_CONT_BIT BIT(7)
|
|
+#define MSPI_CDRAM_BITSE_BIT BIT(6)
|
|
+#define MSPI_CDRAM_PCS 0xf
|
|
+
|
|
+#define MSPI_SPCR2_SPE BIT(6)
|
|
+#define MSPI_SPCR2_CONT_AFTER_CMD BIT(7)
|
|
+
|
|
+#define MSPI_MSPI_STATUS_SPIF BIT(0)
|
|
+
|
|
+#define INTR_BASE_BIT_SHIFT 0x02
|
|
+#define INTR_COUNT 0x07
|
|
+
|
|
+#define NUM_CHIPSELECT 4
|
|
+#define QSPI_SPBR_MIN 8U
|
|
+#define QSPI_SPBR_MAX 255U
|
|
+
|
|
+#define OPCODE_DIOR 0xBB
|
|
+#define OPCODE_QIOR 0xEB
|
|
+#define OPCODE_DIOR_4B 0xBC
|
|
+#define OPCODE_QIOR_4B 0xEC
|
|
+
|
|
+#define MAX_CMD_SIZE 6
|
|
+
|
|
+#define ADDR_4MB_MASK GENMASK(22, 0)
|
|
+
|
|
+/* stop at end of transfer, no other reason */
|
|
+#define TRANS_STATUS_BREAK_NONE 0
|
|
+/* stop at end of spi_message */
|
|
+#define TRANS_STATUS_BREAK_EOM 1
|
|
+/* stop at end of spi_transfer if delay */
|
|
+#define TRANS_STATUS_BREAK_DELAY 2
|
|
+/* stop at end of spi_transfer if cs_change */
|
|
+#define TRANS_STATUS_BREAK_CS_CHANGE 4
|
|
+/* stop if we run out of bytes */
|
|
+#define TRANS_STATUS_BREAK_NO_BYTES 8
|
|
+
|
|
+/* events that make us stop filling TX slots */
|
|
+#define TRANS_STATUS_BREAK_TX (TRANS_STATUS_BREAK_EOM | \
|
|
+ TRANS_STATUS_BREAK_DELAY | \
|
|
+ TRANS_STATUS_BREAK_CS_CHANGE)
|
|
+
|
|
+/* events that make us deassert CS */
|
|
+#define TRANS_STATUS_BREAK_DESELECT (TRANS_STATUS_BREAK_EOM | \
|
|
+ TRANS_STATUS_BREAK_CS_CHANGE)
|
|
+
|
|
+struct bcm_qspi_parms {
|
|
+ u32 speed_hz;
|
|
+ u8 mode;
|
|
+ u8 bits_per_word;
|
|
+};
|
|
+
|
|
+enum base_type {
|
|
+ MSPI,
|
|
+ CHIP_SELECT,
|
|
+ BASEMAX,
|
|
+};
|
|
+
|
|
+struct bcm_qspi_irq {
|
|
+ const char *irq_name;
|
|
+ const irq_handler_t irq_handler;
|
|
+ u32 mask;
|
|
+};
|
|
+
|
|
+struct bcm_qspi_dev_id {
|
|
+ const struct bcm_qspi_irq *irqp;
|
|
+ void *dev;
|
|
+};
|
|
+
|
|
+struct qspi_trans {
|
|
+ struct spi_transfer *trans;
|
|
+ int byte;
|
|
+};
|
|
+
|
|
+struct bcm_qspi {
|
|
+ struct platform_device *pdev;
|
|
+ struct spi_master *master;
|
|
+ struct clk *clk;
|
|
+ u32 base_clk;
|
|
+ u32 max_speed_hz;
|
|
+ void __iomem *base[BASEMAX];
|
|
+ struct bcm_qspi_parms last_parms;
|
|
+ struct qspi_trans trans_pos;
|
|
+ int curr_cs;
|
|
+ u32 s3_strap_override_ctrl;
|
|
+ bool big_endian;
|
|
+ int num_irqs;
|
|
+ struct bcm_qspi_dev_id *dev_ids;
|
|
+ struct completion mspi_done;
|
|
+};
|
|
+
|
|
+/* Read qspi controller register*/
|
|
+static inline u32 bcm_qspi_read(struct bcm_qspi *qspi, enum base_type type,
|
|
+ unsigned int offset)
|
|
+{
|
|
+ return bcm_qspi_readl(qspi->big_endian, qspi->base[type] + offset);
|
|
+}
|
|
+
|
|
+/* Write qspi controller register*/
|
|
+static inline void bcm_qspi_write(struct bcm_qspi *qspi, enum base_type type,
|
|
+ unsigned int offset, unsigned int data)
|
|
+{
|
|
+ bcm_qspi_writel(qspi->big_endian, data, qspi->base[type] + offset);
|
|
+}
|
|
+
|
|
+static void bcm_qspi_chip_select(struct bcm_qspi *qspi, int cs)
|
|
+{
|
|
+ u32 data = 0;
|
|
+
|
|
+ if (qspi->curr_cs == cs)
|
|
+ return;
|
|
+ if (qspi->base[CHIP_SELECT]) {
|
|
+ data = bcm_qspi_read(qspi, CHIP_SELECT, 0);
|
|
+ data = (data & ~0xff) | (1 << cs);
|
|
+ bcm_qspi_write(qspi, CHIP_SELECT, 0, data);
|
|
+ usleep_range(10, 20);
|
|
+ }
|
|
+ qspi->curr_cs = cs;
|
|
+}
|
|
+
|
|
+/* MSPI helpers */
|
|
+static void bcm_qspi_hw_set_parms(struct bcm_qspi *qspi,
|
|
+ const struct bcm_qspi_parms *xp)
|
|
+{
|
|
+ u32 spcr, spbr = 0;
|
|
+
|
|
+ if (xp->speed_hz)
|
|
+ spbr = qspi->base_clk / (2 * xp->speed_hz);
|
|
+
|
|
+ spcr = clamp_val(spbr, QSPI_SPBR_MIN, QSPI_SPBR_MAX);
|
|
+ bcm_qspi_write(qspi, MSPI, MSPI_SPCR0_LSB, spcr);
|
|
+
|
|
+ spcr = MSPI_MASTER_BIT;
|
|
+ /* for 16 bit the data should be zero */
|
|
+ if (xp->bits_per_word != 16)
|
|
+ spcr |= xp->bits_per_word << 2;
|
|
+ spcr |= xp->mode & 3;
|
|
+ bcm_qspi_write(qspi, MSPI, MSPI_SPCR0_MSB, spcr);
|
|
+
|
|
+ qspi->last_parms = *xp;
|
|
+}
|
|
+
|
|
+static void bcm_qspi_update_parms(struct bcm_qspi *qspi,
|
|
+ struct spi_device *spi,
|
|
+ struct spi_transfer *trans)
|
|
+{
|
|
+ struct bcm_qspi_parms xp;
|
|
+
|
|
+ xp.speed_hz = trans->speed_hz;
|
|
+ xp.bits_per_word = trans->bits_per_word;
|
|
+ xp.mode = spi->mode;
|
|
+
|
|
+ bcm_qspi_hw_set_parms(qspi, &xp);
|
|
+}
|
|
+
|
|
+static int bcm_qspi_setup(struct spi_device *spi)
|
|
+{
|
|
+ struct bcm_qspi_parms *xp;
|
|
+
|
|
+ if (spi->bits_per_word > 16)
|
|
+ return -EINVAL;
|
|
+
|
|
+ xp = spi_get_ctldata(spi);
|
|
+ if (!xp) {
|
|
+ xp = kzalloc(sizeof(*xp), GFP_KERNEL);
|
|
+ if (!xp)
|
|
+ return -ENOMEM;
|
|
+ spi_set_ctldata(spi, xp);
|
|
+ }
|
|
+ xp->speed_hz = spi->max_speed_hz;
|
|
+ xp->mode = spi->mode;
|
|
+
|
|
+ if (spi->bits_per_word)
|
|
+ xp->bits_per_word = spi->bits_per_word;
|
|
+ else
|
|
+ xp->bits_per_word = 8;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int update_qspi_trans_byte_count(struct bcm_qspi *qspi,
|
|
+ struct qspi_trans *qt, int flags)
|
|
+{
|
|
+ int ret = TRANS_STATUS_BREAK_NONE;
|
|
+
|
|
+ /* count the last transferred bytes */
|
|
+ if (qt->trans->bits_per_word <= 8)
|
|
+ qt->byte++;
|
|
+ else
|
|
+ qt->byte += 2;
|
|
+
|
|
+ if (qt->byte >= qt->trans->len) {
|
|
+ /* we're at the end of the spi_transfer */
|
|
+
|
|
+ /* in TX mode, need to pause for a delay or CS change */
|
|
+ if (qt->trans->delay_usecs &&
|
|
+ (flags & TRANS_STATUS_BREAK_DELAY))
|
|
+ ret |= TRANS_STATUS_BREAK_DELAY;
|
|
+ if (qt->trans->cs_change &&
|
|
+ (flags & TRANS_STATUS_BREAK_CS_CHANGE))
|
|
+ ret |= TRANS_STATUS_BREAK_CS_CHANGE;
|
|
+ if (ret)
|
|
+ goto done;
|
|
+
|
|
+ dev_dbg(&qspi->pdev->dev, "advance msg exit\n");
|
|
+ if (spi_transfer_is_last(qspi->master, qt->trans))
|
|
+ ret = TRANS_STATUS_BREAK_EOM;
|
|
+ else
|
|
+ ret = TRANS_STATUS_BREAK_NO_BYTES;
|
|
+
|
|
+ qt->trans = NULL;
|
|
+ }
|
|
+
|
|
+done:
|
|
+ dev_dbg(&qspi->pdev->dev, "trans %p len %d byte %d ret %x\n",
|
|
+ qt->trans, qt->trans ? qt->trans->len : 0, qt->byte, ret);
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static inline u8 read_rxram_slot_u8(struct bcm_qspi *qspi, int slot)
|
|
+{
|
|
+ u32 slot_offset = MSPI_RXRAM + (slot << 3) + 0x4;
|
|
+
|
|
+ /* mask out reserved bits */
|
|
+ return bcm_qspi_read(qspi, MSPI, slot_offset) & 0xff;
|
|
+}
|
|
+
|
|
+static inline u16 read_rxram_slot_u16(struct bcm_qspi *qspi, int slot)
|
|
+{
|
|
+ u32 reg_offset = MSPI_RXRAM;
|
|
+ u32 lsb_offset = reg_offset + (slot << 3) + 0x4;
|
|
+ u32 msb_offset = reg_offset + (slot << 3);
|
|
+
|
|
+ return (bcm_qspi_read(qspi, MSPI, lsb_offset) & 0xff) |
|
|
+ ((bcm_qspi_read(qspi, MSPI, msb_offset) & 0xff) << 8);
|
|
+}
|
|
+
|
|
+static void read_from_hw(struct bcm_qspi *qspi, int slots)
|
|
+{
|
|
+ struct qspi_trans tp;
|
|
+ int slot;
|
|
+
|
|
+ if (slots > MSPI_NUM_CDRAM) {
|
|
+ /* should never happen */
|
|
+ dev_err(&qspi->pdev->dev, "%s: too many slots!\n", __func__);
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ tp = qspi->trans_pos;
|
|
+
|
|
+ for (slot = 0; slot < slots; slot++) {
|
|
+ if (tp.trans->bits_per_word <= 8) {
|
|
+ u8 *buf = tp.trans->rx_buf;
|
|
+
|
|
+ if (buf)
|
|
+ buf[tp.byte] = read_rxram_slot_u8(qspi, slot);
|
|
+ dev_dbg(&qspi->pdev->dev, "RD %02x\n",
|
|
+ buf ? buf[tp.byte] : 0xff);
|
|
+ } else {
|
|
+ u16 *buf = tp.trans->rx_buf;
|
|
+
|
|
+ if (buf)
|
|
+ buf[tp.byte / 2] = read_rxram_slot_u16(qspi,
|
|
+ slot);
|
|
+ dev_dbg(&qspi->pdev->dev, "RD %04x\n",
|
|
+ buf ? buf[tp.byte] : 0xffff);
|
|
+ }
|
|
+
|
|
+ update_qspi_trans_byte_count(qspi, &tp,
|
|
+ TRANS_STATUS_BREAK_NONE);
|
|
+ }
|
|
+
|
|
+ qspi->trans_pos = tp;
|
|
+}
|
|
+
|
|
+static inline void write_txram_slot_u8(struct bcm_qspi *qspi, int slot,
|
|
+ u8 val)
|
|
+{
|
|
+ u32 reg_offset = MSPI_TXRAM + (slot << 3);
|
|
+
|
|
+ /* mask out reserved bits */
|
|
+ bcm_qspi_write(qspi, MSPI, reg_offset, val);
|
|
+}
|
|
+
|
|
+static inline void write_txram_slot_u16(struct bcm_qspi *qspi, int slot,
|
|
+ u16 val)
|
|
+{
|
|
+ u32 reg_offset = MSPI_TXRAM;
|
|
+ u32 msb_offset = reg_offset + (slot << 3);
|
|
+ u32 lsb_offset = reg_offset + (slot << 3) + 0x4;
|
|
+
|
|
+ bcm_qspi_write(qspi, MSPI, msb_offset, (val >> 8));
|
|
+ bcm_qspi_write(qspi, MSPI, lsb_offset, (val & 0xff));
|
|
+}
|
|
+
|
|
+static inline u32 read_cdram_slot(struct bcm_qspi *qspi, int slot)
|
|
+{
|
|
+ return bcm_qspi_read(qspi, MSPI, MSPI_CDRAM + (slot << 2));
|
|
+}
|
|
+
|
|
+static inline void write_cdram_slot(struct bcm_qspi *qspi, int slot, u32 val)
|
|
+{
|
|
+ bcm_qspi_write(qspi, MSPI, (MSPI_CDRAM + (slot << 2)), val);
|
|
+}
|
|
+
|
|
+/* Return number of slots written */
|
|
+static int write_to_hw(struct bcm_qspi *qspi, struct spi_device *spi)
|
|
+{
|
|
+ struct qspi_trans tp;
|
|
+ int slot = 0, tstatus = 0;
|
|
+ u32 mspi_cdram = 0;
|
|
+
|
|
+ tp = qspi->trans_pos;
|
|
+ bcm_qspi_update_parms(qspi, spi, tp.trans);
|
|
+
|
|
+ /* Run until end of transfer or reached the max data */
|
|
+ while (!tstatus && slot < MSPI_NUM_CDRAM) {
|
|
+ if (tp.trans->bits_per_word <= 8) {
|
|
+ const u8 *buf = tp.trans->tx_buf;
|
|
+ u8 val = buf ? buf[tp.byte] : 0xff;
|
|
+
|
|
+ write_txram_slot_u8(qspi, slot, val);
|
|
+ dev_dbg(&qspi->pdev->dev, "WR %02x\n", val);
|
|
+ } else {
|
|
+ const u16 *buf = tp.trans->tx_buf;
|
|
+ u16 val = buf ? buf[tp.byte / 2] : 0xffff;
|
|
+
|
|
+ write_txram_slot_u16(qspi, slot, val);
|
|
+ dev_dbg(&qspi->pdev->dev, "WR %04x\n", val);
|
|
+ }
|
|
+ mspi_cdram = MSPI_CDRAM_CONT_BIT;
|
|
+ mspi_cdram |= (~(1 << spi->chip_select) &
|
|
+ MSPI_CDRAM_PCS);
|
|
+ mspi_cdram |= ((tp.trans->bits_per_word <= 8) ? 0 :
|
|
+ MSPI_CDRAM_BITSE_BIT);
|
|
+
|
|
+ write_cdram_slot(qspi, slot, mspi_cdram);
|
|
+
|
|
+ tstatus = update_qspi_trans_byte_count(qspi, &tp,
|
|
+ TRANS_STATUS_BREAK_TX);
|
|
+ slot++;
|
|
+ }
|
|
+
|
|
+ if (!slot) {
|
|
+ dev_err(&qspi->pdev->dev, "%s: no data to send?", __func__);
|
|
+ goto done;
|
|
+ }
|
|
+
|
|
+ dev_dbg(&qspi->pdev->dev, "submitting %d slots\n", slot);
|
|
+ bcm_qspi_write(qspi, MSPI, MSPI_NEWQP, 0);
|
|
+ bcm_qspi_write(qspi, MSPI, MSPI_ENDQP, slot - 1);
|
|
+
|
|
+ if (tstatus & TRANS_STATUS_BREAK_DESELECT) {
|
|
+ mspi_cdram = read_cdram_slot(qspi, slot - 1) &
|
|
+ ~MSPI_CDRAM_CONT_BIT;
|
|
+ write_cdram_slot(qspi, slot - 1, mspi_cdram);
|
|
+ }
|
|
+
|
|
+ /* Must flush previous writes before starting MSPI operation */
|
|
+ mb();
|
|
+ /* Set cont | spe | spifie */
|
|
+ bcm_qspi_write(qspi, MSPI, MSPI_SPCR2, 0xe0);
|
|
+
|
|
+done:
|
|
+ return slot;
|
|
+}
|
|
+
|
|
+static int bcm_qspi_transfer_one(struct spi_master *master,
|
|
+ struct spi_device *spi,
|
|
+ struct spi_transfer *trans)
|
|
+{
|
|
+ struct bcm_qspi *qspi = spi_master_get_devdata(master);
|
|
+ int slots;
|
|
+ unsigned long timeo = msecs_to_jiffies(100);
|
|
+
|
|
+ bcm_qspi_chip_select(qspi, spi->chip_select);
|
|
+ qspi->trans_pos.trans = trans;
|
|
+ qspi->trans_pos.byte = 0;
|
|
+
|
|
+ while (qspi->trans_pos.byte < trans->len) {
|
|
+ reinit_completion(&qspi->mspi_done);
|
|
+
|
|
+ slots = write_to_hw(qspi, spi);
|
|
+ if (!wait_for_completion_timeout(&qspi->mspi_done, timeo)) {
|
|
+ dev_err(&qspi->pdev->dev, "timeout waiting for MSPI\n");
|
|
+ return -ETIMEDOUT;
|
|
+ }
|
|
+
|
|
+ read_from_hw(qspi, slots);
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void bcm_qspi_cleanup(struct spi_device *spi)
|
|
+{
|
|
+ struct bcm_qspi_parms *xp = spi_get_ctldata(spi);
|
|
+
|
|
+ kfree(xp);
|
|
+}
|
|
+
|
|
+static irqreturn_t bcm_qspi_mspi_l2_isr(int irq, void *dev_id)
|
|
+{
|
|
+ struct bcm_qspi_dev_id *qspi_dev_id = dev_id;
|
|
+ struct bcm_qspi *qspi = qspi_dev_id->dev;
|
|
+ u32 status = bcm_qspi_read(qspi, MSPI, MSPI_MSPI_STATUS);
|
|
+
|
|
+ if (status & MSPI_MSPI_STATUS_SPIF) {
|
|
+ /* clear interrupt */
|
|
+ status &= ~MSPI_MSPI_STATUS_SPIF;
|
|
+ bcm_qspi_write(qspi, MSPI, MSPI_MSPI_STATUS, status);
|
|
+ complete(&qspi->mspi_done);
|
|
+ return IRQ_HANDLED;
|
|
+ } else {
|
|
+ return IRQ_NONE;
|
|
+ }
|
|
+}
|
|
+
|
|
+static const struct bcm_qspi_irq qspi_irq_tab[] = {
|
|
+ {
|
|
+ .irq_name = "mspi_done",
|
|
+ .irq_handler = bcm_qspi_mspi_l2_isr,
|
|
+ .mask = INTR_MSPI_DONE_MASK,
|
|
+ },
|
|
+ {
|
|
+ .irq_name = "mspi_halted",
|
|
+ .irq_handler = bcm_qspi_mspi_l2_isr,
|
|
+ .mask = INTR_MSPI_HALTED_MASK,
|
|
+ },
|
|
+};
|
|
+
|
|
+static void bcm_qspi_hw_init(struct bcm_qspi *qspi)
|
|
+{
|
|
+ struct bcm_qspi_parms parms;
|
|
+
|
|
+ bcm_qspi_write(qspi, MSPI, MSPI_SPCR1_LSB, 0);
|
|
+ bcm_qspi_write(qspi, MSPI, MSPI_SPCR1_MSB, 0);
|
|
+ bcm_qspi_write(qspi, MSPI, MSPI_NEWQP, 0);
|
|
+ bcm_qspi_write(qspi, MSPI, MSPI_ENDQP, 0);
|
|
+ bcm_qspi_write(qspi, MSPI, MSPI_SPCR2, 0x20);
|
|
+
|
|
+ parms.mode = SPI_MODE_3;
|
|
+ parms.bits_per_word = 8;
|
|
+ parms.speed_hz = qspi->max_speed_hz;
|
|
+ bcm_qspi_hw_set_parms(qspi, &parms);
|
|
+}
|
|
+
|
|
+static void bcm_qspi_hw_uninit(struct bcm_qspi *qspi)
|
|
+{
|
|
+ bcm_qspi_write(qspi, MSPI, MSPI_SPCR2, 0);
|
|
+}
|
|
+
|
|
+static const struct of_device_id bcm_qspi_of_match[] = {
|
|
+ { .compatible = "brcm,spi-bcm-qspi" },
|
|
+ {},
|
|
+};
|
|
+MODULE_DEVICE_TABLE(of, bcm_qspi_of_match);
|
|
+
|
|
+int bcm_qspi_probe(struct platform_device *pdev,
|
|
+ struct bcm_qspi_soc_intc *soc)
|
|
+{
|
|
+ struct device *dev = &pdev->dev;
|
|
+ struct bcm_qspi *qspi;
|
|
+ struct spi_master *master;
|
|
+ struct resource *res;
|
|
+ int irq, ret = 0, num_ints = 0;
|
|
+ u32 val;
|
|
+ const char *name = NULL;
|
|
+ int num_irqs = ARRAY_SIZE(qspi_irq_tab);
|
|
+
|
|
+ /* We only support device-tree instantiation */
|
|
+ if (!dev->of_node)
|
|
+ return -ENODEV;
|
|
+
|
|
+ if (!of_match_node(bcm_qspi_of_match, dev->of_node))
|
|
+ return -ENODEV;
|
|
+
|
|
+ master = spi_alloc_master(dev, sizeof(struct bcm_qspi));
|
|
+ if (!master) {
|
|
+ dev_err(dev, "error allocating spi_master\n");
|
|
+ return -ENOMEM;
|
|
+ }
|
|
+
|
|
+ qspi = spi_master_get_devdata(master);
|
|
+ qspi->pdev = pdev;
|
|
+ qspi->trans_pos.trans = NULL;
|
|
+ qspi->trans_pos.byte = 0;
|
|
+ qspi->master = master;
|
|
+
|
|
+ master->bus_num = -1;
|
|
+ master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_RX_DUAL | SPI_RX_QUAD;
|
|
+ master->setup = bcm_qspi_setup;
|
|
+ master->transfer_one = bcm_qspi_transfer_one;
|
|
+ master->cleanup = bcm_qspi_cleanup;
|
|
+ master->dev.of_node = dev->of_node;
|
|
+ master->num_chipselect = NUM_CHIPSELECT;
|
|
+
|
|
+ qspi->big_endian = of_device_is_big_endian(dev->of_node);
|
|
+
|
|
+ if (!of_property_read_u32(dev->of_node, "num-cs", &val))
|
|
+ master->num_chipselect = val;
|
|
+
|
|
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hif_mspi");
|
|
+ if (!res)
|
|
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
|
|
+ "mspi");
|
|
+
|
|
+ if (res) {
|
|
+ qspi->base[MSPI] = devm_ioremap_resource(dev, res);
|
|
+ if (IS_ERR(qspi->base[MSPI])) {
|
|
+ ret = PTR_ERR(qspi->base[MSPI]);
|
|
+ goto qspi_probe_err;
|
|
+ }
|
|
+ } else {
|
|
+ goto qspi_probe_err;
|
|
+ }
|
|
+
|
|
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cs_reg");
|
|
+ if (res) {
|
|
+ qspi->base[CHIP_SELECT] = devm_ioremap_resource(dev, res);
|
|
+ if (IS_ERR(qspi->base[CHIP_SELECT])) {
|
|
+ ret = PTR_ERR(qspi->base[CHIP_SELECT]);
|
|
+ goto qspi_probe_err;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ qspi->dev_ids = kcalloc(num_irqs, sizeof(struct bcm_qspi_dev_id),
|
|
+ GFP_KERNEL);
|
|
+ if (IS_ERR(qspi->dev_ids)) {
|
|
+ ret = PTR_ERR(qspi->dev_ids);
|
|
+ goto qspi_probe_err;
|
|
+ }
|
|
+
|
|
+ for (val = 0; val < num_irqs; val++) {
|
|
+ irq = -1;
|
|
+ name = qspi_irq_tab[val].irq_name;
|
|
+ irq = platform_get_irq_byname(pdev, name);
|
|
+
|
|
+ if (irq >= 0) {
|
|
+ ret = devm_request_irq(&pdev->dev, irq,
|
|
+ qspi_irq_tab[val].irq_handler, 0,
|
|
+ name,
|
|
+ &qspi->dev_ids[val]);
|
|
+ if (ret < 0) {
|
|
+ dev_err(&pdev->dev, "IRQ %s not found\n", name);
|
|
+ goto qspi_probe_err;
|
|
+ }
|
|
+
|
|
+ qspi->dev_ids[val].dev = qspi;
|
|
+ qspi->dev_ids[val].irqp = &qspi_irq_tab[val];
|
|
+ num_ints++;
|
|
+ dev_dbg(&pdev->dev, "registered IRQ %s %d\n",
|
|
+ qspi_irq_tab[val].irq_name,
|
|
+ irq);
|
|
+ }
|
|
+ }
|
|
+
|
|
+ if (!num_ints) {
|
|
+ dev_err(&pdev->dev, "no IRQs registered, cannot init driver\n");
|
|
+ goto qspi_probe_err;
|
|
+ }
|
|
+
|
|
+ qspi->clk = devm_clk_get(&pdev->dev, NULL);
|
|
+ if (IS_ERR(qspi->clk)) {
|
|
+ dev_warn(dev, "unable to get clock\n");
|
|
+ goto qspi_probe_err;
|
|
+ }
|
|
+
|
|
+ ret = clk_prepare_enable(qspi->clk);
|
|
+ if (ret) {
|
|
+ dev_err(dev, "failed to prepare clock\n");
|
|
+ goto qspi_probe_err;
|
|
+ }
|
|
+
|
|
+ qspi->base_clk = clk_get_rate(qspi->clk);
|
|
+ qspi->max_speed_hz = qspi->base_clk / (QSPI_SPBR_MIN * 2);
|
|
+
|
|
+ bcm_qspi_hw_init(qspi);
|
|
+ init_completion(&qspi->mspi_done);
|
|
+ qspi->curr_cs = -1;
|
|
+
|
|
+ platform_set_drvdata(pdev, qspi);
|
|
+ ret = devm_spi_register_master(&pdev->dev, master);
|
|
+ if (ret < 0) {
|
|
+ dev_err(dev, "can't register master\n");
|
|
+ goto qspi_reg_err;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+
|
|
+qspi_reg_err:
|
|
+ bcm_qspi_hw_uninit(qspi);
|
|
+ clk_disable_unprepare(qspi->clk);
|
|
+qspi_probe_err:
|
|
+ spi_master_put(master);
|
|
+ kfree(qspi->dev_ids);
|
|
+ return ret;
|
|
+}
|
|
+/* probe function to be called by SoC specific platform driver probe */
|
|
+EXPORT_SYMBOL_GPL(bcm_qspi_probe);
|
|
+
|
|
+int bcm_qspi_remove(struct platform_device *pdev)
|
|
+{
|
|
+ struct bcm_qspi *qspi = platform_get_drvdata(pdev);
|
|
+
|
|
+ platform_set_drvdata(pdev, NULL);
|
|
+ bcm_qspi_hw_uninit(qspi);
|
|
+ clk_disable_unprepare(qspi->clk);
|
|
+ kfree(qspi->dev_ids);
|
|
+ spi_unregister_master(qspi->master);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+/* function to be called by SoC specific platform driver remove() */
|
|
+EXPORT_SYMBOL_GPL(bcm_qspi_remove);
|
|
+
|
|
+#ifdef CONFIG_PM_SLEEP
|
|
+static int bcm_qspi_suspend(struct device *dev)
|
|
+{
|
|
+ struct bcm_qspi *qspi = dev_get_drvdata(dev);
|
|
+
|
|
+ spi_master_suspend(qspi->master);
|
|
+ clk_disable(qspi->clk);
|
|
+ bcm_qspi_hw_uninit(qspi);
|
|
+
|
|
+ return 0;
|
|
+};
|
|
+
|
|
+static int bcm_qspi_resume(struct device *dev)
|
|
+{
|
|
+ struct bcm_qspi *qspi = dev_get_drvdata(dev);
|
|
+ int ret = 0;
|
|
+
|
|
+ bcm_qspi_hw_init(qspi);
|
|
+ bcm_qspi_chip_select(qspi, qspi->curr_cs);
|
|
+ ret = clk_enable(qspi->clk);
|
|
+ if (!ret)
|
|
+ spi_master_resume(qspi->master);
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+#endif /* CONFIG_PM_SLEEP */
|
|
+
|
|
+const struct dev_pm_ops bcm_qspi_pm_ops = {
|
|
+ .suspend = bcm_qspi_suspend,
|
|
+ .resume = bcm_qspi_resume,
|
|
+};
|
|
+/* pm_ops to be called by SoC specific platform driver */
|
|
+EXPORT_SYMBOL_GPL(bcm_qspi_pm_ops);
|
|
+
|
|
+MODULE_AUTHOR("Kamal Dasu");
|
|
+MODULE_DESCRIPTION("Broadcom QSPI driver");
|
|
+MODULE_LICENSE("GPL v2");
|
|
+MODULE_ALIAS("platform:" DRIVER_NAME);
|
|
--- /dev/null
|
|
+++ b/drivers/spi/spi-bcm-qspi.h
|
|
@@ -0,0 +1,63 @@
|
|
+/*
|
|
+ * Copyright 2016 Broadcom
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License, version 2, as
|
|
+ * published by the Free Software Foundation (the "GPL").
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful, but
|
|
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
+ * General Public License version 2 (GPLv2) for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License
|
|
+ * version 2 (GPLv2) along with this source code.
|
|
+ */
|
|
+
|
|
+#ifndef __SPI_BCM_QSPI_H__
|
|
+#define __SPI_BCM_QSPI_H__
|
|
+
|
|
+#include <linux/types.h>
|
|
+#include <linux/io.h>
|
|
+
|
|
+/* MSPI Interrupt masks */
|
|
+#define INTR_MSPI_HALTED_MASK BIT(6)
|
|
+#define INTR_MSPI_DONE_MASK BIT(5)
|
|
+
|
|
+#define MSPI_INTERRUPTS_ALL \
|
|
+ (INTR_MSPI_DONE_MASK | \
|
|
+ INTR_MSPI_HALTED_MASK)
|
|
+
|
|
+struct platform_device;
|
|
+struct dev_pm_ops;
|
|
+
|
|
+struct bcm_qspi_soc_intc;
|
|
+
|
|
+/* Read controller register*/
|
|
+static inline u32 bcm_qspi_readl(bool be, void __iomem *addr)
|
|
+{
|
|
+ if (be)
|
|
+ return ioread32be(addr);
|
|
+ else
|
|
+ return readl_relaxed(addr);
|
|
+}
|
|
+
|
|
+/* Write controller register*/
|
|
+static inline void bcm_qspi_writel(bool be,
|
|
+ unsigned int data, void __iomem *addr)
|
|
+{
|
|
+ if (be)
|
|
+ iowrite32be(data, addr);
|
|
+ else
|
|
+ writel_relaxed(data, addr);
|
|
+}
|
|
+
|
|
+/* The common driver functions to be called by the SoC platform driver */
|
|
+int bcm_qspi_probe(struct platform_device *pdev,
|
|
+ struct bcm_qspi_soc_intc *soc_intc);
|
|
+int bcm_qspi_remove(struct platform_device *pdev);
|
|
+
|
|
+/* pm_ops used by the SoC platform driver called on PM suspend/resume */
|
|
+extern const struct dev_pm_ops bcm_qspi_pm_ops;
|
|
+
|
|
+#endif /* __SPI_BCM_QSPI_H__ */
|